Caly 3/3.5 interest Poll
Re: Caly 3/3.5 interest Poll
True. Not sure why I thought it was coming out of Taichung. So Seki it is. I don’t mind vg10 but feel it deserves something a little higher on the steel ladder.
Re: Caly 3/3.5 interest Poll
Moki*
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Caly 3/3.5 interest Poll
I'm definitely in. The Caly is a classic design. Polished micarta, black or ivory, reminds me of the original Calypso, which is a great throwback.
My preference would be an ivory 3.5 in LC200N or K390.
My preference would be an ivory 3.5 in LC200N or K390.
Last edited by mayong on Tue Dec 10, 2019 9:43 pm, edited 1 time in total.
Police | Calypso | Caly 3 & 3.5 | PM 2 | Para 3 | UKPK | Endura | Dragonfly | Sage 2 | Sage 5
"While this test doesn't simulate any logical use of a knife as a tool, since it was a concern of some of our customers, we began incorporating it into our testing protocols." - Michael Janich
"While this test doesn't simulate any logical use of a knife as a tool, since it was a concern of some of our customers, we began incorporating it into our testing protocols." - Michael Janich
Re: Caly 3/3.5 interest Poll
I would gladly take the Caly 3 in XHP.
Re: Caly 3/3.5 interest Poll
I am interested in the 3" more, but what the heck.
If I may just ask, please lighten up on the back end, it's overly heavy back there.
If I may just ask, please lighten up on the back end, it's overly heavy back there.
SCARAMOUCHE!
Re: Caly 3/3.5 interest Poll
Caly 3
burgundy micarta
SS bolsters
satin XHP blade sounds good
I have a Caly 3 CF that I have carried almost daily for around 5 years ! Love that knife.... would love another sprint of it.
IMHO the Caly 3 has nicer proportions than the 3.5 sibling
burgundy micarta
SS bolsters
satin XHP blade sounds good
I have a Caly 3 CF that I have carried almost daily for around 5 years ! Love that knife.... would love another sprint of it.
IMHO the Caly 3 has nicer proportions than the 3.5 sibling
Re: Caly 3/3.5 interest Poll
Yes please. Would buy any and all caly 3.5.
Would probably go for another caly 3 as well.
Would probably go for another caly 3 as well.
- toocool006
- Member
- Posts: 372
- Joined: Mon Nov 06, 2017 4:42 pm
- Location: New Orleans
Re: Caly 3/3.5 interest Poll
I'm in for any and all Caly 3 coming down the pipe - one crazy idea I would love to see is a salt caly 3 frn :-)
~andrew
- thewoodpecker
- Member
- Posts: 495
- Joined: Thu Jan 19, 2017 1:58 pm
Re: Caly 3/3.5 interest Poll
Caly 3.5 in any flavor of smooth matte finished Micarta
i.e.
and SG2 or one of the HAP steels.
i.e.
and SG2 or one of the HAP steels.
Spyderco Caly 3.5 Super Blue user, Astute enthusiast, and geometry advocate.
-
- Member
- Posts: 475
- Joined: Tue Mar 13, 2018 4:18 pm
Re: Caly 3/3.5 interest Poll
Caly definitely on my radar. Lightweight or sprint, which ever drops first. The current zdp caly 3.5 almost got me to bite, but I'm not a fan of flat(as in not contoured), shiny carbon fiber, or the laminated blade.
- JacksonKnives
- Member
- Posts: 837
- Joined: Thu Jan 10, 2008 8:28 pm
- Location: Alberta, Canada
- Contact:
Re: Caly 3/3.5 interest Poll
XHP is the only benefit of going to Taichung, IMO, and it's a marginal benefit. Moki does an excellent job with F&F on these tricked-out lockbacks, and I don't think capacity/cost is any lower in Taiwan for this kind of project right now. (Moki has been making them for a long time.)
SG2 steel is on my radar after Larrin's recent writeup, but if VG10 has the best supply/predictability for the maker then that's still a good choice IMO. (I currently carry either a Super Blue or VG-10 Caly 3.5 every few weeks.)
Cobalt special is another Takefu stainless that we don't see a lot of.
I like bolsters. Nickel silver would be a nice look we don't see a lot of. Steel bolsters are also fine by me.
SG2 steel is on my radar after Larrin's recent writeup, but if VG10 has the best supply/predictability for the maker then that's still a good choice IMO. (I currently carry either a Super Blue or VG-10 Caly 3.5 every few weeks.)
Cobalt special is another Takefu stainless that we don't see a lot of.
I like bolsters. Nickel silver would be a nice look we don't see a lot of. Steel bolsters are also fine by me.
- JacksonKnives
- Member
- Posts: 837
- Joined: Thu Jan 10, 2008 8:28 pm
- Location: Alberta, Canada
- Contact:
-
- Member
- Posts: 112
- Joined: Fri Apr 14, 2017 10:26 am
Re: Caly 3/3.5 interest Poll
Burnt orange and hap40 for me. In either the 3 or 3.5
- thewoodpecker
- Member
- Posts: 495
- Joined: Thu Jan 19, 2017 1:58 pm
Re: Caly 3/3.5 interest Poll
Based on the 3" with Hap40 I'd guess if we see something like this it would be a 3.5 with Green and Hap40 laminate.
Spyderco Caly 3.5 Super Blue user, Astute enthusiast, and geometry advocate.
Re: Caly 3/3.5 interest Poll
I am 100% on board for this. Really I’m on board for any new caly 3 or 3.5. Love these knives. What about K390 out of seki now that we are seeing it in the Delica line up?
- Cambertree
- Member
- Posts: 1640
- Joined: Tue Sep 09, 2014 6:48 am
- Location: Victoria, Australia
Re: Caly 3/3.5 interest Poll
I really like my Caly 3.5 in laminated ZDP189, and would be up for a sprint run.
My suggestion would be to contour those squared off handle edges.
Micarta sounds good.
Sorry, I’m not into the idea of bolsters on the Caly. I assume by ‘nickel’ you mean ‘nickel silver’? That’s actually brass. I really don’t like the way that brass can develop that horrible green verdigris over time, so I avoid it.
CTS-XHP doesn’t really offer anything for me that ZDP189 doesn’t do better.
If the model was made in Seki by Moki, that might limit the bladesteel options.
Like Panchango said, we never got a Caly 3.5 in HAP40.
My suggestion would be to contour those squared off handle edges.
Micarta sounds good.
Sorry, I’m not into the idea of bolsters on the Caly. I assume by ‘nickel’ you mean ‘nickel silver’? That’s actually brass. I really don’t like the way that brass can develop that horrible green verdigris over time, so I avoid it.
CTS-XHP doesn’t really offer anything for me that ZDP189 doesn’t do better.
If the model was made in Seki by Moki, that might limit the bladesteel options.
Like Panchango said, we never got a Caly 3.5 in HAP40.
- Cambertree
- Member
- Posts: 1640
- Joined: Tue Sep 09, 2014 6:48 am
- Location: Victoria, Australia
Re: Caly 3/3.5 interest Poll
Sal’s previously mentioned that SRS13 is available to them in Japan.
HAP5R, which is similar to Cruwear would also be interesting - maybe in monometal blades, if it’s available?
Whatever the steel though, Moki would have to go for it.
Steel bolsters I might consider. I’m curious if anyone who has a steel bolstered Caly can comment on how it affects the balance point and heft of the knife, compared to a non bolstered model?
One thing to consider with bolsters is they might necessitate a peened pivot pin. I prefer the adjustable pivot screw setup myself, even if the rest of the knife is pinned.
HAP5R, which is similar to Cruwear would also be interesting - maybe in monometal blades, if it’s available?
Whatever the steel though, Moki would have to go for it.
Steel bolsters I might consider. I’m curious if anyone who has a steel bolstered Caly can comment on how it affects the balance point and heft of the knife, compared to a non bolstered model?
One thing to consider with bolsters is they might necessitate a peened pivot pin. I prefer the adjustable pivot screw setup myself, even if the rest of the knife is pinned.