Shipping of internal parts
Re: Shipping of internal parts
Hey, Sal! I’m new on here and love how involved you are, it’s awesome. Since this is being necro’d...
For many, taking apart and working on their knives is a major part of the hobby. Also, a lot of these knives take quite a beating.
For those two reasons, I feel really strongly that every manufacturer should be willing to ship internal parts. It would make aspects of the hobby much more enjoyable and less stressful.
That being said, I’ve never had a spyderco part break on me. It’s a much bigger deal with Benchmade - I’ve broken an omega spring through normal use and having to send my knife away for a couple weeks when I could have easily replaced the part Myself was pretty infuriating. And even though my Benchmades are great knives, I enjoy them a LOT less now just because that happened once and now I worry about it.
So even though it’s less necessary with Spydercos, it would still be an awesome thing to do for your customers, it would present another advantage over your competition, and it would set a new industry precedent that I’d really appreciate.
To answer your other question,
I own...
A Delica w/Emerson wave
Three Manix 2’s - Blurple S110v, KC cruwear, and BHQ M4
ShamN BHQ M4
PM2 Bento M390
Para 3 earth brown s35vn
No counterfeits
Currently got my eye on the para 3 lw as well.
And I’d absolutely be willing to pay for shipping and even a small cost for the parts themselves.
Thanks!
Aaron
For many, taking apart and working on their knives is a major part of the hobby. Also, a lot of these knives take quite a beating.
For those two reasons, I feel really strongly that every manufacturer should be willing to ship internal parts. It would make aspects of the hobby much more enjoyable and less stressful.
That being said, I’ve never had a spyderco part break on me. It’s a much bigger deal with Benchmade - I’ve broken an omega spring through normal use and having to send my knife away for a couple weeks when I could have easily replaced the part Myself was pretty infuriating. And even though my Benchmades are great knives, I enjoy them a LOT less now just because that happened once and now I worry about it.
So even though it’s less necessary with Spydercos, it would still be an awesome thing to do for your customers, it would present another advantage over your competition, and it would set a new industry precedent that I’d really appreciate.
To answer your other question,
I own...
A Delica w/Emerson wave
Three Manix 2’s - Blurple S110v, KC cruwear, and BHQ M4
ShamN BHQ M4
PM2 Bento M390
Para 3 earth brown s35vn
No counterfeits
Currently got my eye on the para 3 lw as well.
And I’d absolutely be willing to pay for shipping and even a small cost for the parts themselves.
Thanks!
Aaron
Re: Shipping of internal parts
Hi Aaron,
Welcome to our forum.
Thanx much for the; support, input and kind words. Charlynn in customer service has been exceptional in dealing with this issue, even for overseas customers.
sal
Welcome to our forum.
Thanx much for the; support, input and kind words. Charlynn in customer service has been exceptional in dealing with this issue, even for overseas customers.
sal
Re: Shipping of internal parts
I can confirm that!sal wrote: Charlynn in customer service has been exceptional in dealing with this issue, even for overseas customers.
CQI idea implemented not only in product making but also in customer service.
Thank You all!
My spyder:'s: Military Camo, Paramilitary 2 CTS-XHP Orange, Paramilitary 2 CTS-204P Green, Endura 4 ZDP-189 ComboEdge BRG, Endura 4 ZDP-189 FFG BRG, Manix 2 Lightweight Blue, Caly 3 G-10, Salt 1 Yellow SE C88SYL, Ulize, Manix I C95, Manix 2 XL S90v CF, Delica 4 CE Black C11PCBBK, Manix 2 154CM, Military All Black C36GPBK, Stretch SE C90SBK Black FRN, Caly3 CF ZDP-189/420J2, Sage 3 BoltLock CF, Gayle Bradley C134CFP, Squarehead C193TIP, Pacific Salt Yellow SE C91SYL, Pacific Salt Black C91PBK, Ladybug 3 Salt LYL3, Stretch CF ZDP-189 C90CF, Lum Large Chinese Folder C143G, Perrin Street Bowie FB04PBB, Mantra Titanium C202TI, Farid K-2 Titanium C185TI, Para 3 C223GPGYCW Para 3 Cruwear
Re: Shipping of internal parts
It's not an internal part, but will Spyderco send me a replacement pivot screw (or a matching pair)? Mine has always been loose on my PM2 and it fell out somewhere? Now I can't use my knife of choice (even over my Sebenza, XM-18, and SMF) since I'm afraid that the blade will come off.
Re: Shipping of internal parts
Hi Kadinh,
It would depend on what model and version? Sometimes e would have to see the knife to make that determination. Have you contacted customer service?
sal
It would depend on what model and version? Sometimes e would have to see the knife to make that determination. Have you contacted customer service?
sal
Re: Shipping of internal parts
thank you for your reply Sal!sal wrote: Hi Kadinh,
It would depend on what model and version? Sometimes e would have to see the knife to make that determination. Have you contacted customer service?
sal
I have not contacted them. I remember reading that Spyderco (it might have been another company, my memory isn't great) will not send out parts. I looked online and read through this forum and thought differently. I will contact CS and see what they say. thanks!
PS - for the record, i have the s110v "blurple" PM2
Re: Shipping of internal parts
I will be interested to see what they say. Every time I've contacted Spyderco customer service they've just flatly said they don't ship internal parts no matter the circumstance, end of discussion.kadinh wrote: ↑Wed Sep 25, 2019 4:33 pmthank you for your reply Sal!sal wrote: Hi Kadinh,
It would depend on what model and version? Sometimes e would have to see the knife to make that determination. Have you contacted customer service?
sal
I have not contacted them. I remember reading that Spyderco (it might have been another company, my memory isn't great) will not send out parts. I looked online and read through this forum and thought differently. I will contact CS and see what they say. thanks!
PS - for the record, i have the s110v "blurple" PM2
- bbturbodad
- Member
- Posts: 1180
- Joined: Sun Mar 24, 2019 9:18 am
Re: Shipping of internal parts
I finally got bit by the no shipping of internal parts policy. I asked if I could purchase a replacement detent ball for my Smock as the spring shot it out to I have NO IDEA where, but I gave up looking for it after an hour.
Based on this thread I wasn't surprised Spyderco wouldn't let me just purchase the part but I have to wonder if each request is actually considered or is just policy to say no. The reason I ask is because the response I received said they don't ship parts but that I could send my knife in for a free basic sharpening.
It's nice that Spyderco offers free sharpening for those that want/need the service but I just want to buy (and am willing to pay a big premium) a ball bearing.
Based on this thread I wasn't surprised Spyderco wouldn't let me just purchase the part but I have to wonder if each request is actually considered or is just policy to say no. The reason I ask is because the response I received said they don't ship parts but that I could send my knife in for a free basic sharpening.
It's nice that Spyderco offers free sharpening for those that want/need the service but I just want to buy (and am willing to pay a big premium) a ball bearing.
-Turbo
Re: Shipping of internal parts
I just received a brand new and authentic Delica that came with one washer. I could tell when looking at the pivot but I opened it up to confirm. Yep, one bronze washer. Contacted Spyderco and was told that they won't send me a washer. Frustrating.
That size washer is apparently not readily available on the internet so the knife would have to be sent in at my cost.
That size washer is apparently not readily available on the internet so the knife would have to be sent in at my cost.
- bbturbodad
- Member
- Posts: 1180
- Joined: Sun Mar 24, 2019 9:18 am
Re: Shipping of internal parts
I finally got around to sending in my Smock to replace the ball bearing I lost. It was delivered to Spyderco on Monday and I just received tracking for its return home!
Pleasantly surprised by the quick turnaround. :D
Pleasantly surprised by the quick turnaround. :D
-Turbo
- MichaelScott
- Member
- Posts: 3008
- Joined: Mon Apr 13, 2015 11:42 am
- Location: Southern Colorado
Re: Shipping of internal parts
If you do some simple google searches you will find knife equipment suppliers (and others) that sell every conceivable bronze washer.ABX2011 wrote: ↑Wed Oct 23, 2019 11:09 amI just received a brand new and authentic Delica that came with one washer. I could tell when looking at the pivot but I opened it up to confirm. Yep, one bronze washer. Contacted Spyderco and was told that they won't send me a washer. Frustrating.
That size washer is apparently not readily available on the internet so the knife would have to be sent in at my cost.
You got a knife with an issue. You could return it. Looking from the other side, since you “opened it up” how would I know you didn’t lose or damage one washer. I’m not saying you did, only now it is impossible to objectively determine.
Overheard at the end of the ice age, “We’ve been having such unnatural weather.”
http://acehotel.blog
Team Innovation
http://acehotel.blog
Team Innovation
- MichaelScott
- Member
- Posts: 3008
- Joined: Mon Apr 13, 2015 11:42 am
- Location: Southern Colorado
Re: Shipping of internal parts
For those of you new to this thread topic there is another from a couple of years ago that discussss in detail why it is no trivial matter for Spyderco to routinely stock and ship parts on demand. It’s a long and involved discussion which generated a lot of heat, some being downright personal but it does illuminate why something so seemingly simple is actually complex and costly.
Most people won’t find a read it which is too bad since like the latest Terminator it just won’t die.
Most people won’t find a read it which is too bad since like the latest Terminator it just won’t die.
Overheard at the end of the ice age, “We’ve been having such unnatural weather.”
http://acehotel.blog
Team Innovation
http://acehotel.blog
Team Innovation
Re: Shipping of internal parts
That washer size isn't available from any of the sites I could find. I also contacted a well known knife modder who confirmed that and said in the past he had contacted Spyderco for replacements and they complied.MichaelScott wrote: ↑Wed Nov 20, 2019 6:32 pmIf you do some simple google searches you will find knife equipment suppliers (and others) that sell every conceivable bronze washer.ABX2011 wrote: ↑Wed Oct 23, 2019 11:09 amI just received a brand new and authentic Delica that came with one washer. I could tell when looking at the pivot but I opened it up to confirm. Yep, one bronze washer. Contacted Spyderco and was told that they won't send me a washer. Frustrating.
That size washer is apparently not readily available on the internet so the knife would have to be sent in at my cost.
You got a knife with an issue. You could return it. Looking from the other side, since you “opened it up” how would I know you didn’t lose or damage one washer. I’m not saying you did, only now it is impossible to objectively determine.
There are many knife companies who will send out replacement parts for free.
Re: Shipping of internal parts
Does spyderco sell knife scales? Sorry I haven't read the whole thread...
shaztecs_knives on instagram
Re: Shipping of internal parts
There are tons available on eBay, though, from people who have replaced their factory scales. I've actually given some of my factory scales away after replacing them.
-
- Member
- Posts: 18
- Joined: Wed Mar 25, 2020 3:44 am
Re: Shipping of internal parts
Would a new liner for an Endura due to stripped clip screw hole be under warranty. Or could I buy it
- MichaelScott
- Member
- Posts: 3008
- Joined: Mon Apr 13, 2015 11:42 am
- Location: Southern Colorado
Re: Shipping of internal parts
Who did the stripping? If it was you, very likely not. Have you actually read the warranty?
Overheard at the end of the ice age, “We’ve been having such unnatural weather.”
http://acehotel.blog
Team Innovation
http://acehotel.blog
Team Innovation
Re: Shipping of internal parts
I’m the original owner, so you could say I did in a sense, but I don’t exactly consider it a fault of mine really. I’ve changed multitudes of clips on spyderco knives and this one just won’t bite into the liner like the other Endura’s I’ve changed. It just spins. And not because it’s been over tightened by any means. It just spins when trying to screw it in. I’m not looking for free stuff, I’d be more than happy to purchase the piece I need. But I know spyderco is finicky with sending knife parts, hence the question.MichaelScott wrote: ↑Mon May 04, 2020 6:36 pmWho did the stripping? If it was you, very likely not. Have you actually read the warranty?
Yes I’ve read the warranty.
I could be misreading your reply but you sound like you are being condescending which I don’t appreciate. I’m a long time spyderco knife user and purchaser, and have bought well over 100 spyderco knives and spent a ridiculous amount of money over the years. All I’m asking for is the info on how or if I could get a part for one of them. If I’m not correctly reading your post then I apologize.