Swicks do those roles just fine :D
Spyderco and Murray Carter colab...
Re: Spyderco and Murray Carter colab...
I see they’re kitchen knives, so I needn’t press the neck knife any further. I will say a 10” professional chef’s knife with a wide blade and decent edge holding steel would be something I’d buy, as a professional. Just sayin’. :)
- best wishes, Jazz.
Re: Spyderco and Murray Carter colab...
Go to @cartercutlery on Instagram. 2 posts back you can see the entire set. Someone could screen grab those pics. I’m on my phone and it’s a pain or I’d do it.
Re: Spyderco and Murray Carter colab...
Here is your photo-goodness from twitter, any guesses on blade steel? (I zoomed in, but the resolution is too low to read the text on the blade.)
Last edited by Zatx on Mon Mar 04, 2019 6:54 am, edited 1 time in total.
- youmakemehole
- Member
- Posts: 227
- Joined: Wed Feb 06, 2019 1:42 am
Re: Spyderco and Murray Carter colab...
I hope the guys holding a bread knife!
"Sometimes I think that we're all little kids trying to act like grown ups, in our parents clothes. "
-sal
-sal
Re: Spyderco and Murray Carter colab...
Judging by the photos, there is some serious patina action going on there! I'd love to see these in LC200N; it would be nice to have a set of kitchen knives that would never rust.
- captnvegtble
- Member
- Posts: 1058
- Joined: Tue Oct 06, 2009 10:20 am
Re: Spyderco and Murray Carter colab...
omg... I have to have these. My favorite steel in a Spyderco kitchen knife!BelgiumRofls wrote: ↑Sun Mar 03, 2019 7:50 pmExciting.
An instagram user at IHHAS says the there are 410-clad Superblue and expected June-July.
Source: https://www.instagram.com/p/BukD785nfRw/
Re: Spyderco and Murray Carter colab...
Get outta here! I wonder what the price point will be...captnvegtble wrote: ↑Mon Mar 04, 2019 8:49 amomg... I have to have these. My favorite steel in a Spyderco kitchen knife!BelgiumRofls wrote: ↑Sun Mar 03, 2019 7:50 pmExciting.
An instagram user at IHHAS says the there are 410-clad Superblue and expected June-July.
Source: https://www.instagram.com/p/BukD785nfRw/
Re: Spyderco and Murray Carter colab...
These look like great kitchen knives, I just hope the pricing isn’t bonkers like most of their pricing has gone lately. I have a feeling these won’t be cheap.
Josh
Re: Spyderco and Murray Carter colab...
So excited for Spyderco kitchen knives.
I like these and would use them, but there is no way in heck that I am going to let my wife near them or give them as gifts. Carbon steel like Superblue would be rusty and trashed instantly in the hands of non knife people.
I really would like to see a full set with a block in LC200N. Don't forget the slots for the Galley V stones to be stored in the block. I'd probably buy one for me, my parents and the inlaws.
I like these and would use them, but there is no way in heck that I am going to let my wife near them or give them as gifts. Carbon steel like Superblue would be rusty and trashed instantly in the hands of non knife people.
I really would like to see a full set with a block in LC200N. Don't forget the slots for the Galley V stones to be stored in the block. I'd probably buy one for me, my parents and the inlaws.
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Spyderco and Murray Carter colab...
Well I'm less excited about kitchen knives. I'd still be interested in a Spyderco/Carter neck knife colab.
All SE all the time since 2017
~David
~David
Re: Spyderco and Murray Carter colab...
Mine still likes to put them in dishwasher despite repeatedly lecturing her not to.Sumdumguy wrote: ↑Mon Mar 04, 2019 10:49 amSo excited for Spyderco kitchen knives.
I like these and would use them, but there is no way in heck that I am going to let my wife near them or give them as gifts. Carbon steel like Superblue would be rusty and trashed instantly in the hands of non knife people.
I really would like to see a full set with a block in LC200N. Don't forget the slots for the Galley V stones to be stored in the block. I'd probably buy one for me, my parents and the inlaws.
Maybe I'll get them for myself and Spyderco could through in a nice carrying case I could hide them on her. She also used a chaparral 2 tip as screwdriver.
Re: Spyderco and Murray Carter colab...
It's not official till he grows a beard and shaves with that big sucker.
Re: Spyderco and Murray Carter colab...
Any pricing speculation? For that bad boy 9inch or so chef knife - $200?
Re: Spyderco and Murray Carter colab...
I was hoping for a spoon collab to go with the spoon shaving video. :)
Re: Spyderco and Murray Carter colab...
I actually swap out my kitchen knives when we have house guests. I can't imagine what I'd do if one of my good kitchen knives (I have a Phil Wilson and a Big Chris in there normally, as well as a TRC that I love) got run through the dishwasher.
- SpyderEdgeForever
- Member
- Posts: 6409
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Spyderco and Murray Carter colab...
I was hoping for Spyderco and Murray Carter to come up with a "Neck Knife Light Weight" that had FRN handle scales and laminated stainless steel blade in the 3.5 to 4 inch length
Re: Spyderco and Murray Carter colab...
^^^This.
I sure hope Eric and/or Sal see this and take your suggestion (if they haven't already designed such a product). Normally, knife blocks are a terrible thing as they are breeding grounds for bacteria, but with LC200N being so easy to keep clean it shouldn't be an issue. If they made this, it would cause me to buy nice kitchen knives for the first time in my life.
-
- Member
- Posts: 332
- Joined: Sun Feb 03, 2019 8:02 pm
Re: Spyderco and Murray Carter colab...
I'm looking forward to their kitchen gear!
It honestly makes so much sense for them to do a collaboration for the high end. I've never tried a spyderco kitchen knife now, but this is showing how dedicated they are on the matter. And they're so pretty! That lamination line makes me smile
And they really should be serious considering the fact that most people use knives in the kitchen way more than outside of it.
I'm going to look at their low end knives though. I could use a pairing and utility knife.
It honestly makes so much sense for them to do a collaboration for the high end. I've never tried a spyderco kitchen knife now, but this is showing how dedicated they are on the matter. And they're so pretty! That lamination line makes me smile
And they really should be serious considering the fact that most people use knives in the kitchen way more than outside of it.
I'm going to look at their low end knives though. I could use a pairing and utility knife.