Shaman Cru-Wear Sprint Run release ?

[SpyderPhreak]

THESE ARE GONE, AND WE HAVE NO MORE COMING IN. WE APOLOGIZE FOR ALL WHO DID NOT GET ONE.

--riversedgecutlery

I guess all that is left is bladeHQ and Knifecenter?

lol. This whole thing is just pathetic.

[Hank Scorpio]

Maybe this a bad time, but what do you guys think of a green Micarta Cruwear Shaman, or maybe a green Micarta with another exotic steel? I could argue for a larger quantity.

sal

Sal, I’m just adding to the din at this point, but I’d say after all this uproar, Spyderco is looking at plenty of additional margin ripe for the taking.

Like they say, scratch where it itches. When a sprint is selling out in minutes or even seconds, that’s a big itch.

Just my 0.02, but I’d wager another ~1200 piece Crucarta sprint (denim? probably doesn’t matter too much) AND a ~2400 piece “double” sprint in K390 and micarta (OD Green?) would have no trouble flying off the shelves.

Great opportunity to capitalize and turn this big win (with residual disappointment as evidenced here in the forum) into an even bigger win.

[Leader2light]

Pretty sure bladeHQ is all that is left, folks. I guess they won't release until next week.

[JRinFL]

Maybe this a bad time, but what do you guys think of a green Micarta Cruwear Shaman, or maybe a green Micarta with another exotic steel? I could argue for a larger quantity.

sal

Sal, I’m just adding to the din at this point, but I’d say after all this uproar, Spyderco is looking at plenty of additional margin ripe for the taking.

Like they say, scratch where it itches. When a sprint is selling out in minutes or even seconds, that’s a big itch.

Just my 0.02, but I’d wager another ~1200 piece Crucarta sprint (denim? probably doesn’t matter too much) AND a ~2400 piece “double” sprint in K390 and micarta (OD Green?) would have no trouble flying off the shelves.

Great opportunity to capitalize and turn this big win (with residual disappointment as evidenced here in the forum) into an even bigger win.

I cannot disagree with any of the above.

[SpyderPhreak]

Sprints have always been a bit crazy, but this one is on a whole new level.

[curlyhairedboy]

I feel like there's also been an expanding market awareness of what Spyderco offers in the past year. I'm seeing more spoon clips on pockets when I'm out and about.

[ekastanis]

In order to provide a little entertainment, and because every thread needs pictures, get a load of what someone did to one of these. Dyed scales, stonewashed blade, and "flame ano'ed" hardware:

[Leader2light]

I guess this was a bad time to try and get a sprint knife? I never had tried before... How long are custom runs like saint nicks knives usually in stock? 5min? 15min?

[BLM]

In order to provide a little entertainment, and because every thread needs pictures, get a load of what someone did to one of these. Dyed scales, stonewashed blade, and "flame ano'ed" hardware:

horrible abomination

[Larry_Mott]

In order to provide a little entertainment, and because every thread needs pictures, get a load of what someone did to one of these. Dyed scales, stonewashed blade, and "flame ano'ed" hardware:

Jesus wept...

[elduderino04]

Jesus wept...

Haha, not to my taste, but look on the bright side: that guy definitely didn't buy this purely to flip it for profit. I say good for him.

[curlyhairedboy]

I think the st. nick's red scales look a lot better than that.

[SpyderPhreak]

In order to provide a little entertainment, and because every thread needs pictures, get a load of what someone did to one of these. Dyed scales, stonewashed blade, and "flame ano'ed" hardware:

At least he made it his, and isn't looking to flip it. Good for that guy, these are the folks that this is made for! While I don't care for his taste, glad to see one that didn't get snatched up by a flipper.

[sal]

Hi Elduderino,

We asked Crucible to make Cruwear a while back. They decide to powder it for us. I think it was a good move on their part.

sal

[Larry_Mott]

In order to provide a little entertainment, and because every thread needs pictures, get a load of what someone did to one of these. Dyed scales, stonewashed blade, and "flame ano'ed" hardware:

At least he made it his, and isn't looking to flip it. Good for that guy, these are the folks that this is made for! While I don't care for his taste, glad to see one that didn't get snatched up by a flipper.

You have a valid point. Couldn't hold back my personal spontaneous reaction though

[Evil D]

Hi DTPrime BLM,

Welcome to our forum.

Hey Evil,

I learned to remove my finger after the drip begins. I wanted the longer guard as part of the design.

Thanx mb1.

sal

Yeah I do the same and I must say I do like how much guard it makes. It's almost enough to be a flipper....

[sal]

Maybe this a bad time, but what do you guys think of a green Micarta Cruwear Shaman, or maybe a green Micarta with another exotic steel? I could argue for a larger quantity.

sal

Sal, I’m just adding to the din at this point, but I’d say after all this uproar, Spyderco is looking at plenty of additional margin ripe for the taking.

Like they say, scratch where it itches. When a sprint is selling out in minutes or even seconds, that’s a big itch.

Just my 0.02, but I’d wager another ~1200 piece Crucarta sprint (denim? probably doesn’t matter too much) AND a ~2400 piece “double” sprint in K390 and micarta (OD Green?) would have no trouble flying off the shelves.

Great opportunity to capitalize and turn this big win (with residual disappointment as evidenced here in the forum) into an even bigger win.

Hi Hank,

We operate on pretty fixed margins. Enough to run our company and take care of our crew. We'll make less on some makers because their prices are very high, but we don't generally raise prices on a hot item. We feel that "to charge as much as the market will bare" is biting the hand that feeds you.

sal

[elduderino04]

Hi Elduderino,

We asked Crucible to make Cruwear a while back. They decide to powder it for us. I think it was a good move on their part.

sal

That's awesome Sal, I forgot that history about the development. It definitely seems like a great product for them. If it makes economic sense for Spyderco, I for one would love if Cruwear became an evergreen option across the line, like S110V. I have to think it would be very well received.

[Mzen]

Green micarta here. As for steel, Cru-Wear or 4V would be my choices, gotta keep the tough folder theme consistent. And throw in a nice stonewash finish on that blade while you're there Sal

[SpyderPhreak]

Hi Hank,

We operate on pretty fixed margins. Enough to run our company and take care of our crew. We'll make less on some makers because their prices are very high, but we don't generally raise prices on a hot item. We feel that "to charge as much as the market will bare" is biting the hand that feeds you.

sal

And this is exactly why I love Spyderco, among other reasons. Like putting up with us crazy knife knuts, steel snobs, etc.