Spyder Classics: The C-61 Pegasus

Discuss Spyderco's products and history.
JD Spydo
Member
Posts: 23547
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Spyder Classics: The C-61 Pegasus

#1

Post by JD Spydo »

I've been accused by a few of the Brethren for not giving proper, well deserved attention to many of Spyderco's small bladed models. I guess I am just a bit prejudice in a way because the Para2 model is about as small as I've worked with for the past 4 years or so. But an old girlfriend of mine from about 12 years back really loved it when I gave her a C-61 Pegasus. She really bragged a lot about that model. I gave her a full SE version of that golden oldie and I must admit that for the blade size it wasn't bad at all.

Now one of my all time favorite Short Bladed Spyders was the SPUR model which went by way of the dinosaurs I guess. Because I haven't seen one of them for sale or trade in over 7 years or more. I'm curious as to how many of you all have this golden oldie small blade? And how it compared from PE to SE. I will say that most of Spyderco's short bladed models do better than you would expect in SE.
JD Spydo
Member
Posts: 23547
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Spyder Classics: The C-61 Pegasus

#2

Post by JD Spydo »

Really!!??? Seriously!!??? no one knows about the C-61 Pegasus model :confused: . And it was in the main line and all the catalogs for quite some time in the late 90s and early 2000s. It's in the size range of the Dragonfly. There are Spyderco models that are obscure and this might be one of them. But I was sure that some of my fellow forumites were familiar with this older model :confused:
tbdoc4kids
Member
Posts: 402
Joined: Sat Sep 24, 2016 11:01 pm
Location: Mission, KS

Re: Spyder Classics: The C-61 Pegasus

#3

Post by tbdoc4kids »

Spydiewiki does say it is only rarely discussed on the forums. I have never seen one.
Rinzler
Member
Posts: 690
Joined: Sat Jan 04, 2020 11:58 am

Re: Spyder Classics: The C-61 Pegasus

#4

Post by Rinzler »

JD Spydo wrote:
Tue Mar 09, 2021 10:49 pm
Really!!??? Seriously!!??? no one knows about the C-61 Pegasus model :confused: . And it was in the main line and all the catalogs for quite some time in the late 90s and early 2000s. It's in the size range of the Dragonfly. There are Spyderco models that are obscure and this might be one of them. But I was sure that some of my fellow forumites were familiar with this older model :confused:
No pictures??? Help us out.
User avatar
ZrowsN1s
Member
Posts: 7342
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: Spyder Classics: The C-61 Pegasus

#5

Post by ZrowsN1s »

Looks like a less refined Dragonfly.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
User avatar
Reject
Member
Posts: 1819
Joined: Sat Dec 11, 2010 11:49 pm
Location: Australia. Up a Gum tree.

Re: Spyder Classics: The C-61 Pegasus

#6

Post by Reject »

Image
How much can a Koala bear?
User avatar
VWTattoo
Member
Posts: 822
Joined: Fri Sep 24, 2004 10:33 am
Location: Blandon, PA

Re: Spyder Classics: The C-61 Pegasus

#7

Post by VWTattoo »

Hi, JD, I love your chosen model discussions whenever I scroll through the forums, as they remind me of the models you and I have both coveted over the years. The Zowada, Merlin, Temperance, Lava, and Dyad just come to mind.

Anyway, with this post, you reminded me of the small Spydies in my collection, and how nice they are to carry and enjoy. One can appreciate how the design evolved from the Experimental Models 01 and 04 into the Pegasus, which is so similar to the Navigator. The obvious evolutionary path is to the Dragonfly, which smooths out the 2nd finger swell. They are 3 finger knives, but the tail makes it almost a 4 finger knife. The best part is how it allows me to place my finger along the spine to control the point. And I, for one, and still a fan of metal handles/ scales, be it SS, Almite, or Ti. They always feel more solid and substantial, and therefore more reliable. Maybe that's just me, though.

Here is a pic of some small ones from the vault for comparison and evolution discussion.

Image
Top to Bottom: Experimental CX01, Experimental CX04, Navigator 2, Dragonfly

I think the coolest part of these small knives is how each of them manages to be so small yet fill the hand somehow. Great choices for light carry days.
JD Spydo
Member
Posts: 23547
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Spyder Classics: The C-61 Pegasus

#8

Post by JD Spydo »

VWTattoo wrote:
Wed Mar 10, 2021 9:27 am
Hi, JD, I love your chosen model discussions whenever I scroll through the forums, as they remind me of the models you and I have both coveted over the years. The Zowada, Merlin, Temperance, Lava, and Dyad just come to mind.

Anyway, with this post, you reminded me of the small Spydies in my collection, and how nice they are to carry and enjoy. One can appreciate how the design evolved from the Experimental Models 01 and 04 into the Pegasus, which is so similar to the Navigator. The obvious evolutionary path is to the Dragonfly, which smooths out the 2nd finger swell. They are 3 finger knives, but the tail makes it almost a 4 finger knife. The best part is how it allows me to place my finger along the spine to control the point. And I, for one, and still a fan of metal handles/ scales, be it SS, Almite, or Ti. They always feel more solid and substantial, and therefore more reliable. Maybe that's just me, though.

Here is a pic of some small ones from the vault for comparison and evolution discussion.

Image
Top to Bottom: Experimental CX01, Experimental CX04, Navigator 2, Dragonfly

I think the coolest part of these small knives is how each of them manages to be so small yet fill the hand somehow. Great choices for light carry days.
Well thank you "VWTattoo" because I actually remember you being a big contributor on my really old ( 2005 era) thread entitled "Now's The Time: For A New Hawkbill. I truthfully believe that the SUPERHAWK model was borne out of that thread :D But I do remember you and Dodge both being there ;) It is kind of strange that the Pegasus had a relatively short tenure compared to several of the other short blade Spyderco models.

People here lately kind of shun me in many ways when I bring up the models out of what I affectionately like to refer to as "The GOLDEN ERA OF SPYDERS (1998 to 2004). It's still my favorite era by far even though there are several newer models that are on my "gotta have" list. With all the double bladed folders on the market in the past 20 years there isn't even one that comes close to the C-44 Dyad by comparison IMO. Thank you for your comments Sir :)
User avatar
Larry_Mott
Member
Posts: 2587
Joined: Tue Jul 14, 2015 5:00 am
Location: Helsingborg, Sweden

Re: Spyder Classics: The C-61 Pegasus

#9

Post by Larry_Mott »

Here's mine, posing with the CoPilot

Image
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
User avatar
Larry_Mott
Member
Posts: 2587
Joined: Tue Jul 14, 2015 5:00 am
Location: Helsingborg, Sweden

Re: Spyder Classics: The C-61 Pegasus

#10

Post by Larry_Mott »

VWTattoo wrote:
Wed Mar 10, 2021 9:27 am
Hi, JD, I love your chosen model discussions whenever I scroll through the forums, as they remind me of the models you and I have both coveted over the years. The Zowada, Merlin, Temperance, Lava, and Dyad just come to mind.

Anyway, with this post, you reminded me of the small Spydies in my collection, and how nice they are to carry and enjoy. One can appreciate how the design evolved from the Experimental Models 01 and 04 into the Pegasus, which is so similar to the Navigator. The obvious evolutionary path is to the Dragonfly, which smooths out the 2nd finger swell. They are 3 finger knives, but the tail makes it almost a 4 finger knife. The best part is how it allows me to place my finger along the spine to control the point. And I, for one, and still a fan of metal handles/ scales, be it SS, Almite, or Ti. They always feel more solid and substantial, and therefore more reliable. Maybe that's just me, though.

Here is a pic of some small ones from the vault for comparison and evolution discussion.

Image
Top to Bottom: Experimental CX01, Experimental CX04, Navigator 2, Dragonfly

I think the coolest part of these small knives is how each of them manages to be so small yet fill the hand somehow. Great choices for light carry days.
I don't see a CX04 in the pic buddy. I have one, and it was the model that later became the Calypso Jr.
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
VashHash
Member
Posts: 4839
Joined: Mon Aug 03, 2009 2:49 pm
Location: Louisiana

Re: Spyder Classics: The C-61 Pegasus

#11

Post by VashHash »

Looks more like a meerkat to me. Just without the meerkat's modified back lock and sliding scale.
User avatar
sal
Member
Posts: 17029
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Spyder Classics: The C-61 Pegasus

#12

Post by sal »

The Meerkat was a Navigator pattern.

sal
User avatar
Doc Dan
Member
Posts: 14806
Joined: Thu Nov 08, 2012 4:25 am
Location: In a dimension as vast as space and as timeless as infinity.

Re: Spyder Classics: The C-61 Pegasus

#13

Post by Doc Dan »

While the Pegasus was cool for the time, the Dragonfly is superior in every way. However, sometimes a blade of 2 inches or so is preferrable, but now we also have the Manbug, etc.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)

Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)



NRA Life Member
Spydernation 0050
User avatar
flipe8
Member
Posts: 1033
Joined: Thu Oct 20, 2005 11:32 am
Location: Saint John,New Brunswick,Canada

Re: Spyder Classics: The C-61 Pegasus

#14

Post by flipe8 »

It’s been a while since Ive logged on(about three years!), but I had a Pegasus. I really enjoyed the original “little big knives” of the past and regret selling all of them!
User avatar
Xformer
Member
Posts: 459
Joined: Wed Mar 21, 2018 4:33 pm

Re: Spyder Classics: The C-61 Pegasus

#15

Post by Xformer »

VWTattoo wrote:
Wed Mar 10, 2021 9:27 am
Hi, JD, I love your chosen model discussions whenever I scroll through the forums, as they remind me of the models you and I have both coveted over the years. The Zowada, Merlin, Temperance, Lava, and Dyad just come to mind.

Anyway, with this post, you reminded me of the small Spydies in my collection, and how nice they are to carry and enjoy. One can appreciate how the design evolved from the Experimental Models 01 and 04 into the Pegasus, which is so similar to the Navigator. The obvious evolutionary path is to the Dragonfly, which smooths out the 2nd finger swell. They are 3 finger knives, but the tail makes it almost a 4 finger knife. The best part is how it allows me to place my finger along the spine to control the point. And I, for one, and still a fan of metal handles/ scales, be it SS, Almite, or Ti. They always feel more solid and substantial, and therefore more reliable. Maybe that's just me, though.

Here is a pic of some small ones from the vault for comparison and evolution discussion.

Image
Top to Bottom: Experimental CX01, Experimental CX04, Navigator 2, Dragonfly

I think the coolest part of these small knives is how each of them manages to be so small yet fill the hand somehow. Great choices for light carry days.
The "grip area" of the Dragonfly is 9.3cm. Huge for a knife of that size. It's better than the bugout, the Rat-2 or the small Sebenza.

It's one of Sal best work. His magnum opus to me. I look at it once per day (no joke) and while I'm not a collector, that's one of those knife I need in every colors :D
Post Reply