You can run any model you want in LC200N. Which do you choose?
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: You can run any model you want in LC200N. Which do you choose?
I'm also going to need some LC200N Jester Salts with Glow in the Dark FRN scales in both PE and SE LC200N! :D
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: You can run any model you want in LC200N. Which do you choose?
I'm with you. I think some of the most popular models should be standard production with the basic stainless steel but also in a salt model and in a model with premium steel which could be M4, S110V 4V or Cruwear, whichever fits the model the best. PM2 would be at the top of this list.amateur blacksmith wrote: ↑Sat Jul 06, 2019 2:39 amThis is gonna be a popular wish me thinks but I'll have to go with a PM2, 2nd choice Manix 2
Re: You can run any model you want in LC200N. Which do you choose?
The more I think about it I believe LC200N would be ideal for the HARPY model. Or if they ever resurrect the MERLIN model that would also be a great steel to use for it as well.
It seems like those Nitrogen based blade steels seem to work well in specialty type models with my tested uses.
It seems like those Nitrogen based blade steels seem to work well in specialty type models with my tested uses.
Re: You can run any model you want in LC200N. Which do you choose?
Ideally, I'd love to see several popular models to have permanent options/versions in LC200N. Military, PM2, Para 3, Endura, Police 4, etc. I doubt it will ever happen, though. I really love LC200N.
Jim
Jim
Re: You can run any model you want in LC200N. Which do you choose?
I'm loving the LC, hoping we see it in many more of the models. The lightweight Caly 3.5 or police model would do it for me. If there was a lightweight Millie version that would also work. While we're at it, a pe Catcherman would also be nice.
- cabfrank
- Member
- Posts: 2884
- Joined: Sun May 08, 2011 9:07 pm
- Location: Northern California, USA, Earth
Re: You can run any model you want in LC200N. Which do you choose?
Para 3 Lightweight. Blue, bright green or orange would be nice. Might as well make it full Salt too.
Re: You can run any model you want in LC200N. Which do you choose?
UKPK, both leaf and drop point, please or FRN Stretch or Chappy LTW.
'The future is already here;it's just not evenly distributed'
William Gibson
William Gibson
Re: You can run any model you want in LC200N. Which do you choose?
+1 for the last two on your list
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: You can run any model you want in LC200N. Which do you choose?
I would guess that the Manix 2 LW would be first and most likely from that list, since the other LC200N models are made in Golden. Be nice if the Seki FRN lineup did a run though and we got that Dragonfly
Re: You can run any model you want in LC200N. Which do you choose?
Catcherman PE please
Re: You can run any model you want in LC200N. Which do you choose?
Yes, it is time for a new Catcherman. That is one model that has eluded me. No better steel than LC200N!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: You can run any model you want in LC200N. Which do you choose?
While highly unlikely I think it would be amazing if they made a linerless backlock version of the Gayle Bradley Air with LC200N and a wire pocket clip. Handle scales could be something like CF or jigged titanium to keep it a “gents knife” or G-10 for a most cost effective option..
Re: You can run any model you want in LC200N. Which do you choose?
Also if we're talking any model. Spyderco Kris. Just bring it back. Don't even care what steel.
-
- Member
- Posts: 594
- Joined: Sun Mar 30, 2014 9:47 am
-
- Member
- Posts: 188
- Joined: Tue Feb 20, 2018 7:15 pm
- Location: Florida
Re: You can run any model you want in LC200N. Which do you choose?
Great to see all the love for the catcherman.
I've got an old combo edge that's seen better days. Would love to replace that one with a PE, seeing how the combo edge doesn't really fillet well.
But I also want a SE one for around the house & yard. 4.313" (110mm) of pure cutting awesomeness.
I've got an old combo edge that's seen better days. Would love to replace that one with a PE, seeing how the combo edge doesn't really fillet well.
But I also want a SE one for around the house & yard. 4.313" (110mm) of pure cutting awesomeness.
Currently have 163 :spyder: 's & 41 different steels.
Bench Stones Atoma Diamond Plate 140,400,600,1200. Naniwa Chosera 400,800,1000,3000,5000.
Shapton Glass 1000,6000. Suehiro Rika 5000. Shapton Pro 320,1000,2000,5000,8000.
Naniwa Bonded Diamond 400,600,800,1000,3000,6000. Venev Gen2 OCB Combo Diamond 800/1200.
Spyderco 306UF, 306CBN. Doublestuff2 303FCBN2, & 204MF Sharpmaker w/204CBN for Spidie Edges.
Want List Steels 15V, S125V, K490, M398, Magnacut, S390, SRS-15, Vanadis 8, Vanax SC, Vancron SC,
Bench Stones Atoma Diamond Plate 140,400,600,1200. Naniwa Chosera 400,800,1000,3000,5000.
Shapton Glass 1000,6000. Suehiro Rika 5000. Shapton Pro 320,1000,2000,5000,8000.
Naniwa Bonded Diamond 400,600,800,1000,3000,6000. Venev Gen2 OCB Combo Diamond 800/1200.
Spyderco 306UF, 306CBN. Doublestuff2 303FCBN2, & 204MF Sharpmaker w/204CBN for Spidie Edges.
Want List Steels 15V, S125V, K490, M398, Magnacut, S390, SRS-15, Vanadis 8, Vanax SC, Vancron SC,
Re: You can run any model you want in LC200N. Which do you choose?
I haven't thought of that one in a long time!
Me want!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: You can run any model you want in LC200N. Which do you choose?
Military for sure.
Re: You can run any model you want in LC200N. Which do you choose?
Pacific Salt SE with the current Endura 3 handle and a pointier tip.
- ChrisinHove
- Member
- Posts: 4082
- Joined: Tue Dec 17, 2013 8:12 am
- Location: 27.2046° N, 77.4977° E