Mourning for the brick and mortar stores
-
- Member
- Posts: 332
- Joined: Sun Feb 03, 2019 8:02 pm
Mourning for the brick and mortar stores
Woah is me!
Yesterday was my day off work. After taking care of all my usual tasks i found myself suffering from a case of boredom.
Then it came to me! Why not do a little window/actual shopping? So I start searching online for some stores to visit that might carry the one brand of knife i've got my eye on.
Literally all i found for Tampa were walmarts and Ace hardware. All that Walmart had were the budget line.
The only other ones i found were flea markets that were closed (plus they had no spyders)
What happened!?
Yesterday was my day off work. After taking care of all my usual tasks i found myself suffering from a case of boredom.
Then it came to me! Why not do a little window/actual shopping? So I start searching online for some stores to visit that might carry the one brand of knife i've got my eye on.
Literally all i found for Tampa were walmarts and Ace hardware. All that Walmart had were the budget line.
The only other ones i found were flea markets that were closed (plus they had no spyders)
What happened!?
Re: Mourning for the brick and mortar stores
Internet/Amazon/eBay happened. At this point, we are lucky to have the online knife stores that we do have.
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Mourning for the brick and mortar stores
I agree 100 percent and I am glad you posted this. I remember reading various knife magazines and periodicals years ago (1990s and before) and there were numerous brick and mortar knife stores, and even a knife kiosk opportunity for people to get as a franchise and open in malls. What happened? A combination of the internet shopping and strict knife laws and lack of demand?
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Mourning for the brick and mortar stores
Good point. And if you will allow some speculation, perhaps advanced 3d printers will allow each of us to download the blueprints to a new Spyderco knife from Spyderco headquarters and print it out on demand.
Re: Mourning for the brick and mortar stores
Times have changed ... not only is product (generally speaking and not just specific to Spyderco) selection not so abundant, neither is staff. Throw in knowledgeable staff an the picture gets even slimmer. Seems one's best bet is to google information, read-read-read and youtube, then buy on-line.
Even here in the Denver metro area, home of Spyderco, the product isn't well represented outside the SFO. I see WAY more butterfly brand knives stocked and showcased locally.
CG
Even here in the Denver metro area, home of Spyderco, the product isn't well represented outside the SFO. I see WAY more butterfly brand knives stocked and showcased locally.
CG
So many knives - so little funds!!!
Re: Mourning for the brick and mortar stores
Plus people use brick and mortar stores to see the product in person then go online and buy it cheaper somewhere else
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Mourning for the brick and mortar stores
I notice that, too. Is this because the brick and mortar stores often have to take the costs of overhead such as location and utilities into account, whereas the online retailers do not have the same costs, so they can sell the knives at lower prices?Spydergirl88 wrote: ↑Sat Jul 13, 2019 10:43 amPlus people use brick and mortar stores to see the product in person then go online and buy it cheaper somewhere else
I still remember seeing the Spyderco Stainless Handled Clip Its for sale in stores, behind the display cases. It was a sight to behold.
-
- Member
- Posts: 51
- Joined: Thu Aug 16, 2018 6:55 pm
Re: Mourning for the brick and mortar stores
Some of my favorite online Spyderco retailers also maintain B&Ms -- DLT Trading, GPKnives, River's Edge, St. Nick's -- so it's not like they're all gone. The ones that have survived are great shops with competitive prices but of course you have to be lucky enough to live near one. Knife retailing is one of those things like guns that hasn't been completely obsoleted by the internet due to the nature of the product. Even the bigger players in the online space are little guys in the grand scheme of things. I hope it stays that way.
Re: Mourning for the brick and mortar stores
As true as this possibly is, I don’t see it happening for a while. 3D printing has come a long way, but it definitely has its limits. I don’t see us printing in carbon fiber/G10 any time soon :)SpyderEdgeForever wrote: ↑Sat Jul 13, 2019 10:24 amGood point. And if you will allow some speculation, perhaps advanced 3d printers will allow each of us to download the blueprints to a new Spyderco knife from Spyderco headquarters and print it out on demand.
As for St. Nicks, REC, BHQ, ETC I think those places are nice to have, but for me personally I can only realistically visit Blade HQ. They’re an hour from me, so even that is hard to do.
Re: Mourning for the brick and mortar stores
Local shops were never great. No shop has ever stocked every Spyderco model available and I’ve never seen one at a competitive price in 15 years. The internet has done wonderful things for the knife industry.
Last edited by zhyla on Sat Jul 13, 2019 11:41 am, edited 1 time in total.
Re: Mourning for the brick and mortar stores
My experience at brick and mortar was always pretty negative. This was mostly at gun shops. Poor attitudes. Unhelpful, confrontational. Talk down to you. Lack of understanding or care that you want something other than their favorite or suggestion. I’m sure there are some good ones out there, but screw em. Glad they are gone.
Re: Mourning for the brick and mortar stores
Just found out there is one decent knife shop here... and it's only open m-f 9 to 5. Guess they don't have many customers with jobs?
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: Mourning for the brick and mortar stores
Folks, be glad you don´t live here in Salzburg / Austria...(JUST in terms of knife stores of course, other than that it´s a great place to live...)
I am aware of only one single store in the hole state / county of Salzburg (which has like 530 000 inhabitants, the capital, also called Salzburg, has about 150 000 inhabitants and is the fourth largest city of the Republic of Austria) that carries at least one Spyderco model. It´s a hunting store, and the model I saw there was a SERRATED Military (I am not a hunter myself, but I guess a serrated edge is probably not the first choice here??)...
There was a second store that had some REALLY overpriced Spydies till like two years ago, but not anymore...
I would not know what to do without online stores. Maybe in the big German city Munich (about a 150 km / 95 miles drive from the city of Salzburg) could be some knife stores carrying Spydercos, don´t know...
I am aware of only one single store in the hole state / county of Salzburg (which has like 530 000 inhabitants, the capital, also called Salzburg, has about 150 000 inhabitants and is the fourth largest city of the Republic of Austria) that carries at least one Spyderco model. It´s a hunting store, and the model I saw there was a SERRATED Military (I am not a hunter myself, but I guess a serrated edge is probably not the first choice here??)...
There was a second store that had some REALLY overpriced Spydies till like two years ago, but not anymore...
I would not know what to do without online stores. Maybe in the big German city Munich (about a 150 km / 95 miles drive from the city of Salzburg) could be some knife stores carrying Spydercos, don´t know...
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Mourning for the brick and mortar stores
Don't know why it is, but nowadays, gun sales seems to bring out the A**Hole in most everybody - both sides of the counter.SF Native wrote: ↑Sat Jul 13, 2019 11:41 amMy experience at brick and mortar was always pretty negative. This was mostly at gun shops. Poor attitudes. Unhelpful, confrontational. Talk down to you. Lack of understanding or care that you want something other than their favorite or suggestion. I’m sure there are some good ones out there, but screw em. Glad they are gone.
CG
So many knives - so little funds!!!
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Mourning for the brick and mortar stores
Wartstein my friend, wow that is very sad and thank you for sharing that news. This is so different from what I heard in the past: A person of German descent many years ago told me that in the middle 1980s and before, back into the 1970s, and the 1950s, after the Second World War, and then before the World Wars, Germany and Austria had literally thousands of large and small knife and cutlery shops, not including all of the hand/custom making knife artisans to be found in every town and larger village. The pride and gladness of the quality of Austrian and Solingen German steel, he said, was incredible, and it was some of the best steel in the world, if not THE BEST. He said back in those days you could find what we would call brick and mortar knife stores selling folding pocket, pen, hunting, and fishing knives, and fixed blades from small traditional Bavarian sheath knives, on up to full-sized daggers, swords, and HUNTING SPEARS, for reasonable prices, all made in Germany and Austria, and even some with the newer materials (more like in the 1970s to 1980s) such as composition plastic and stainless steel. Then according to what you posted, this situation has changed since the 1990s and on?Wartstein wrote: ↑Sat Jul 13, 2019 12:51 pmFolks, be glad you don´t live here in Salzburg / Austria...(JUST in terms of knife stores of course, other than that it´s a great place to live...)
I am aware of only one single store in the hole state / county of Salzburg (which has like 530 000 inhabitants, the capital, also called Salzburg, has about 150 000 inhabitants and is the fourth largest city of the Republic of Austria) that carries at least one Spyderco model. It´s a hunting store, and the model I saw there was a SERRATED Military (I am not a hunter myself, but I guess a serrated edge is probably not the first choice here??)...
There was a second store that had some REALLY overpriced Spydies till like two years ago, but not anymore...
I would not know what to do without online stores. Maybe in the big German city Munich (about a 150 km / 95 miles drive from the city of Salzburg) could be some knife stores carrying Spydercos, don´t know...
He told me that in old Austria and Germany, there were hand knife making artisans who within a week or two could produce any knife design you wanted, as long as it used old style materials such as fine carbon steel, stag, wood, leather for the sheath, and other materials, and these people were to be found in nearly every large town and village.
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Mourning for the brick and mortar stores
Here is a related question for you all about this: How difficult would it be in this day and age for a serious Spyderco fan to open a brick and mortar knife store of their own, and sell almost exclusive Spyderco knives, at competitive prices? If they opened in an area that had many outdoorspeople who were into hunting, fishing, hiking, camping, and related activities, and the area was known for things such as white water rafting, and other outdoor activities, would they have a good liklihood of large sales of said knives, or would it be a tremendous risk of failure in this day and age?
Re: Mourning for the brick and mortar stores
There is a military surplus store on the way to my parents, that has a pretty good selection. Including S35V PM2, ZDP Endura, SE Pacif Salt, Shaman, G10 Stretch, and bunch others. Other brands as well. Surprising but nice to have. Picked up couple of blades there.
Peter
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Mourning for the brick and mortar stores
That is very good. Also that way you get to see and feel how the particular model you are interested in feels in the hand and you can look it over at all angles.anycal wrote: ↑Sat Jul 13, 2019 3:56 pmThere is a military surplus store on the way to my parents, that has a pretty good selection. Including S35V PM2, ZDP Endura, SE Pacif Salt, Shaman, G10 Stretch, and bunch others. Other brands as well. Surprising but nice to have. Picked up couple of blades there.
Re: Mourning for the brick and mortar stores
There's still one close to me but he doesn't carry a big selection of Spyderco's anymore, just the safer bet type models. He does however carry dozens of BM models.
All SE all the time since 2017
~David
~David
Re: Mourning for the brick and mortar stores
You know, it’s been so long since I’ve been to a “gun store” because of this very reason. I forgot how horrible the customer service is, and you pretty much nailed it on the head. I tried so many ways to get service without a sigh, or a grunt, but there’s no chance with them.cycleguy wrote: ↑Sat Jul 13, 2019 3:32 pmDon't know why it is, but nowadays, gun sales seems to bring out the A**Hole in most everybody - both sides of the counter.SF Native wrote: ↑Sat Jul 13, 2019 11:41 amMy experience at brick and mortar was always pretty negative. This was mostly at gun shops. Poor attitudes. Unhelpful, confrontational. Talk down to you. Lack of understanding or care that you want something other than their favorite or suggestion. I’m sure there are some good ones out there, but screw em. Glad they are gone.
CG
This is also a valid post. I prefer it the way it is today, all things considered.zhyla wrote: Local shops were never great. No shop has ever stocked every Spyderco model available and I’ve never seen one at a competitive price in 15 years. The internet has done wonderful things for the knife industry.