Rivers Edge Cutlery Mystery Exclusive (DLC 10V/Coyote Brown G10 Paramilitary 2)
-
- Member
- Posts: 213
- Joined: Sat Dec 30, 2017 11:41 pm
Re: Rivers Edge Cutlery Mystery Exclusive
Cold steel has a scorpion lock.
Re: Rivers Edge Cutlery Mystery Exclusive
St. Nick's does the 4V exclusives recently. But I agree...I'd love a 4v manix.
- Julia
"Be excellent to each other." - Bill S. Preston, Esq.
"Be excellent to each other." - Bill S. Preston, Esq.
Re: Rivers Edge Cutlery Mystery Exclusive
Looks like 10V is now confirmed. They posted another update to their story after passing 10K followers. Here's their screen shot of the milestone, except they edited the followers number from "10K" to "10V."
So it's at least a 10V PM2 based on the hints we've got so far. Now the big mystery is the reference to the scorpion. :confused:
REC also said in a comment "The 'REC' colors are reserved for the 204P. That's coming... eventually"
So, its not going to be the typical REC colors, flat dark earth blade and olive drab.
I was probably being a little ambitious guessing its going to be an Emerson Waved PM2. :D Maybe it will just be a single tone, flat dark earth PVD coated blade and flat dark earth G10 scales?
So it's at least a 10V PM2 based on the hints we've got so far. Now the big mystery is the reference to the scorpion. :confused:
REC also said in a comment "The 'REC' colors are reserved for the 204P. That's coming... eventually"
So, its not going to be the typical REC colors, flat dark earth blade and olive drab.
I was probably being a little ambitious guessing its going to be an Emerson Waved PM2. :D Maybe it will just be a single tone, flat dark earth PVD coated blade and flat dark earth G10 scales?
-Nick
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Rivers Edge Cutlery Mystery Exclusive
10V Para2? I hope they ordered a lot!
Part of me hopes that it is an Emerson opener or hawkbill or something else I have no interest in. If it is a normal Para2 in 10V it will be hard to resist. I do have one in K390 so I guess I don’t “need” it.
Part of me hopes that it is an Emerson opener or hawkbill or something else I have no interest in. If it is a normal Para2 in 10V it will be hard to resist. I do have one in K390 so I guess I don’t “need” it.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- Doc Dan
- Member
- Posts: 14811
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Rivers Edge Cutlery Mystery Exclusive
Count the V’s. It is 10v
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Rivers Edge Cutlery Mystery Exclusive
I guess its a good thing that I am slowly but surely drifting away from ultra high carbide steel...and right now I dont feel like I want to get ripped off on paying additional taxes to my country...
In the pocket: Chaparral FRN, Native Chief, Police 4 K390, Pacific Salt SE, Manix 2 G10 REX45
- Stuart Ackerman
- Member
- Posts: 2081
- Joined: Tue Dec 07, 2004 2:39 pm
- Location: New Zealand
- Contact:
Re: Rivers Edge Cutlery Mystery Exclusive
When exposed to ultra violet light, scorpions glow in the dark... :)
Re: Rivers Edge Cutlery Mystery Exclusive
10v PM2 vith GITD vcales. Vill sell out in less than 10 vinutes. Unless they have more than 1200vcs.. nah, vill sell out super vast anyvay....
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Rivers Edge Cutlery Mystery Exclusive
And I remember it took forever for the k2 which was $150 for 4.5" of 10v to sell out at closeout
-
- Member
- Posts: 269
- Joined: Sat Jun 15, 2013 9:37 am
Re: Rivers Edge Cutlery Mystery Exclusive
I'm out. Good luck to all!
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: Rivers Edge Cutlery Mystery Exclusive
Phew! Easy pass for me. Too similar to the already released configuration with S35VN. The wallet wins again.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- legOFwhat?
- Member
- Posts: 3140
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: Rivers Edge Cutlery Mystery Exclusive
:D
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Rivers Edge Cutlery Mystery Exclusive
Blacked out knives with colored handles looks good and 10V is great stuff. These will sell quickly. I think REC will do well with this one.
That said, I do not personally like coated blades and I already have the K390 version. On top of that I very much prefer green over brown. Gonna pass myself. I have other thing competing for my funds lately
That said, I do not personally like coated blades and I already have the K390 version. On top of that I very much prefer green over brown. Gonna pass myself. I have other thing competing for my funds lately
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Rivers Edge Cutlery Mystery Exclusive
This would have been so nice with those scales and a flat dark earth color PVD coated blade!
-Nick
Re: Rivers Edge Cutlery Mystery Exclusive
Could someone tell me how this works. I don't think I purchased from REC before.
The video mentiones that the pre-sale starts today. What am I to expect?
Thanks.
The video mentiones that the pre-sale starts today. What am I to expect?
Thanks.
Peter
Re: Rivers Edge Cutlery Mystery Exclusive
It's up and available.
Re: Rivers Edge Cutlery Mystery Exclusive
+1 I would have bought one in almost any other configuration.
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
- bbturbodad
- Member
- Posts: 1180
- Joined: Sun Mar 24, 2019 9:18 am
Re: Rivers Edge Cutlery Mystery Exclusive
I don't see that anyone posted yet, but it's up on the site.
-Turbo