Sal, Can we get CPM 15v?
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Should be cool, I'd love to have a spydie in 15v.
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Sal, Can we get CPM 15v?
How about that!? Exciting!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Sal, Can we get CPM 15v?
Yeah I heard since he has to use it he wants to make sure it's tempered properly so it doesn't break and injure him. Can't say that's a bad idea.Deadboxhero wrote: ↑Fri Jun 14, 2019 9:35 pmThey don't show the tempering in the show. The contests have to quench the blades and one of the judges J.Neilson tempers them off screen before the next challenge.
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Yes, tempering is standard practice across the board for knives. They cut it out of the show for entertainment purposes.VashHash wrote: ↑Sat Jun 15, 2019 2:43 pmYeah I heard since he has to use it he wants to make sure it's tempered properly so it doesn't break and injure him. Can't say that's a bad idea.Deadboxhero wrote: ↑Fri Jun 14, 2019 9:35 pmThey don't show the tempering in the show. The contests have to quench the blades and one of the judges J.Neilson tempers them off screen before the next challenge.
Re: Sal, Can we get CPM 15v?
I wish they’d show some of the extra steps/details on the “cutting deeper” version of the show. Some of the decisions that go into the setups and tests, why they pick the materials they do, etc.
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Nah, the show is for entertainment, not education. The audience limits the amount of details the program can focus on. Just watch to kill time, "read"and "do" if you want to go deeper.
-
- Member
- Posts: 642
- Joined: Tue Jun 27, 2017 8:32 am
- Location: Pacific Northwest
Re: Sal, Can we get CPM 15v?
Based on the geometry Shawn likes it would be a slicer for sure!The Meat man wrote: ↑Sat Jun 15, 2019 7:49 am:eek:
A BBB/Spyderco collab on 15V?! Yes! :D
Justin
Re: Sal, Can we get CPM 15v?
This thread is very exciting to read bbb 15v spyderco for the win
Re: Sal, Can we get CPM 15v?
Just for grins I mic’d the bte on my rex45 pm2. Tried a couple different spots down the blade, it was right around .021” to .022” with a dial micrometer...
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Cleans up nice. I'll continue testing with the remaining unfinished knives and update the thread.
![Image](https://i.imgur.com/pWoHSqq.jpg)
Look forward to seeing some CPM 15v Sal
-Shawn
![Image](https://i.imgur.com/pWoHSqq.jpg)
Look forward to seeing some CPM 15v Sal
-Shawn
Re: Sal, Can we get CPM 15v?
Another work of art. That thing could probably field dress a dozen bucks before it needed touching up, lol.
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Larrin just checked the hardness on a CPM 15v coupon I heat treated and tempered with the custom protocol and it came back 68 HRC
So being that hard and not brittle at the edge and combined with super thin geometry is very exciting.
Re: Sal, Can we get CPM 15v?
What, if anything, could Spyderco do via economies of scale to speed up/reduce the cost of the production? It seems like knives made under this protocol require a lot of attention. Having no experience with stuff like this, I don't see how making more than one at a time will lead to improvements regarding price/time to market.
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
Spyderco is a production company, that is their specialty to figure out.p_atrick wrote: ↑Tue Jun 18, 2019 1:10 pmWhat, if anything, could Spyderco do via economies of scale to speed up/reduce the cost of the production? It seems like knives made under this protocol require a lot of attention. Having no experience with stuff like this, I don't see how making more than one at a time will lead to improvements regarding price/time to market.
I am a custom knife maker, it is my specialty to make the best possible regardless of cost.
Each has it's advantages and disadvantages.
It's always interesting to see what comes out when the two work together.
Last edited by Deadboxhero on Tue Jun 18, 2019 1:45 pm, edited 1 time in total.
- The Mastiff
- Member
- Posts: 5951
- Joined: Sun Jun 04, 2006 2:53 am
- Location: raleigh nc
Re: Sal, Can we get CPM 15v?
I never thought about 15V running that hard. I thought rc 63-64 was tops. If it has decent stability at that hardness it will be in a whole different category from the steels I've tried and not liked such as S125V @ rc 64. Even at rc 65 or so it's got to be a cutting monster. :eek:
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
I'll send ya a Mule to test Joe. I'll finish that m3-1 steel knife as well unless you would rather have the 15v finished thenstead?The Mastiff wrote: ↑Tue Jun 18, 2019 1:38 pmI never thought about 15V running that hard. I thought rc 63-64 was tops. If it has decent stability at that hardness it will be in a whole different category from the steels I've tried and not liked such as S125V @ rc 64. Even at rc 65 or so it's got to be a cutting monster. :eek:
- The Mastiff
- Member
- Posts: 5951
- Joined: Sun Jun 04, 2006 2:53 am
- Location: raleigh nc
Re: Sal, Can we get CPM 15v?
Your choice and at your convenience. :D
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Sal, Can we get CPM 15v?
That is so awesome Shawn. Joe, any feedback you give will be golden.
-
- Member
- Posts: 5858
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Sal, Can we get CPM 15v?
Deadboxhero wrote: ↑Mon Jun 17, 2019 11:19 pmCleans up nice. I'll continue testing with the remaining unfinished knives and update the thread.
Look forward to seeing some CPM 15v Sal
-Shawn
Beautiful!
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"