I'd be in for Para 2 salt with yellow scales.JRinFL wrote: ↑Thu Aug 27, 2020 10:31 amThere is a push for a Salt Para 2, and I would imagine Eric and Sal have few more up their collective sleeves as well. With limited production capacity, I would not want it all to go to more expensive Salt models is my point, I guess. I'm not a opposed to new Salt models. :)
Demand and Supply of New Salt Series Knives?
Re: Demand and Supply of New Salt Series Knives?
- VooDooChild
- Member
- Posts: 2627
- Joined: Wed Feb 21, 2018 1:29 am
Re: Demand and Supply of New Salt Series Knives?
Im a huge fan of the salt series. But I do believe that a lot of people dont need the extreme corrosion resistance the salt series offers. Theres a lot of good stainless that will support most peoples knife needs just fine.
However, I am always for more salt models.
However, I am always for more salt models.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: Demand and Supply of New Salt Series Knives?
Hopefully this is true for the next Para 3 LW releaseladybug93 wrote: ↑Thu Aug 27, 2020 12:07 pmi'm guessing the next new salt will be a para 3 lw salt in lc200n. we'll probably see a pm2 lw that eventually turns into a salt as well. personally, i'd love to see more lined g10 salts like the caribbean, but i'm sure it's more cost effective to use less lc200n like the para 3 lw will.
I think knife reviewers on youtube (can't remember who, always watching a lot of knife review videos) have expressed the desire to have a Para 3 LW Salt as soon as the base BD1N model came out.
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet
Re: Demand and Supply of New Salt Series Knives?
An LC200N Street Beat is the stuff dreams are made of.
I really, really, really, REALLY, want a solid LC200N Micro Dyad! I would beat the living snot out of it!
Basically, put LC200N on any knife and it would make it better. >:]
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
- bearfacedkiller
- Member
- Posts: 11420
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Demand and Supply of New Salt Series Knives?
I see the salt knives as purpose built for use around salt water. I appreciate low maintenance as much as the next guy but I dont need zero maintenance. I find most stainless steels easy enough to maintain and would prefer a steel with some more abrasion resistance and I am willing to give up some corrosion resistance for that added edge holding. I regularly neglect S110V and often put it back in my pocket wet yet it has never corroded on me. I have had some corrosion with S30V but VG10, XHP and M390 have all been trouble free.
So for me I don’t understand the desire to “Salt” every knife. There are plenty of highly stainless steels that will require little maintenance unless around salt water and that will also hold an edge much longer than LC200N. They can certainly all handle light food prep and a rinse in the sink.
Of course we all live different lives and this is just my observation from my angle.
So for me I don’t understand the desire to “Salt” every knife. There are plenty of highly stainless steels that will require little maintenance unless around salt water and that will also hold an edge much longer than LC200N. They can certainly all handle light food prep and a rinse in the sink.
Of course we all live different lives and this is just my observation from my angle.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Demand and Supply of New Salt Series Knives?
Hi Robis,
Welcome to our forum.
In my opinion, dishwashers are not good for blades because of the heat and the dishwasher soap.
sal
Welcome to our forum.
In my opinion, dishwashers are not good for blades because of the heat and the dishwasher soap.
sal
- steelcity16
- Member
- Posts: 5356
- Joined: Mon Dec 11, 2017 11:34 am
Re: Demand and Supply of New Salt Series Knives?
This is something that would be cool for Larrin to test. If he could run some blades of H1, LC200N, and other steels through some hot (highest setting) dishwasher cycles with powder detergent, make sure they are spaced out to where they aren't banging into other things (one of the main arguments as to why you shouldn't dishwash knives is they bang into other utensils), and then look at the edges under the microscope to see if they degrade and how much just by the action of hot water jets and detergents.
I have German made Henckels and Wusthof knives and dishwash them daily or sometimes two or three times daily. I steel them before every use with the below steel, and haven't had to do any actual sharpening in years, so I question all of the claims out there about dishwashers being bad for blade edges as long as they are placed carefully in the dishwasher where they won't bang into other stuff. I do agree that it isn't great for some handle materials, but my Henckels Twin Four Star handles take the daily washings in stride with no issues to speak of after many years.
My F Dick Sharpening Steel. I wish there was a little tiny fold up pocket version of this for steeling my Spydies.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
-
- Member
- Posts: 92
- Joined: Fri Sep 24, 2004 10:33 am
Re: Demand and Supply of New Salt Series Knives?
What ? I gut a bunch of deer each year with an Old Timer Stockman ,a few day later I rinse it under the faucet with hot water and wipe it off on my leg . Def works....Mugman16 wrote: ↑Thu Aug 27, 2020 10:28 amyeah but i mean all up in the guts too, like inside the locking mechanism and pivot. def shouldnt be cleaning that out with water and soap, you should probably use isopropyl alcohol for that. the premium on salt knives does exist but there are def economical models like the native 5 salt (which has terrible action but is great in every other facet).