You can run any model you want in LC200N. Which do you choose?

Discuss Spyderco's products and history.
JD Spydo
Member
Posts: 23532
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: You can run any model you want in LC200N. Which do you choose?

#21

Post by JD Spydo »

elena86 wrote:
Sat Jul 06, 2019 7:21 am
Millie
I could go for that if they would also make a Spyderedged version too.

I do believe we'll see a Millie in a Nitrogen based blade steel within the next year or two.
User avatar
ferider
Member
Posts: 812
Joined: Tue Dec 26, 2017 1:41 pm
Location: California
Contact:

Re: You can run any model you want in LC200N. Which do you choose?

#22

Post by ferider »

A fluted Ti Military, so I don't have to worry about liners or lock corroding.

Then again, already have one in S110V, that's darn close wrt corrosion-resistance, and harder and more wear resistant. Maybe I don't need the LC200N Military after all :)
User avatar
abbazaba
Member
Posts: 4673
Joined: Mon Nov 09, 2015 3:40 pm
Location: New England

Re: You can run any model you want in LC200N. Which do you choose?

#23

Post by abbazaba »

Another vote for the PM2, hopefully FRN LW with wire clip.

A yellow Manix2 LW seems inevitable (and awesome) :)
User avatar
The Mastiff
Member
Posts: 5935
Joined: Sun Jun 04, 2006 2:53 am
Location: raleigh nc

Re: You can run any model you want in LC200N. Which do you choose?

#24

Post by The Mastiff »

A model that already has FRN as an option. I prefer a backlock as well. An Endura or Stretch for me.
User avatar
tonijedi
Member
Posts: 1189
Joined: Wed Oct 03, 2012 10:08 am
Location: Portugal

Re: You can run any model you want in LC200N. Which do you choose?

#25

Post by tonijedi »

Salt 2
User avatar
Ankerson
Member
Posts: 6917
Joined: Sat Jul 24, 2010 1:23 pm
Location: Raleigh, NC

Re: You can run any model you want in LC200N. Which do you choose?

#26

Post by Ankerson »

Vivi wrote:
Sat Jul 06, 2019 1:47 am
If you could pick any model to sprint run in LC200N, which would you choose?

I'd go with the Native Chief. With the linerless construction I think it would be easy to turn it into a full fledged Salt. I'm planning to pick one up in S30V but LC200N would make it even more special.

Secone choice would be a Police 4 Lightweight.

Which model would you like to see in LC200N?

Military Salt. :cool:
User avatar
SpyderEdgeForever
Member
Posts: 6325
Joined: Mon Jul 23, 2012 6:53 pm
Location: USA

Re: You can run any model you want in LC200N. Which do you choose?

#27

Post by SpyderEdgeForever »

Paramilitary and Military Tanto
Endura
Pacific Salt
Caly 3.5
Native Salt with original Swedge False Edge
Aqua Salt
Caspian Salt Pointed


All of the above in Lc200N.
Pickmansmodel82
Member
Posts: 54
Joined: Tue Dec 04, 2018 11:24 pm

Re: You can run any model you want in LC200N. Which do you choose?

#28

Post by Pickmansmodel82 »

IF I had my druthers I’d like to see an endura sized blade warnie with red frn. Maybe if I Reallllly shot for the moon, blade shaped like Yojimbo 2, as opposed to hump backed warnie.
User avatar
ZrowsN1s
Member
Posts: 7324
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: You can run any model you want in LC200N. Which do you choose?

#29

Post by ZrowsN1s »

PE Hawkbill Dragonfly, Dragonfly, wharncliffe Dragonfly..... and the Chief.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
User avatar
knivesandbooks
Member
Posts: 1455
Joined: Tue Aug 15, 2017 8:43 pm
Location: Tulsa, OK

Re: You can run any model you want in LC200N. Which do you choose?

#30

Post by knivesandbooks »

Slysz Bowie Salt.
Christ is risen from the dead, trampling down death by death, and on those in the tombs bestowing life!
User avatar
Pelagic
Member
Posts: 2440
Joined: Fri Apr 27, 2018 5:49 pm
Location: East Coast/Nomadic

Re: You can run any model you want in LC200N. Which do you choose?

#31

Post by Pelagic »

knivesandbooks wrote:
Sat Jul 06, 2019 12:23 pm
Slysz Bowie Salt.
Wow... K2 salt?
Pancake wrote:
Wed Aug 14, 2019 10:20 pm
Are you a magician? :eek:
Nate wrote:
Thu Apr 04, 2019 4:32 pm
You're the lone wolf of truth howling into the winds of ignorance
Doeswhateveraspidercan wrote:
Sat Jun 15, 2019 9:17 pm
You are a nobody got it?
User avatar
knivesandbooks
Member
Posts: 1455
Joined: Tue Aug 15, 2017 8:43 pm
Location: Tulsa, OK

Re: You can run any model you want in LC200N. Which do you choose?

#32

Post by knivesandbooks »

Pelagic wrote:
Sat Jul 06, 2019 1:05 pm
knivesandbooks wrote:
Sat Jul 06, 2019 12:23 pm
Slysz Bowie Salt.
Wow... K2 salt?
I would do that too.
We need more than one higher end titanium salt option
Christ is risen from the dead, trampling down death by death, and on those in the tombs bestowing life!
User avatar
vaisforlovers
Member
Posts: 445
Joined: Sun Jan 08, 2012 9:10 pm
Location: Nebraska

Re: You can run any model you want in LC200N. Which do you choose?

#33

Post by vaisforlovers »

Dyad Salt, FRN, light weight. The ultimate tackle box knife.

I’ve been lobbying for a Dyad Salt for a decade. I’d settle LC 200N over H1 :)
User avatar
Wartstein
Member
Posts: 15041
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: You can run any model you want in LC200N. Which do you choose?

#34

Post by Wartstein »

I don't need the corrosion resistant properties of LC200N, but if I was to choose in which knives to try it, than I'd opt for 3 of my 4 my most carried and used models: Endura 4, Stretch 1, lately Endela SE.
Concerning the Chap FRN (number 4 of my most carried): The HXP steel is so perfect for me, would not like to see it in another ever.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
ejcr98
Member
Posts: 254
Joined: Mon Mar 21, 2016 1:37 pm

Re: You can run any model you want in LC200N. Which do you choose?

#35

Post by ejcr98 »

G-10 Para 3 with bright red scales but fully salted a la Caribbean.
Nate
Member
Posts: 1907
Joined: Sat Apr 13, 2013 11:25 am
Location: Hurtling through space...

Re: You can run any model you want in LC200N. Which do you choose?

#36

Post by Nate »

I'd like to see the LC200N UKPK that's been talked about happen. Might pick up a Native Salt soon.
:spyder:
User avatar
steelcity16
Member
Posts: 5351
Joined: Mon Dec 11, 2017 11:34 am

Re: You can run any model you want in LC200N. Which do you choose?

#37

Post by steelcity16 »

Chap LW Salt with DLC LC200N blade/hardware and neon day glow glow in the dark yellow FRN scales
:bug-white-red CRU-CARTA THE SEKI MODELS! :bug-white-red AND BRING US THE DODO-FLY! :bug-white-red
User avatar
zippifish
Member
Posts: 57
Joined: Sat Jun 08, 2019 2:14 pm
Location: Pensacola, FL

Re: You can run any model you want in LC200N. Which do you choose?

#38

Post by zippifish »

Chap LW to throw in the board shorts pocket when at the beach or on the boat, DF2 PE would be a close 2nd and the Native Chief just because.
vivi
Member
Posts: 13846
Joined: Mon Oct 29, 2007 8:15 am

Re: You can run any model you want in LC200N. Which do you choose?

#39

Post by vivi »

Chris_P_Bacon wrote:
Sat Jul 06, 2019 6:47 am
The four that still sit on my want list are;
PM2
Swick 5
Catcherman PE
Catcherman SE
Swick 5 is in the works (LC200N), last time Sal mentioned it he said they were shooting for a 2019 release.
:unicorn
User avatar
xceptnl
Member
Posts: 8594
Joined: Mon Feb 21, 2011 7:48 pm
Location: Tobacco Country, Virginia
Contact:

Re: You can run any model you want in LC200N. Which do you choose?

#40

Post by xceptnl »

My choices would be:

Military
Caly Jr.
Spyderhawk (PE & FFG)
Image
sal wrote: .... even today, we design a knife from the edge out!
*Landon*
Post Reply