Heck yea!!vivi wrote: ↑Tue May 11, 2021 11:21 amIn the latest reveal not only is the Resilience coming fully serrated, but there will be satin 8Cr, black 8Cr and S35VN variants!
Who else is excited for this release?
https://catalog.spyderco.com/Reveal8/
Fully Serrated Resilience!
Re: Fully Serrated Resilience!
Re: Fully Serrated Resilience!
4.2" of cutting edge in a nicely balanced steel like S35VN for $107.10 is a heckuva deal in my book. Anxiously awaiting real world opinions on how serrated S35VN fares compared to other toothy steels.
- Doc Dan
- Member
- Posts: 14815
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Fully Serrated Resilience!
I am ambivalent about it. Just another liner lock. I am more excited about the FFG Spyderedge K390 Police. Sorry.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Fully Serrated Resilience!
No doubt the serrated K390 police will sell like gangbusters, but some degree of corrosion resistance is warranted in the environs to which I venture. Liner locks make me a little nervous because I've seen too many cheap ones fail the spine whack, but I have confidence that Spyderco will not produce an unsafe lock. I hope the S35VN version is as safe as the Military and has bronze washers.
Re: Fully Serrated Resilience!
skeeg11 wrote: ↑Thu May 13, 2021 1:51 amNo doubt the serrated K390 police will sell like gangbusters, but some degree of corrosion resistance is warranted in the environs to which I venture. Liner locks make me a little nervous because I've seen too many cheap ones fail the spine whack, but I have confidence that Spyderco will not produce an unsafe lock. I hope the S35VN version is as safe as the Military and has bronze washers.
The S35VN Tenacious linerlock is great and perfectly safe. And actually one of the most convenient to use locks I am aware of. I´d strongly assume that the Tenacious S35VN lock won´t be any different.
On a sidenote: I personally don´t think that the "spine whack test" is overly meaningful in order to determine lock strength in real, realistic knife use. But that´s just me!
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Fully Serrated Resilience!
Wartstein wrote: ↑Thu May 13, 2021 2:22 amskeeg11 wrote: ↑Thu May 13, 2021 1:51 amNo doubt the serrated K390 police will sell like gangbusters, but some degree of corrosion resistance is warranted in the environs to which I venture. Liner locks make me a little nervous because I've seen too many cheap ones fail the spine whack, but I have confidence that Spyderco will not produce an unsafe lock. I hope the S35VN version is as safe as the Military and has bronze washers.
The S35VN Tenacious linerlock is great and perfectly safe. And actually one of the most convenient to use locks I am aware of. I´d strongly assume that the Tenacious S35VN lock won´t be any different.
On a sidenote: I personally don´t think that the "spine whack test" is overly meaningful in order to determine lock strength in real, realistic knife use. But that´s just me!
I really don't understand the spine whack thing at all. It isn't a realistic task that you'd perform with any knife. Are people out camping, trying to drive a nail into a tree with the spine of their pocket knife? The only thing it proves is that a non realistic "test" can fail some locks and not fail others. The only lock I've ever had disengage and close on my hand was a traditional back lock, and part of that was because I was squeezing the handle hard enough to press on the lock.
All SE all the time since 2017
~David
~David
Re: Fully Serrated Resilience!
Sorry guys. I wasn't really referring to a hard spine whack against a hard surface but just doing against your leg while sitting down. There have been some awful unsafe gas station knives out there.
Re: Fully Serrated Resilience!
Wartstein---
Does your Tenacious have bronze washers?
Does your Tenacious have bronze washers?
Re: Fully Serrated Resilience!
i hope these blades are swappable. if so, i'll have a pe s35vn/g10 version, a se coated 8cr13mov/blue frn version, and a pe 8cr13mov/black frn version. oh man... please let them be swappable.
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Fully Serrated Resilience!
has anyone swapped blades between the different tenacious models?
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Fully Serrated Resilience!
I can't imagine there would be any difference between the blades.
Wonder when these will hit dealers? I'm excited to give the full SE a try as my EDC and see how it stacks up against the Military.
Wonder when these will hit dealers? I'm excited to give the full SE a try as my EDC and see how it stacks up against the Military.
Re: Fully Serrated Resilience!
I don't have it on me right now, but I am 100% sure it has.
Just had a quick look into Nick Shabbaz maintaining vid of the 8CR Tenacious lightweight, this one has two phosphor bronze washers on each side (see here at about 1:25 into the vid https://youtu.be/C9rngrxyxCs)
Can't imagine that the "higher end: S35VN version is any different in that regard.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Fully Serrated Resilience!
Mucho thanks Wartstein. In that case I'll probably get the PE S35VN Resilience first and wait until I hear how the teeth in S35VN hold up.
- Nick D. Fingerz
- Member
- Posts: 130
- Joined: Sat Jan 29, 2011 2:19 pm
- Location: N.E. Wisconsin
Re: Fully Serrated Resilience!
The PE S35VN Resilience is definitely on my list. I'm so impressed with the Tenacious S35VN, I'll have to get its big brother.
Re: Fully Serrated Resilience!
Fantastic news, one of my most used knives, great camping and kitchen all rounder.
Good stuff Spyderco.
Good stuff Spyderco.
Re: Fully Serrated Resilience!
has there been any hint of the s35vn models being offered in a coated version?
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Fully Serrated Resilience!
I don't think the Resilience will be fully serrated. The maker said t was too difficult for him due to its size so a 50/50 is going to be the best we can get. At least for now.
sal
sal
Re: Fully Serrated Resilience!
Oh that is a bummer. Have him talk to whoever is doing the Police 4.
All SE all the time since 2017
~David
~David
Re: Fully Serrated Resilience!
i'm looking forward to a serrated resilience, but i really want a pe s35vn resilience more because it will compliment my se caribbean. please don't delay the release of plain edge and combo edge for the full serrated version.
a s35vn resilience with black blade, liners, and hardware and blue scales would look sick. just saying.
a s35vn resilience with black blade, liners, and hardware and blue scales would look sick. just saying.
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Fully Serrated Resilience!
it is a bummer, but a combo edge on such a long blade will still give about as many teeth as a delica probably.
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C