FRN Jester Sprint Input Needed
Re: FRN Jester Sprint Input Needed
I've gone on record saying this on several occasions. The one sector of Spyderco knives I really don't have any need for are their "micro-sized" models. The Ladybug, Manbug, Jester ect. They are just too small for any practical application I could or would use them for. The Caly Jr. is about as small as you'll ever see me go. With the one exception of the Micarta Dyad Jr. model which I would just drool over a Sprint Run of that double bladed Spyder-Icon.
But I will say that at one time due to a lot of trading I was doing around the 2007-2009 time slot that I came across two of the JESTER models in the Burgundy Micarta selection. And when I traded both of them in different trades I had no problem finding interested parties to trade with. They were quite attractive for "micro models". Also I always did like the overall blade design of the JESTER better than I did any of the other small Spyders.
My vote for a Sprint Run JESTER would be that Burgundy Micarta version. But I'm sure most of you already have your favorites picked out. But I did remember that one small Spyder better than I did any of the others I had at that time.
But I will say that at one time due to a lot of trading I was doing around the 2007-2009 time slot that I came across two of the JESTER models in the Burgundy Micarta selection. And when I traded both of them in different trades I had no problem finding interested parties to trade with. They were quite attractive for "micro models". Also I always did like the overall blade design of the JESTER better than I did any of the other small Spyders.
My vote for a Sprint Run JESTER would be that Burgundy Micarta version. But I'm sure most of you already have your favorites picked out. But I did remember that one small Spyder better than I did any of the others I had at that time.
- JonLeBlanc
- Member
- Posts: 1756
- Joined: Sun May 13, 2018 8:00 am
- Location: Louisiana
Re: FRN Jester Sprint Input Needed
^this. Spyderco ought to bring back the Jester tout court. The forward thumb ramp with jimping is a brilliant design on a small blade.
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
Re: FRN Jester Sprint Input Needed
Just a shameless bump... Dreaming of this showing up in the next reveal in the K390 lineup!
-Nick
- dj moonbat
- Member
- Posts: 1488
- Joined: Sat Mar 27, 2010 11:58 am
- Location: Sunny SoCal
Re: FRN Jester Sprint Input Needed
I don’t have a specific steel or scale material in mind, but I strongly concur: I would just bring the Jester back, and failing that, would suggest that it’s a design worth sprinting every several years.
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: FRN Jester Sprint Input Needed
dj moonbat wrote: ↑Tue Aug 25, 2020 9:41 pmI don’t have a specific steel or scale material in mind, but I strongly concur: I would just bring the Jester back, and failing that, would suggest that it’s a design worth sprinting every several years.
Agreed! I think it is worth adding to the Salt lineup as a permanent resident. I bet blacked out PE and SE H1 Salts would do well.
I think I heard there is an exclusive in the works, but it may be 2021 or beyond. Maybe we will get lucky and see a Salt or K390 in the next reveal though! :rolleyes:
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: FRN Jester Sprint Input Needed
Yup yup.steelcity16 wrote: ↑Tue Aug 25, 2020 10:00 pmdj moonbat wrote: ↑Tue Aug 25, 2020 9:41 pmI don’t have a specific steel or scale material in mind, but I strongly concur: I would just bring the Jester back, and failing that, would suggest that it’s a design worth sprinting every several years.
Agreed! I think it is worth adding to the Salt lineup as a permanent resident. I bet blacked out PE and SE H1 Salts would do well.
I think I heard there is an exclusive in the works, but it may be 2021 or beyond. Maybe we will get lucky and see a Salt or K390 in the next reveal though! :rolleyes:
Salts n Sprints are flavors I like. K390 would be :cool: :spyder:
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: FRN Jester Sprint Input Needed
Enactive wrote: ↑Tue Aug 25, 2020 10:04 pmYup yup.steelcity16 wrote: ↑Tue Aug 25, 2020 10:00 pmdj moonbat wrote: ↑Tue Aug 25, 2020 9:41 pmI don’t have a specific steel or scale material in mind, but I strongly concur: I would just bring the Jester back, and failing that, would suggest that it’s a design worth sprinting every several years.
Agreed! I think it is worth adding to the Salt lineup as a permanent resident. I bet blacked out PE and SE H1 Salts would do well.
I think I heard there is an exclusive in the works, but it may be 2021 or beyond. Maybe we will get lucky and see a Salt or K390 in the next reveal though! :rolleyes:
Salts n Sprints are flavors I like. K390 would be :cool: :spyder:
Yep, I don't think bringing it back as a production VG-10 would drive enough demand. A blacked out Salt would be unique as a small blacked out rust-proof keychain knife in the lineup. Seems like a winner to me. I'd buy a bunch for all of our keychains.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: FRN Jester Sprint Input Needed
Great to see this thread bumped to the top. The color poll doesn't make me happy, but a steel upgrade to K390 would enable me to ignore whatever color Sal wanted to put together. I'm still ready to buy whenever can make this a reality again.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
Re: FRN Jester Sprint Input Needed
GITD LC200N SE would be fine for this goober. :)
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
-
- Member
- Posts: 500
- Joined: Wed Jun 17, 2020 11:57 am
- Location: Austria / Europe
Re: FRN Jester Sprint Input Needed
I whould love a Jester "Plus" in the size of a Dragonfly to Lil Native!
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: FRN Jester Sprint Input Needed
austrian_spyder_fan wrote: ↑Wed Aug 26, 2020 2:05 pmI whould love a Jester "Plus" in the size of a Dragonfly to Lil Native!
Did someone say Jester-fly??? :p I already have unofficial requests (via forum whining) for a Dodo-fly, Cricket-fly, Jester-fly, and Worker-fly to be added to the Dragonfly blade shape family. :D
The more people who ask for this stuff the better! Show that there is demand for these awesome blade shapes when put into the existing highly popular and refined Dragonfly handle. If they can make a blade in these shapes that will fit in the the existing handle, I don't see why they couldn't at least test the waters with something like an LC200N sprint in Toxic Green FRN. The steel and color will help drive demand and then people will fall in love with the blade shapes and drive demand for other variations.
I think that is part of the downfall of new models. Black VG-10 isn't enough of an incentive to get people to try a new model, especially at the ever increasing prices of these base models. They need to be introduced as sprints with a different steel and color to get people to buy and test these models out. Then if we are begging for more you can take it from there and add it to the lineup.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: FRN Jester Sprint Input Needed
Maybe we should stick with trying to get a rerun of the model that already exists first. That's been hard enough!
-Nick
Re: FRN Jester Sprint Input Needed
If I can post on the forum after more than 8 years, there can also be a GITD H1 SE Jester soon :D
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: FRN Jester Sprint Input Needed
They really need to add the Jester back into the lineup. A Toxic Green LC200N Salt version would sell well I would think.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
- Abyss_Fish
- Member
- Posts: 811
- Joined: Tue Apr 21, 2020 3:23 pm
- Location: Minnesota, USA.
Re: FRN Jester Sprint Input Needed
A jester in either lc200n or a coated tool steel would be a spectacular backup knife. That jimping up near the tip makes bearing down on it much easier, for all the tasks you don't want to put your 500$ custom para 3 through :D
Lightly insane.
Current spydie collection: Watu, Rhino, UKPK Salt G10 bladeswap, Yojimbo 2 Smooth G10 Cru-Wear, Manix lw “mystic” 20cv, SmallFly 2, Waterway, Ladybug k390, Caribbean
Current favorite steels: sg2/R2, lc200n/Z-FiNit, 3v
Current spydie collection: Watu, Rhino, UKPK Salt G10 bladeswap, Yojimbo 2 Smooth G10 Cru-Wear, Manix lw “mystic” 20cv, SmallFly 2, Waterway, Ladybug k390, Caribbean
Current favorite steels: sg2/R2, lc200n/Z-FiNit, 3v
Re: FRN Jester Sprint Input Needed
I don't have access to all my old catalog files. Was the Jester ever sold at the same time as the Ladybug or Manbug? Maybe they're hesitant to add it back to the line up because it's really close to those?steelcity16 wrote: ↑Tue Apr 06, 2021 10:21 amThey really need to add the Jester back into the lineup. A Toxic Green LC200N Salt version would sell well I would think.
Of all the things I've lost I miss my mind the most!
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: FRN Jester Sprint Input Needed
Sharp Guy wrote: ↑Wed Apr 07, 2021 1:43 pmI don't have access to all my old catalog files. Was the Jester ever sold at the same time as the Ladybug or Manbug? Maybe they're hesitant to add it back to the line up because it's really close to those?steelcity16 wrote: ↑Tue Apr 06, 2021 10:21 amThey really need to add the Jester back into the lineup. A Toxic Green LC200N Salt version would sell well I would think.
No idea. To me it is just a different blade shape. Like Hawkbills, Wharnies, and Sheepfoots in the Ladybugs and Manbugs. The Jester is a unique and interesting shape with the forward jimping. Not sure why they couldn't add it into the lineup as a test. Make a run of Toxic Green LC200N Salts in PE and SE and see how they sell.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: FRN Jester Sprint Input Needed
Jester was sold at the same time as Ladybugs. I believe out side of the sprint, it was not sold as a stock model at the same time as the Manbug. I might be wrong, but that is what I remember. :o
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
- araneae
- Member
- Posts: 5492
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
Re: FRN Jester Sprint Input Needed
The jester handle became the ladybug 3 handle and disappeared at that time. Way before the Manbug existed.
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
Re: FRN Jester Sprint Input Needed
Bumping this back to the top.
We need a new Jester. K390 or LC200N both seem like they would be well received. Let’s do this!
We need a new Jester. K390 or LC200N both seem like they would be well received. Let’s do this!