How to take apart the Atlantic Salt LC200N???
- bruce91748
- Member
- Posts: 40
- Joined: Wed Nov 04, 2020 5:32 pm
How to take apart the Atlantic Salt LC200N???
Looks like the construction of the Atlantic Salt 2 is slightly different than the Pacific Salt 2 and the Salt 2. Aside from the clip being held to the scales by a pair of barrel couplers, the FRN scales seem to have been fused together at the end and I'm not able to pry them apart. How do you guys get the scales apart? BTW at first I didn't like the shape of the blade in pictures or videos but now after holding it for a few hours, it's growing on me.
- VooDooChild
- Member
- Posts: 2623
- Joined: Wed Feb 21, 2018 1:29 am
Re: How to take apart the Atlantic Salt LC200N???
They dont come apart.
Take out the pivot pin and the lockbar pin.
When you unscrew those pins the blade and lockbar will slide out. The spring can be pulled out of its housing.
Thats it.
Theres the blade, lockbar, spring, pins, and one piece handle.
Take out the pivot pin and the lockbar pin.
When you unscrew those pins the blade and lockbar will slide out. The spring can be pulled out of its housing.
Thats it.
Theres the blade, lockbar, spring, pins, and one piece handle.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
- Doc Dan
- Member
- Posts: 14835
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: How to take apart the Atlantic Salt LC200N???
I agree the blade kind of grows on you. But, I am still thinking of getting one and modding the blade to a pointed wharcliffe.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: How to take apart the Atlantic Salt LC200N???
Now that's a used blade!
Congrats
-
- Member
- Posts: 5858
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: How to take apart the Atlantic Salt LC200N???
No kidding! What's going on with the serrations? Is that just wear from use or ?
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
- bruce91748
- Member
- Posts: 40
- Joined: Wed Nov 04, 2020 5:32 pm
Re: How to take apart the Atlantic Salt LC200N???
I've been marking the blade w/ markers to decide what shape to go with and may try Zenith's or the Yojimbo shape.
- Doc Dan
- Member
- Posts: 14835
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: How to take apart the Atlantic Salt LC200N???
Nice mod and it looks well used.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: How to take apart the Atlantic Salt LC200N???
Very cool, also the heavy use this thing obviously has seen! :)
One question though: This of course must be the H1 version, right? But I can´t see any hollow grind (perhaps it is just my cell phone screen) - did you make the whole blade thinner too (in its upper part at least)?
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: How to take apart the Atlantic Salt LC200N???
Re: How to take apart the Atlantic Salt LC200N???
Wear and regrinding it.The Meat man wrote: ↑Sun Jun 06, 2021 6:17 pmNo kidding! What's going on with the serrations? Is that just wear from use or ?
Re: How to take apart the Atlantic Salt LC200N???
It has been reground a few times and it has seen years of use. I have also had to regrind the scallops as it was becoming more like a plain edge and had no more sharp teeth.Wartstein wrote: ↑Sun Jun 06, 2021 10:55 pm
Very cool, also the heavy use this thing obviously has seen! :)
One question though: This of course must be the H1 version, right? But I can´t see any hollow grind (perhaps it is just my cell phone screen) - did you make the whole blade thinner too (in its upper part at least)?
I measured the base where the edge was and more than a millimeter of actual teeth have been sharpened away.
It has a very slight taper towards the tip.
- bruce91748
- Member
- Posts: 40
- Joined: Wed Nov 04, 2020 5:32 pm
Re: How to take apart the Atlantic Salt LC200N???
Decided to reprofile the blade and really like the outcome.
Now the Atlantic is a couple tenths of an ounce lighter, smaller in the pocket and prettier.
Now the Atlantic is a couple tenths of an ounce lighter, smaller in the pocket and prettier.