My guess is 600-1000 based on the numbers from the Spydiwiki, maybe starting with 600 then wait on demand? I'm hoping for 2 myself but with the $50 price tag they may get gone quick. I'd love a preorder
Mule Team MT28P CPM SPY27 Revealed!
- legOFwhat?
- Member
- Posts: 3143
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: Mule Team MT28P CPM SPY27 Revealed!
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: Mule Team MT28P CPM SPY27 Revealed!
Given the price, I hope it's at least a run of 1200. New steel and a resurrection of the Mule team? I expect they'll be gone instantly.
- standy99
- Member
- Posts: 2216
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: Mule Team MT28P CPM SPY27 Revealed!
I have scales sitting knifeless. Poor things.........
Im a vegetarian as technically cows are made of grass and water.
Re: Mule Team MT28P CPM SPY27 Revealed!
I'm dying to get my hands on this one. I've been practicing my scales and just finished my first set of TeroTuf mule scales.
- legOFwhat?
- Member
- Posts: 3143
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: Mule Team MT28P CPM SPY27 Revealed!
Today is show and tell Tom, show us! :p
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
- standy99
- Member
- Posts: 2216
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: Mule Team MT28P CPM SPY27 Revealed!
Where o where is the Mule :mad:
Im a vegetarian as technically cows are made of grass and water.
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: Mule Team MT28P CPM SPY27 Revealed!
Nothing is worse than a mule that isn't there when you go looking for it.
Re: Mule Team MT28P CPM SPY27 Revealed!
Agreed. I have plans after all....
Re: Mule Team MT28P CPM SPY27 Revealed!
Don't worry about the Mule being blind, just load the wagon!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Mule Team MT28P CPM SPY27 Revealed!
I haven't been on this forum for a while, and I saw this thread and it immediately sent shivers of joy throughout my body. Lol
I can't wait to get my hands on the new Mules. :D
I can't wait to get my hands on the new Mules. :D
- standy99
- Member
- Posts: 2216
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: Mule Team MT28P CPM SPY27 Revealed!
Had to take scales off a PD1 to test these
Im a vegetarian as technically cows are made of grass and water.
Re: Mule Team MT28P CPM SPY27 Revealed!
I hate getting this notification...
Such a letdown, everytime!
Such a letdown, everytime!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Mule Team MT28P CPM SPY27 Revealed!
I have been waiting patiently for Spy27 and CPM45 as I have some friends in the hunting industry who want me to make up something stainless. I hope one of the two is available soon so I have time to get things handled before the holidays.
Re: Mule Team MT28P CPM SPY27 Revealed!
Well there is obviously a problem with MT28P. It would be nice to know what's causing the delay....
G27
G27
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: Mule Team MT28P CPM SPY27 Revealed!
I watch this thread closely with anticipation for the SPY27 mule.
I don't know anything, but am happy to speculate. I view the mules as "gifts" from Spyderco to the knife community. As I understand it they are done "at cost" more or less. So I figure that they are just waiting for some slack time in their production schedule to knock them out -- but they are just busy with money making projects. Someone said in another thread that it takes well over a year to get an exclusive run scheduled, so that tells you how busy they are.
I'll be grateful when they do show up. Beggars can't be choosers and all that.
I don't know anything, but am happy to speculate. I view the mules as "gifts" from Spyderco to the knife community. As I understand it they are done "at cost" more or less. So I figure that they are just waiting for some slack time in their production schedule to knock them out -- but they are just busy with money making projects. Someone said in another thread that it takes well over a year to get an exclusive run scheduled, so that tells you how busy they are.
I'll be grateful when they do show up. Beggars can't be choosers and all that.
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Mule Team MT28P CPM SPY27 Revealed!
Of course these are delayed. We are in the middle of pandemic that has caused much trouble around the world. Projects like these are not big money makers and it is better that Spyderco has focused on things that keep their employees employed, the doors open, and the lights on.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Mule Team MT28P CPM SPY27 Revealed!
Well said ... +1JRinFL wrote: ↑Tue Dec 08, 2020 9:55 amOf course these are delayed. We are in the middle of pandemic that has caused much trouble around the world. Projects like these are not big money makers and it is better that Spyderco has focused on things that keep their employees employed, the doors open, and the lights on.
CG
So many knives - so little funds!!!
Re: Mule Team MT28P CPM SPY27 Revealed!
You have no idea if it's pandemic related or not. Most, if not, every other Blade in the same Reveal has been released. It "could" also be heat treat or grinding issues or steel QC or....
G27
G27