Cleaning G 10 scales?
- HarleyXJGuy
- Member
- Posts: 1395
- Joined: Fri Aug 29, 2014 8:50 pm
- Location: Michigan
Cleaning G 10 scales?
So I am considering some orange G 10 aftermarket scales for my Cruwear Military.
My question to you all is when they start to get dirty is there a good way to clean them?
My question to you all is when they start to get dirty is there a good way to clean them?
On my radar: 110V Military, Police 4 and some sweet Rex 45 Military action.
Newest Spydies: S90v Ti Military, Pacific Salt and a special Kiwi.
Newest Spydies: S90v Ti Military, Pacific Salt and a special Kiwi.
Re: Cleaning G 10 scales?
Magic Eraser! I used to use a child's toothbrush, warm water and some Dawn but that gets a bit messy. Much easier to use a magic eraser and I think I get better results as well.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: Cleaning G 10 scales?
Magic Eraser will make them look new again but they also shred and wear out fast. You could also try a nail brush and some Barkeeper's Friend.
All SE all the time since 2017
~David
~David
Re: Cleaning G 10 scales?
I have preached this so many times but as far as I know only 2 or 3 ever listened to me. I've been using a product called BALLISTOL for cleaning and rejuvenating G-10 handles for almost better than 10 years now. It not only does a great job of cleaning it also restores and brightens the color of the G-10 and I truly believe it has a preserving effect to it as well.
Now if your G-10 sales are excessively dirty, greasy or grimey then you might want to use some "Platinum Overnight DAWN" dishwashing soap to get rid of the worst of it. I've also had great results cleaning really dirty and greasy G-10 with Bar Keeper's Friend cleanser too. But for the overall cleaning, rejuvenating and preserving I have yet to find any product that works as good as BALLISTOL on G-10 handles.
I usually take a soft bristle toothbrush to gently clean the handle and work it in. It really doesn't take a lot of it for it to work really well. I've even had G-10 material really old and faded and it worked like magic. Now the only negative aspect to it is the it does have a smell that has a petro-chemical odor to it. But it dissipates over time and it's not all that bad considering the great results you get from it.
I recommend getting the big can of BALLISTOL instead of the smaller aerosol cans because it is much cheaper that way and you'll find that BALLISTOL has a lot of great uses to it.
Now if your G-10 sales are excessively dirty, greasy or grimey then you might want to use some "Platinum Overnight DAWN" dishwashing soap to get rid of the worst of it. I've also had great results cleaning really dirty and greasy G-10 with Bar Keeper's Friend cleanser too. But for the overall cleaning, rejuvenating and preserving I have yet to find any product that works as good as BALLISTOL on G-10 handles.
I usually take a soft bristle toothbrush to gently clean the handle and work it in. It really doesn't take a lot of it for it to work really well. I've even had G-10 material really old and faded and it worked like magic. Now the only negative aspect to it is the it does have a smell that has a petro-chemical odor to it. But it dissipates over time and it's not all that bad considering the great results you get from it.
I recommend getting the big can of BALLISTOL instead of the smaller aerosol cans because it is much cheaper that way and you'll find that BALLISTOL has a lot of great uses to it.
- JonLeBlanc
- Member
- Posts: 1756
- Joined: Sun May 13, 2018 8:00 am
- Location: Louisiana
Re: Cleaning G 10 scales?
Just to second the above posts about magic eraser, those things work wonders, but for real though I've been wanting to get a can of ballistol FOREVER and just have been procrastinating about it, bc I suspect (although I can't get any official confirmation) that Spyderco official uses that stuff at the SFO. As has been noted, it's a great product.
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
- HarleyXJGuy
- Member
- Posts: 1395
- Joined: Fri Aug 29, 2014 8:50 pm
- Location: Michigan
Re: Cleaning G 10 scales?
Awesome!
Thanks for the excellent replies everyone
Thanks for the excellent replies everyone
On my radar: 110V Military, Police 4 and some sweet Rex 45 Military action.
Newest Spydies: S90v Ti Military, Pacific Salt and a special Kiwi.
Newest Spydies: S90v Ti Military, Pacific Salt and a special Kiwi.
Re: Cleaning G 10 scales?
G10 is supposed to be highly resistant to chemicals, I wonder if something like brake cleaner or carb cleaner etc would do a good job.
All SE all the time since 2017
~David
~David
Re: Cleaning G 10 scales?
That's interesting you bring that up. Because one time I had a G-10 handle so greasy and slimey that I used a spray can of car starting fluid to cut through it and that worked pretty fast. Then I immediately treated it with BALLISTOL and it turned out great.
I've heard of carb cleaner used for a really wide variety of different cleaning jobs. But do stay away from acetone because it's mind blowing how potent that solvent is>> it's actually too potent :D
Re: Cleaning G 10 scales?
I like Ballistol, too. Isopropyl alcohol and a toothbrush can also lift crud.
-Marc (pocketing an M4 Sage5 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: Cleaning G 10 scales?
I use Hornady One Shot gun cleaner/lube because it's what I usually have on the bench. I blast the whole knife and just wipe it down. Cleans my orange para 3 very well and that knife attracts gunk like crazy. I've also used isopropyl alcohol and it seems to work fine.
- Cambertree
- Member
- Posts: 1640
- Joined: Tue Sep 09, 2014 6:48 am
- Location: Victoria, Australia
Re: Cleaning G 10 scales?
Yeah, Ballistol all the way. Dish soap and a toothbrush first if they're very dirty.
Re: Cleaning G 10 scales?
let it patina.
-
- Member
- Posts: 18
- Joined: Tue Apr 09, 2019 5:14 pm
Re: Cleaning G 10 scales?
4 votes for Ballistol! I get into all kinds of crud with my work knife and all I have to do to keep it looking new is wipe it down a couple of times a week.
Re: Cleaning G 10 scales?
I agree with JD Spydo. Ballistol works great on G-10 scales in addition to a myriad of other things. I have been using the stuff for the last 8 years with no issues whatsoever. The bigger can of Ballistol will be the best value for you. A little goes a long way so you will have enough for your entire Spyderco collection as it grows (which it will).
- John
"Spyderco"...Vēnērunt, vīdērunt, vīcērunt
"Spyderco"...Vēnērunt, vīdērunt, vīcērunt
Re: Cleaning G 10 scales?
Ballistol seems to work well. I’ve wiped down G10 scales of new knives as they’ve arrived with it. I can’t say for certain but it seems to work as a barrier and makes consequent cleaning easier. :)
A day without laughter is a day wasted. ~ Charlie Chaplin
Re: Cleaning G 10 scales?
I use electrical parts cleaner on G10 all the time. Never tried carb or brake cleaner. I also use the electrical parts cleaner on frn too. Really gets the grease and grime out of the knife. It "dries" out the G10 but after a little handling it looks normal again. CRC lectra motive was my go to for awhile. Now I use wechem force 100. I'm sure any of them will work.
Also I've used spray on paint strippers and those strippers in a can for removing coatings from busse knives. It hasn't harmed the G10 or Micarta yet.
Also I've used spray on paint strippers and those strippers in a can for removing coatings from busse knives. It hasn't harmed the G10 or Micarta yet.
Re: Cleaning G 10 scales?
Hey "wrdwrght"? Do you use the 91% Isopropyl alcohol? I started using that to get off the worst of the accumulated grime and then finishing it up with BAllistol and have had really good results. I've found that by doing that in a two step method that it seems to do a more thorough job. I just started using the 91% Isopropyl rubbing alcohol about a year ago. In the past I used the 91% alcohol to remove stuff like glue off of scotch tape and other types of tape. Also I find the alcohol for internal cleaning without the worry of water getting trapped in moving part areas.
I'm glad you brought that up because I should have mentioned that myself. But I do find that the 91% Isopropyl alcohol does have a better overall result than the cheaper, weaker rubbing alcohol does.
But BALLISTOL also has ideal lubrication properties to it as well as a protection from minor corrosion.
Re: Cleaning G 10 scales?
Well just like "wrdwrght" just mentioned about the use of 91% Isopropyl alcohol ( rubbing alcohol you get at your local drug store) does get the worst of it removed so your Ballistol can work easier. Like I mentioned I found that the 91% Isopropyl works far quicker and far better than the weaker/cheaper versions do. I've found the 32 ounce size of the 91% Isopropyl alcohol to be really cheap on sales >> I just found a sale of two bottles for $3.99 at my local Walgreen drug store. And two bottles will usually last me a little over a year.Cryptohominid wrote: ↑Wed May 15, 2019 3:13 am4 votes for Ballistol! I get into all kinds of crud with my work knife and all I have to do to keep it looking new is wipe it down a couple of times a week.
A big 32 ounce can of Ballistol usually will last me 3 to 4 years most of the time. Using those two products for cleaning, restoring, lubricating and protecting are not only very effective but also inexpensive for the long haul as well.
Re: Cleaning G 10 scales?
Ballistol or Magic Eraser.
The only issue with my orange scales is how quickly and easily they get dirty or visibly show the dirt.
The only issue with my orange scales is how quickly and easily they get dirty or visibly show the dirt.
- RadioactiveSpyder
- Member
- Posts: 4524
- Joined: Sat Mar 30, 2013 9:48 pm
- Location: Lost in space
Re: Cleaning G 10 scales?
Another vote for the Mr. Clean Magic Eraser! Been using those for years and they work great, I just cut a small cube or two off the main block when I need to clean a set of G10 scales. I can typically get a year’s use out of one block of it.
It's better to be good than evil, but one achieves goodness at a terrific cost. ––– Stephen King