Carbon Steel Temperance 2?
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Carbon Steel Temperance 2?
I'd kill for this. Love the leaf blade. Love the palm swell. Love Micarta. Tool steel? Be still my beating heart.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: Carbon Steel Temperance 2?
52100 would be pretty interesting.
It wouldn't be my first choice personally, but I bet Cruwear would be a home run for sales.
It wouldn't be my first choice personally, but I bet Cruwear would be a home run for sales.
- legOFwhat?
- Member
- Posts: 3143
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: Carbon Steel Temperance 2?
I'd be on board for a Sprint in both of these steels! Haven't experienced K390 yet, so that would probably be my 1st choice but love hap40.
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: Carbon Steel Temperance 2?
I'd kill for a Tatanka sized folding version.
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Carbon Steel Temperance 2?
I have now had a Temp2 for quite a while and it is brilliant. I use it as a camp knife and general purpose outdoor knife. Works well and I have zero complaints with the VG10.
That said, I would welcome one in a different variation unless it has frn scales. I like them on a folder but have strongly disliked them on my schempp rock.
I would prefer something tough which VG10 has proven to be. I have tried quite hard to destroy my schempp rock including using it as a throwing knife for a summer. It and my Temp2 have batonned quite a bit without issue.
Maybe 3V or Cruwear? Denim micarta? :)
That said, I would welcome one in a different variation unless it has frn scales. I like them on a folder but have strongly disliked them on my schempp rock.
I would prefer something tough which VG10 has proven to be. I have tried quite hard to destroy my schempp rock including using it as a throwing knife for a summer. It and my Temp2 have batonned quite a bit without issue.
Maybe 3V or Cruwear? Denim micarta? :)
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Carbon Steel Temperance 2?
I use my Temp 2 outside quite a bit. It works well. Eric has been talking about making a Temp 2 in Golden. Same scales, What steel?
sal
sal
Re: Carbon Steel Temperance 2?
Something with lower amount of carbides - maybe 52100? CPM 3V? A2? Cru-Wear, or PD1 is also welcome.
In the pocket: Chaparral FRN, Native Chief, Police 4 K390, Pacific Salt SE, Manix 2 G10 REX45
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Carbon Steel Temperance 2?
Golden? I would like that even better! K390. Please, K390 with green canvas micarta scales.
I'd also be happy with CPM 3V/4V, or Cruwear, I haven't tried that yet. Would still love the green canvas micarta scales. :-)
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
-
- Member
- Posts: 156
- Joined: Tue Aug 09, 2016 5:47 pm
Re: Carbon Steel Temperance 2?
4v would be magnificent.
Re: Carbon Steel Temperance 2?
Me and five more ...
Marius
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation![spyderco bug 3 :bug-white-red](./images/smilies/bug-white-red.png)
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
![spyderco bug 3 :bug-white-red](./images/smilies/bug-white-red.png)
- captnvegtble
- Member
- Posts: 1058
- Joined: Tue Oct 06, 2009 10:20 am
-
- Member
- Posts: 2618
- Joined: Tue Jul 10, 2018 6:31 pm
Re: Carbon Steel Temperance 2?
Future in question?
What future?
Heck I thought Spyderco already discontinued the model.
I have not been able to find one for a reasonable price on the primary market for over 2 years now. Even when I do find one they want high 2 to $300.00 for it.
Sorry do not feel like getting stabbed for that much money on a knife that retailed for around $165.00
Sal you have a good model with the Temperence 2 I think the thing that slowed sales was using VG-10.
I skipped it when it was available because it was in VG-10, which was before I knew how good VG-10 really is and made the mistake of listening to people at the time putting VG-10 Down.
Today If I could find one of these for a reasonable price which I would consider between $175.00 and $200.00 I would buy it without batting an eye.
Now on the wish fulfillment side of things peeking into steel fantasy land..... How about Cast440C as a steel for this model, I think it would be a great steel for this model.
If it was in Cruwear well Katrie Bar th’ Door the retailers better order extra stock!
Re: Carbon Steel Temperance 2?
What really has cast 440C apart from being really hipster steel?Doeswhateveraspidercan wrote: ↑Sun Mar 01, 2020 12:14 pm.... How about Cast440C as a steel for this model, I think it would be a great steel for this model.
If it was in Cruwear well Katrie Bar th’ Door the retailers better order extra stock!
But I agree with Cru-Wear, put that name on any knife and if will sell like hot cakes ( or pancakes?).
In the pocket: Chaparral FRN, Native Chief, Police 4 K390, Pacific Salt SE, Manix 2 G10 REX45
-
- Member
- Posts: 2618
- Joined: Tue Jul 10, 2018 6:31 pm
Re: Carbon Steel Temperance 2?
Cast is supposed to be more toothy, as far as steel goes I had no idea anyone would consider 440C a hipster steel whatever that is supposed to mean.
I have a custom Buck Folder in non cast 440C and that is a very nice steel it has allot in common with Cruwear with the way it sharpens and holds a truly sharp edge, ease of sharpening and superior corrosion resistance.
Spyderco made a cast 440C steel fixed blade don’t recall the name of it but due to thickness behind the edge I did not buy it, reports of its favorable qualities and the use of 440C with my Buck Folder has led to the desire to try some cast 440C and the temperance 2 is a model I like.
I have a custom Buck Folder in non cast 440C and that is a very nice steel it has allot in common with Cruwear with the way it sharpens and holds a truly sharp edge, ease of sharpening and superior corrosion resistance.
Spyderco made a cast 440C steel fixed blade don’t recall the name of it but due to thickness behind the edge I did not buy it, reports of its favorable qualities and the use of 440C with my Buck Folder has led to the desire to try some cast 440C and the temperance 2 is a model I like.
Re: Carbon Steel Temperance 2?
Hi Does Whatever,
We believe that the reason for slower sales of the Temperance 2 was partially that is was a fixed blade, which we're not know for and partially for the high cost for a fixed blade. The handles were made in the US and shipped to Japan which again added to cost. Eric felt that we could probably do better making the knife in the Golden plant. I think the Temperance 2 would do better made in the US, but it would still be a higher cost than most of the Fixed blades available. I think my choices for a steel made in the US would be: CPM-Cruwear or CPM-Spy27. The argument being an "all around" good working steel for most outdoor activities.
sal
We believe that the reason for slower sales of the Temperance 2 was partially that is was a fixed blade, which we're not know for and partially for the high cost for a fixed blade. The handles were made in the US and shipped to Japan which again added to cost. Eric felt that we could probably do better making the knife in the Golden plant. I think the Temperance 2 would do better made in the US, but it would still be a higher cost than most of the Fixed blades available. I think my choices for a steel made in the US would be: CPM-Cruwear or CPM-Spy27. The argument being an "all around" good working steel for most outdoor activities.
sal
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Carbon Steel Temperance 2?
Cruwear it is! :Dsal wrote: ↑Sun Mar 01, 2020 1:37 pmHi Does Whatever,
We believe that the reason for slower sales of the Temperance 2 was partially that is was a fixed blade, which we're not know for and partially for the high cost for a fixed blade. The handles were made in the US and shipped to Japan which again added to cost. Eric felt that we could probably do better making the knife in the Golden plant. I think the Temperance 2 would do better made in the US, but it would still be a higher cost than most of the Fixed blades available. I think my choices for a steel made in the US would be: CPM-Cruwear or CPM-Spy27. The argument being an "all around" good working steel for most outdoor activities.
sal
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
-
- Member
- Posts: 2618
- Joined: Tue Jul 10, 2018 6:31 pm
Re: Carbon Steel Temperance 2?
Thanks Sal Wow I agree and am very pleased by your choices in steel can’t wait to get some SPY27.sal wrote: ↑Sun Mar 01, 2020 1:37 pmHi Does Whatever,
We believe that the reason for slower sales of the Temperance 2 was partially that is was a fixed blade, which we're not know for and partially for the high cost for a fixed blade. The handles were made in the US and shipped to Japan which again added to cost. Eric felt that we could probably do better making the knife in the Golden plant. I think the Temperance 2 would do better made in the US, but it would still be a higher cost than most of the Fixed blades available. I think my choices for a steel made in the US would be: CPM-Cruwear or CPM-Spy27. The argument being an "all around" good working steel for most outdoor activities.
sal
For the right steel price follows. I just spent $217.00 for the privilege of experiencing Maxamet in a PM 2 which I already own 5 different versions of and loved it so much I purchased a Native in the same steel.
Temperance2 in either of those steels and a price tag of let’s say $250.00 and you can count me in.
Glad to see Spyderco is bringing more things to production in the U.S. SPY27 being a Suped up VG-10 will help us all in numerous ways.
-
- Member
- Posts: 213
- Joined: Sat Dec 30, 2017 11:41 pm
Re: Carbon Steel Temperance 2?
Any time I spend more than $100 on a fixed blade I always end up selling it. I always become afraid and end up babying it. I like a cheaper, well made fixed blade (my fave is the Terava Jaakaripuukko) that I can wail on and not have to stress too much about breaking it.
Re: Carbon Steel Temperance 2?
I voted "yes."
As for a carbon steel fixed blade, I prefer toughness and ease-of-sharpening over edge retention. I'm partial to simple steels like O1, A2, and 52100.
As for a carbon steel fixed blade, I prefer toughness and ease-of-sharpening over edge retention. I'm partial to simple steels like O1, A2, and 52100.
-
- Member
- Posts: 112
- Joined: Fri Apr 14, 2017 10:26 am
Re: Carbon Steel Temperance 2?
I think this is a stellar idea, especially if that beautiful leather sheath makes a return. Cruwear or rex45 would be my first choices.