Dragonfly black hardware?
Dragonfly black hardware?
Was there ever a dragonfly with black hardware?
I have a really great ZDP 189 dragonfly and think it would look nice with black hardware...
I have a really great ZDP 189 dragonfly and think it would look nice with black hardware...
- GiftedMisfit
- Member
- Posts: 1079
- Joined: Thu Dec 06, 2018 10:20 am
- Location: Ontario, Canada. Earth
Re: Dragonfly black hardware?
I've had this bad boy since October/November, can't remember. Yeah it comes with black hardware (except clip). Absolutely love this model, would be lost without it.
ladybug93 wrote: And now I'm wondering how a translator will render "butt hurt"
- RadioactiveSpyder
- Member
- Posts: 4539
- Joined: Sat Mar 30, 2013 9:48 pm
- Location: Lost in space
Re: Dragonfly black hardware?
It's better to be good than evil, but one achieves goodness at a terrific cost. ––– Stephen King
- GiftedMisfit
- Member
- Posts: 1079
- Joined: Thu Dec 06, 2018 10:20 am
- Location: Ontario, Canada. Earth
Re: Dragonfly black hardware?
The bill boarding on the backside of that black blade kind of kills it.
ladybug93 wrote: And now I'm wondering how a translator will render "butt hurt"
Re: Dragonfly black hardware?
everyone wants a blacked out df2 salt. not sure why it doesn’t exist yet.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Dragonfly black hardware?
nevermind. i’m just going to get a black lil native instead.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
- RadioactiveSpyder
- Member
- Posts: 4539
- Joined: Sat Mar 30, 2013 9:48 pm
- Location: Lost in space
Re: Dragonfly black hardware?
Doesn’t bug me at all, especially given how ridiculously limited these were...GiftedMisfit wrote: ↑Thu Mar 26, 2020 10:54 pmThe bill boarding on the backside of that black blade kind of kills it.
It's better to be good than evil, but one achieves goodness at a terrific cost. ––– Stephen King
Re: Dragonfly black hardware?
GiftedMisfit wrote: ↑Thu Mar 26, 2020 10:23 pm
I've had this bad boy since October/November, can't remember. Yeah it comes with black hardware (except clip). Absolutely love this model, would be lost without it.
It came that way? Needs a black blade to go with it. Like the new Pacific Salt, I like the black hardware, only if the blade's black too.
________________________________________________________________________________________________________
That is gorgeous. I think black, yellow, and blue should come from the factory with a black hardware choice.
- best wishes, Jazz.
- GiftedMisfit
- Member
- Posts: 1079
- Joined: Thu Dec 06, 2018 10:20 am
- Location: Ontario, Canada. Earth
Re: Dragonfly black hardware?
Yeah it came that way, has Sal's signature too, unlike previous iterations.
As far as the bill boarding goes, the limited nature doesn't change the big *** letters on the side. They're ugly to me personally. Not for everyone though.
As far as the bill boarding goes, the limited nature doesn't change the big *** letters on the side. They're ugly to me personally. Not for everyone though.
ladybug93 wrote: And now I'm wondering how a translator will render "butt hurt"
Re: Dragonfly black hardware?
Now I'm curious about that :billboard "
Re: Dragonfly black hardware?
Ruins it for me. Such a great color combo and then you put a bumper sticker on it. Right out of the box I'd have taken a sharpie to it. I'm holding out hope the color combo will come back in a Delica or Para 3 LW.
Re: Dragonfly black hardware?
Agreed. It's a beautiful knife with an unaesthetic "bumper sticker" on it. I suspect if nuttin fancy had his way, there would have been 12,000 words stuck on it instead... :D
Re: Dragonfly black hardware?
Dropping a link here to a related thread (obviously, self interest :-) involved )...Sal in post 2 said they'd keep an eye on the thread to gauge interest in a blacked out version. I saw a blacked out Para 3 LW the other day, and it made me think of this. If you're interested, please chime in!
viewtopic.php?f=2&t=85962&hilit=one+step+closer
viewtopic.php?f=2&t=85962&hilit=one+step+closer
Re: Dragonfly black hardware?
Did you ever end up putting that black wire clip on this one to match the hardware?GiftedMisfit wrote: ↑Fri Mar 27, 2020 7:54 amYeah it came that way, has Sal's signature too, unlike previous iterations.
As far as the bill boarding goes, the limited nature doesn't change the big *** letters on the side. They're ugly to me personally. Not for everyone though.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: Dragonfly black hardware?
Do you know which model's black wire clip fits?TkoK83Spy wrote: ↑Fri Mar 27, 2020 5:38 pmDid you ever end up putting that black wire clip on this one to match the hardware?GiftedMisfit wrote: ↑Fri Mar 27, 2020 7:54 amYeah it came that way, has Sal's signature too, unlike previous iterations.
As far as the bill boarding goes, the limited nature doesn't change the big *** letters on the side. They're ugly to me personally. Not for everyone though.