Spyderco and Murray Carter colab...

Discuss Spyderco's products and history.
vivi
Member
Posts: 7425
Joined: Mon Oct 29, 2007 8:15 am

Re: Spyderco and Murray Carter colab...

Postby vivi » Sun Mar 03, 2019 8:05 pm

These collab knives look great from the pictures available so far!
Jazz wrote:
Sun Mar 03, 2019 1:59 pm
spyderg wrote:
Sun Mar 03, 2019 1:45 pm
What about a Swick?

No, I really want a more conventional knife that can comfortably whittle and cut an apple.
Swicks do those roles just fine :D
Current carry rotation:

Pacific Salt 2 LC200N | Manix XL M4 DLC | Aqua Salt

User avatar
Jazz
Member
Posts: 7663
Joined: Sun Jul 01, 2007 7:46 pm
Location: Alberta, Canada

Re: Spyderco and Murray Carter colab...

Postby Jazz » Sun Mar 03, 2019 8:50 pm

I see they’re kitchen knives, so I needn’t press the neck knife any further. I will say a 10” professional chef’s knife with a wide blade and decent edge holding steel would be something I’d buy, as a professional. Just sayin’. :)
- best wishes, Jazz.

User avatar
swigert
Member
Posts: 1865
Joined: Mon Oct 28, 2013 5:31 pm

Re: Spyderco and Murray Carter colab...

Postby swigert » Sun Mar 03, 2019 10:10 pm

Go to @cartercutlery on Instagram. 2 posts back you can see the entire set. Someone could screen grab those pics. I’m on my phone and it’s a pain or I’d do it.

User avatar
Zatx
Member
Posts: 711
Joined: Fri May 04, 2007 5:26 am

Re: Spyderco and Murray Carter colab...

Postby Zatx » Mon Mar 04, 2019 6:46 am

Here is your photo-goodness from twitter, any guesses on blade steel? (I zoomed in, but the resolution is too low to read the text on the blade.)

Image

Image

Image
Last edited by Zatx on Mon Mar 04, 2019 6:54 am, edited 1 time in total.

User avatar
youmakemehole
Member
Posts: 227
Joined: Wed Feb 06, 2019 1:42 am

Re: Spyderco and Murray Carter colab...

Postby youmakemehole » Mon Mar 04, 2019 6:52 am

I hope the guys holding a bread knife!
Attachments
Screen Shot 2019-03-04 at 4.51.09 AM.jpg
"Sometimes I think that we're all little kids trying to act like grown ups, in our parents clothes. ;) "

-sal

User avatar
swigert
Member
Posts: 1865
Joined: Mon Oct 28, 2013 5:31 pm

Re: Spyderco and Murray Carter colab...

Postby swigert » Mon Mar 04, 2019 8:02 am

Zatx wrote:
Mon Mar 04, 2019 6:46 am
Here is your photo-goodness from twitter, any guesses on blade steel? (I zoomed in, but the resolution is too low to read the text on the blade.)

Image

Image

Image
Steel is super blue clad in 410

User avatar
Zatx
Member
Posts: 711
Joined: Fri May 04, 2007 5:26 am

Re: Spyderco and Murray Carter colab...

Postby Zatx » Mon Mar 04, 2019 8:40 am

Judging by the photos, there is some serious patina action going on there! I'd love to see these in LC200N; it would be nice to have a set of kitchen knives that would never rust.

User avatar
captnvegtble
Member
Posts: 954
Joined: Tue Oct 06, 2009 10:20 am

Re: Spyderco and Murray Carter colab...

Postby captnvegtble » Mon Mar 04, 2019 8:49 am

BelgiumRofls wrote:
Sun Mar 03, 2019 7:50 pm
Exciting.
An instagram user at IHHAS says the there are 410-clad Superblue and expected June-July.

Source: https://www.instagram.com/p/BukD785nfRw/
omg... I have to have these. My favorite steel in a Spyderco kitchen knife!

User avatar
ejames13
Member
Posts: 380
Joined: Tue Jan 19, 2016 3:25 pm
Location: Vermont, USA

Re: Spyderco and Murray Carter colab...

Postby ejames13 » Mon Mar 04, 2019 10:18 am

captnvegtble wrote:
Mon Mar 04, 2019 8:49 am
BelgiumRofls wrote:
Sun Mar 03, 2019 7:50 pm
Exciting.
An instagram user at IHHAS says the there are 410-clad Superblue and expected June-July.

Source: https://www.instagram.com/p/BukD785nfRw/
omg... I have to have these. My favorite steel in a Spyderco kitchen knife!
Get outta here! I wonder what the price point will be...

murphjd25
Member
Posts: 2384
Joined: Fri Feb 05, 2016 12:43 am
Location: Bothell,WA

Re: Spyderco and Murray Carter colab...

Postby murphjd25 » Mon Mar 04, 2019 10:28 am

These look like great kitchen knives, I just hope the pricing isn’t bonkers like most of their pricing has gone lately. I have a feeling these won’t be cheap.
Josh

Sumdumguy
Member
Posts: 3159
Joined: Sun Dec 03, 2017 3:51 pm

Re: Spyderco and Murray Carter colab...

Postby Sumdumguy » Mon Mar 04, 2019 10:49 am

So excited for Spyderco kitchen knives.

I like these and would use them, but there is no way in heck that I am going to let my wife near them or give them as gifts. Carbon steel like Superblue would be rusty and trashed instantly in the hands of non knife people.

I really would like to see a full set with a block in LC200N. Don't forget the slots for the Galley V stones to be stored in the block. I'd probably buy one for me, my parents and the inlaws.

User avatar
Evil D
Member
Posts: 22170
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: Spyderco and Murray Carter colab...

Postby Evil D » Mon Mar 04, 2019 11:14 am

Well I'm less excited about kitchen knives. I'd still be interested in a Spyderco/Carter neck knife colab.
SHARPEN IT LIKE YOU LOVE IT, USE IT LIKE YOU HATE IT
~David

Slash
Member
Posts: 1276
Joined: Tue Feb 15, 2011 8:33 am
Location: SIN CITY

Re: Spyderco and Murray Carter colab...

Postby Slash » Mon Mar 04, 2019 11:24 am

Sumdumguy wrote:
Mon Mar 04, 2019 10:49 am
So excited for Spyderco kitchen knives.

I like these and would use them, but there is no way in heck that I am going to let my wife near them or give them as gifts. Carbon steel like Superblue would be rusty and trashed instantly in the hands of non knife people.

I really would like to see a full set with a block in LC200N. Don't forget the slots for the Galley V stones to be stored in the block. I'd probably buy one for me, my parents and the inlaws.
Mine still likes to put them in dishwasher despite repeatedly lecturing her not to.
Maybe I'll get them for myself and Spyderco could through in a nice carrying case I could hide them on her. She also used a chaparral 2 tip as screwdriver. 🤣

Slash
Member
Posts: 1276
Joined: Tue Feb 15, 2011 8:33 am
Location: SIN CITY

Re: Spyderco and Murray Carter colab...

Postby Slash » Mon Mar 04, 2019 11:28 am

It's not official till he grows a beard and shaves with that big sucker.

ZMW
Member
Posts: 521
Joined: Wed Dec 02, 2015 11:31 am

Re: Spyderco and Murray Carter colab...

Postby ZMW » Mon Mar 04, 2019 12:19 pm

Any pricing speculation? For that bad boy 9inch or so chef knife - $200?

TomAiello
Member
Posts: 4574
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Spyderco and Murray Carter colab...

Postby TomAiello » Mon Mar 04, 2019 1:36 pm

I was hoping for a spoon collab to go with the spoon shaving video. :)

TomAiello
Member
Posts: 4574
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Spyderco and Murray Carter colab...

Postby TomAiello » Mon Mar 04, 2019 1:38 pm

Slash wrote:
Mon Mar 04, 2019 11:24 am
Mine still likes to put them in dishwasher despite repeatedly lecturing her not to.
I actually swap out my kitchen knives when we have house guests. I can't imagine what I'd do if one of my good kitchen knives (I have a Phil Wilson and a Big Chris in there normally, as well as a TRC that I love) got run through the dishwasher.

User avatar
SpyderEdgeForever
Member
Posts: 6301
Joined: Mon Jul 23, 2012 6:53 pm
Location: USA

Re: Spyderco and Murray Carter colab...

Postby SpyderEdgeForever » Mon Mar 04, 2019 6:51 pm

I was hoping for Spyderco and Murray Carter to come up with a "Neck Knife Light Weight" that had FRN handle scales and laminated stainless steel blade in the 3.5 to 4 inch length :(

User avatar
Zatx
Member
Posts: 711
Joined: Fri May 04, 2007 5:26 am

Re: Spyderco and Murray Carter colab...

Postby Zatx » Tue Mar 05, 2019 5:41 am

Sumdumguy wrote:
Mon Mar 04, 2019 10:49 am

I really would like to see a full set with a block in LC200N. Don't forget the slots for the Galley V stones to be stored in the block. I'd probably buy one for me, my parents and the inlaws.
^^^This.

I sure hope Eric and/or Sal see this and take your suggestion (if they haven't already designed such a product). Normally, knife blocks are a terrible thing as they are breeding grounds for bacteria, but with LC200N being so easy to keep clean it shouldn't be an issue. If they made this, it would cause me to buy nice kitchen knives for the first time in my life.

Marulaghost
Member
Posts: 331
Joined: Sun Feb 03, 2019 8:02 pm

Re: Spyderco and Murray Carter colab...

Postby Marulaghost » Tue Mar 05, 2019 8:37 am

I'm looking forward to their kitchen gear!

It honestly makes so much sense for them to do a collaboration for the high end. I've never tried a spyderco kitchen knife now, but this is showing how dedicated they are on the matter. And they're so pretty! That lamination line makes me smile

And they really should be serious considering the fact that most people use knives in the kitchen way more than outside of it.

I'm going to look at their low end knives though. I could use a pairing and utility knife.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], Blnd, bruce91748, Google [Bot], jdw, Monty, sal and 69 guests