BladeHQ PM2 Aluminum-scale Exclusive
Re: BladeHQ PM2 Aluminum-scale Exclusive
Agreed. It should have been a much nicer steel, cost less, and should have also doubled as a periscope.
-
- Member
- Posts: 357
- Joined: Sat Apr 07, 2018 12:51 pm
Re: BladeHQ PM2 Aluminum-scale Exclusive
I for one am pretty excited for this release! One of my favorite Spydercos, and unfortunately the one I regret selling most was my fluted titanium native 5. I loved the maching on the scales, and I am sure these aluminum ones are going to meet, or surpass that quality. Also, linerless sounds awesome and besides being lighter I bet it will feel overall more "sturdy" / "rigid".
Pictured below is my very first Golden, Co Spyderco a Paramilitary 2. A short time down the road I decided to swap over to a set of aluminum Flytanium scales. However, instead of being linerless like tomorrow's exclusive these have the liners inside them making the overall knife heavier / beefy. Not sure if they are the same type of aluminum, but I am excited to get this exclusive in hand to compare the two!
Pictured below is my very first Golden, Co Spyderco a Paramilitary 2. A short time down the road I decided to swap over to a set of aluminum Flytanium scales. However, instead of being linerless like tomorrow's exclusive these have the liners inside them making the overall knife heavier / beefy. Not sure if they are the same type of aluminum, but I am excited to get this exclusive in hand to compare the two!
Re: BladeHQ PM2 Aluminum-scale Exclusive
We still are waiting for the laser...
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: BladeHQ PM2 Aluminum-scale Exclusive
Forgot about that thread. They need to join the MNOSD.
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
-
- Member
- Posts: 34
- Joined: Wed Feb 24, 2021 9:59 pm
Re: BladeHQ PM2 Aluminum-scale Exclusive
Well, I guess my fears of this shutting down the BHQ site were unfounded hahah...
I was able to get a green one without any issue at all right at 10 am MST and they're still in stock well after the fact..
I was able to get a green one without any issue at all right at 10 am MST and they're still in stock well after the fact..
Rick H.
..well, that escalated quickly..
..well, that escalated quickly..
Re: BladeHQ PM2 Aluminum-scale Exclusive
Purple now Sold Out, kind of surprised actually....
Re: BladeHQ PM2 Aluminum-scale Exclusive
Are these ongoing or a one off?
Re: BladeHQ PM2 Aluminum-scale Exclusive
I didn’t buy one but purple would have been my first choice too.
-Nick
-
- Member
- Posts: 112
- Joined: Fri Dec 04, 2020 9:50 pm
Re: BladeHQ PM2 Aluminum-scale Exclusive
I'm surprised it wasn't featured on a youtube video before launch. All we had was the pictures posted. So many pm2 sprint runs in 2021.
Re: BladeHQ PM2 Aluminum-scale Exclusive
I broke down and ordered the green one. Earlier I decided I was going to get one. Then I decided I should just use what I have. But then I don't currently own a PM2. I was busy with work at launch, so I figured they would be gone. And then there they were. I held out as long as I could. I am a weak man.
- VooDooChild
- Member
- Posts: 2623
- Joined: Wed Feb 21, 2018 1:29 am
Re: BladeHQ PM2 Aluminum-scale Exclusive
I got a green one. I actually think these will be a sleeper hit after theyre gone.
I like pm2.
I like titanium/steel/aluminum handles just fine.
I like bd1n as an everyday user steel. Its just soooo easy to sharpen, even for us folk who arent good at sharpening.
I like that its somehow lighter than the standard pm2. Ill consider this the pre pm2 lightweight.
I like the handle milling and how the pattern looks.
Price is reasonable.
Ive held off on the last several pm2 exclusives but this picture sold it for me.
Also... I have no idea what the future might hold for an frn pm2 lightweight but, this is probably the last non-frn pm2 that will ever be priced below $150.
I like pm2.
I like titanium/steel/aluminum handles just fine.
I like bd1n as an everyday user steel. Its just soooo easy to sharpen, even for us folk who arent good at sharpening.
I like that its somehow lighter than the standard pm2. Ill consider this the pre pm2 lightweight.
I like the handle milling and how the pattern looks.
Price is reasonable.
Ive held off on the last several pm2 exclusives but this picture sold it for me.
Also... I have no idea what the future might hold for an frn pm2 lightweight but, this is probably the last non-frn pm2 that will ever be priced below $150.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: BladeHQ PM2 Aluminum-scale Exclusive
I like aluminum just fine in smaller models, 3 inch or under, so hopefully these sell well enough to have other models made as exclusives. Let's cross our fingers that aluminum is not now exclusive to BHQ.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: BladeHQ PM2 Aluminum-scale Exclusive
These BladeHQ Exclusive ParaMilitary2 are/were in stock:
- ParaMilitary2 CTS-BD1N Satin PlainEdge Blade "Cosmic Arc" Textured Purple Aluminum C81ALPBK2 BladeHQ (USA)
- ParaMilitary2 CTS-BD1N Satin PlainEdge Blade "Cosmic Arc" Textured Blue Aluminum C81ALPBL2 BladeHQ (USA)
- ParaMilitary2 CTS-BD1N Satin PlainEdge Blade "Cosmic Arc" Textured Green Aluminum C81ALPGR2 BladeHQ (USA)
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: BladeHQ PM2 Aluminum-scale Exclusive
I need to see it in a real photo. For a while I couldn't tell if it was just moire defects or actually the pattern
Re: BladeHQ PM2 Aluminum-scale Exclusive
I think the ideal move would have been to get all three and mix up the scales.
Re: BladeHQ PM2 Aluminum-scale Exclusive
No, those aren't moire artifacts but part of its actual pattern, Mushroom pointed it out earlier in this thread and seeing the close up pics confirmed this.
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet
Re: BladeHQ PM2 Aluminum-scale Exclusive
Looks like these were a good sell! Good job BHQ
So many knives - so little funds!!!
- VooDooChild
- Member
- Posts: 2623
- Joined: Wed Feb 21, 2018 1:29 am
Re: BladeHQ PM2 Aluminum-scale Exclusive
I thought they would stick around a little longer. Cant wait for my green one.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
- Capt'n Boatsalot
- Member
- Posts: 659
- Joined: Mon Apr 15, 2013 10:50 pm
- Location: Iowa
Re: BladeHQ PM2 Aluminum-scale Exclusive
I am also surprised that these sold out as quickly as they did. Apparently the right combination of novel/Interesting scale, low price, and incredibly popular design. Different steel helps too, even if not a more popular one.
Nice work BHQ.
Nice work BHQ.
MNOSD member 0030