Custom scales pics.

Discuss Spyderco's products and history.
User avatar
ferider
Member
Posts: 812
Joined: Tue Dec 26, 2017 1:41 pm
Location: California
Contact:

Re: Custom scales pics.

#21

Post by ferider »

Sumdumguy wrote:
Tue Jan 01, 2019 5:07 pm
I want that mule on the far right so bad! How much arm twisting to take it off your hands? ;) what steel?

Seriously, those are pretty scales.
Thanks ! All 4 knives in the pic - including the two Mules - are Maxamet. The Ctek scales on the right were made by Chad Kelly. My "Show Mule". :)

Roland.
BobABQ
Member
Posts: 105
Joined: Tue Dec 11, 2018 7:48 pm

Re: Custom scales pics.

#22

Post by BobABQ »

Wartstein wrote:
Tue Jan 01, 2019 3:58 pm
BobABQ wrote:
Tue Jan 01, 2019 1:24 pm
TomAiello wrote:
Tue Jan 01, 2019 12:54 pm
I know Cuscadi has done dragonfly scales in the past. Have you asked them?
No, I have not. Is that his name here on the board?
Let me answer this: It's a German company that does pretty good custom-scales. I have an Endura with their micarta-, and a Millie with their wooden scales.
www.cuscadi.de
Sir, thank you very much!
User avatar
Wartstein
Member
Posts: 15044
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: Custom scales pics.

#23

Post by Wartstein »

BobABQ wrote:
Wed Jan 02, 2019 12:27 pm
Wartstein wrote:
Tue Jan 01, 2019 3:58 pm
BobABQ wrote:
Tue Jan 01, 2019 1:24 pm
TomAiello wrote:
Tue Jan 01, 2019 12:54 pm
I know Cuscadi has done dragonfly scales in the past. Have you asked them?
No, I have not. Is that his name here on the board?
Let me answer this: It's a German company that does pretty good custom-scales. I have an Endura with their micarta-, and a Millie with their wooden scales.
www.cuscadi.de
Sir, thank you very much!
You're welcome, my friend :)
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
User avatar
AlexRus
Member
Posts: 1128
Joined: Fri Jan 19, 2018 10:42 am

Re: Custom scales pics.

#24

Post by AlexRus »

BTG wrote:
Tue Jan 01, 2019 11:32 pm
53C619FB-7FF5-4EDE-BE2E-6EB47DB791E4.jpegAAE2D257-8627-427D-A1B6-24A65A23251E.jpeg53C619FB-7FF5-4EDE-BE2E-6EB47DB791E4.jpeg
Awesome!
Especially the bottom Para 3, with the chaotic carbon fiber scales! 🔥🔥🔥
User avatar
Xplorer
Member
Posts: 1344
Joined: Sat Apr 18, 2015 11:41 pm

Re: Custom scales pics.

#25

Post by Xplorer »

ferider wrote:
Wed Jan 02, 2019 9:24 am
Sumdumguy wrote:
Tue Jan 01, 2019 5:07 pm
I want that mule on the far right so bad! How much arm twisting to take it off your hands? ;) what steel?

Seriously, those are pretty scales.
Thanks ! All 4 knives in the pic - including the two Mules - are Maxamet. The Ctek scales on the right were made by Chad Kelly. My "Show Mule". :)

Roland.
Well that was fun for me :) :) ..I opened the thread wanting to see some cool scales and I was very pleasantly surprised to see one of mine. :D Plus, a nice compliment on top of that. What a great way to start my day! :D Thanks for including my work in your picture Roland.

I love that Cruwear Manix! The Cruwear Manix is one of my favorite Sydercos to carry as it is, and those scales really make it a premium carry option. Very Nice!

Happy New Year!

Chad
:spyder: Spyderco fan and collector since 1991. :spyder:
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
Doeswhateveraspidercan
Member
Posts: 2618
Joined: Tue Jul 10, 2018 6:31 pm

Re: Custom scales pics.

#26

Post by Doeswhateveraspidercan »

Xplorer wrote:
Wed Jan 02, 2019 12:46 pm
ferider wrote:
Wed Jan 02, 2019 9:24 am
Sumdumguy wrote:
Tue Jan 01, 2019 5:07 pm
I want that mule on the far right so bad! How much arm twisting to take it off your hands? ;) what steel?

Seriously, those are pretty scales.
Thanks ! All 4 knives in the pic - including the two Mules - are Maxamet. The Ctek scales on the right were made by Chad Kelly. My "Show Mule". :)

Roland.
Well that was fun for me :) :) ..I opened the thread wanting to see some cool scales and I was very pleasantly surprised to see one of mine. :D Plus, a nice compliment on top of that. What a great way to start my day! :D Thanks for including my work in your picture Roland.

I love that Cruwear Manix! The Cruwear Manix is one of my favorite Sydercos to carry as it is, and those scales really make it a premium carry option. Very Nice!

Happy New Year!

Chad
Which one was your work?
User avatar
Xplorer
Member
Posts: 1344
Joined: Sat Apr 18, 2015 11:41 pm

Re: Custom scales pics.

#27

Post by Xplorer »

The Maxamet Mule with the Ctek and G10 scales on the right.
:spyder: Spyderco fan and collector since 1991. :spyder:
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
Doeswhateveraspidercan
Member
Posts: 2618
Joined: Tue Jul 10, 2018 6:31 pm

Re: Custom scales pics.

#28

Post by Doeswhateveraspidercan »

Oh now that is very nice!
User avatar
ferider
Member
Posts: 812
Joined: Tue Dec 26, 2017 1:41 pm
Location: California
Contact:

Re: Custom scales pics.

#29

Post by ferider »

Xplorer wrote:
Wed Jan 02, 2019 1:00 pm
The Maxamet Mule with the Ctek and G10 scales on the right.
Happy new year, Chad !
User avatar
Pelagic
Member
Posts: 2440
Joined: Fri Apr 27, 2018 5:49 pm
Location: East Coast/Nomadic

Re: Custom scales pics.

#30

Post by Pelagic »

Does anyone know of a company that makes fully metal scales for the pm2 (like flytanium) that allow for tip DOWN carry?
Pancake wrote:
Wed Aug 14, 2019 10:20 pm
Are you a magician? :eek:
Nate wrote:
Thu Apr 04, 2019 4:32 pm
You're the lone wolf of truth howling into the winds of ignorance
Doeswhateveraspidercan wrote:
Sat Jun 15, 2019 9:17 pm
You are a nobody got it?
User avatar
Forest Green
Member
Posts: 116
Joined: Wed Mar 28, 2018 4:04 am

Re: Custom scales pics.

#31

Post by Forest Green »

Suingab@gmail made these, using Bob Lums makers mark as the characters.
Attachments
Tribute to Bob Lum
Tribute to Bob Lum
User avatar
ferider
Member
Posts: 812
Joined: Tue Dec 26, 2017 1:41 pm
Location: California
Contact:

Re: Custom scales pics.

#32

Post by ferider »

Pelagic wrote:
Thu Jan 03, 2019 12:47 pm
Does anyone know of a company that makes fully metal scales for the pm2 (like flytanium) that allow for tip DOWN carry?
My favorite alu scales are from https://appliedweaponstech.com/products ... 2-grip-kit, they allow tip down as well.

You can buy ti/brass/copper scales directly from Flytanium and ask them to tap tip-down holes for no additional charge.

Roland.
User avatar
Pelagic
Member
Posts: 2440
Joined: Fri Apr 27, 2018 5:49 pm
Location: East Coast/Nomadic

Re: Custom scales pics.

#33

Post by Pelagic »

ferider wrote:
Thu Jan 03, 2019 5:59 pm
Pelagic wrote:
Thu Jan 03, 2019 12:47 pm
Does anyone know of a company that makes fully metal scales for the pm2 (like flytanium) that allow for tip DOWN carry?
My favorite alu scales are from https://appliedweaponstech.com/products ... 2-grip-kit, they allow tip down as well.

You can buy ti/brass/copper scales directly from Flytanium and ask them to tap tip-down holes for no additional charge.

Roland.
Thank you! I like tip up in many models but for the pm2 it's just abysmal for me (ergonomics).
Pancake wrote:
Wed Aug 14, 2019 10:20 pm
Are you a magician? :eek:
Nate wrote:
Thu Apr 04, 2019 4:32 pm
You're the lone wolf of truth howling into the winds of ignorance
Doeswhateveraspidercan wrote:
Sat Jun 15, 2019 9:17 pm
You are a nobody got it?
Sumdumguy
Member
Posts: 3601
Joined: Sun Dec 03, 2017 3:51 pm

Re: Custom scales pics.

#34

Post by Sumdumguy »

Xplorer wrote:
Wed Jan 02, 2019 12:46 pm
ferider wrote:
Wed Jan 02, 2019 9:24 am
Sumdumguy wrote:
Tue Jan 01, 2019 5:07 pm
I want that mule on the far right so bad! How much arm twisting to take it off your hands? ;) what steel?

Seriously, those are pretty scales.
Thanks ! All 4 knives in the pic - including the two Mules - are Maxamet. The Ctek scales on the right were made by Chad Kelly. My "Show Mule". :)

Roland.
Well that was fun for me :) :) ..I opened the thread wanting to see some cool scales and I was very pleasantly surprised to see one of mine. :D Plus, a nice compliment on top of that. What a great way to start my day! :D Thanks for including my work in your picture Roland.

I love that Cruwear Manix! The Cruwear Manix is one of my favorite Sydercos to carry as it is, and those scales really make it a premium carry option. Very Nice!

Happy New Year!

Chad
Now, if only you would make me a set we would all have a merry Christmas!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."

-Thomas Jefferson
User avatar
Xplorer
Member
Posts: 1344
Joined: Sat Apr 18, 2015 11:41 pm

Re: Custom scales pics.

#35

Post by Xplorer »

Sumdumguy wrote:
Fri Jan 04, 2019 9:48 pm
Now, if only you would make me a set we would all have a merry Christmas!
:D Thank you for the kind words. I hope your Christmas was merry :) .
:spyder: Spyderco fan and collector since 1991. :spyder:
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
User avatar
AlexRus
Member
Posts: 1128
Joined: Fri Jan 19, 2018 10:42 am

Re: Custom scales pics.

#36

Post by AlexRus »

Thinking of custom marbled carbon fiber scales for one of my Millies
🤔
User avatar
AlexRus
Member
Posts: 1128
Joined: Fri Jan 19, 2018 10:42 am

Re: Custom scales pics.

#37

Post by AlexRus »

Spyderco Paramilitary 2 M390, black and blue carbon fiber textured scales, black powder coated titanium deep carry clip, titanium blue anodized hardware and lanyard plug

Image

Image
Last edited by AlexRus on Tue Aug 13, 2019 10:57 pm, edited 1 time in total.
User avatar
ZrowsN1s
Member
Posts: 7326
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: Custom scales pics.

#38

Post by ZrowsN1s »

^looks good 👍
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
User avatar
bearfacedkiller
Member
Posts: 11411
Joined: Sat Jan 04, 2014 1:22 pm
Location: hiding in the woods...

Re: Custom scales pics.

#39

Post by bearfacedkiller »

Image
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
User avatar
AlexRus
Member
Posts: 1128
Joined: Fri Jan 19, 2018 10:42 am

Re: Custom scales pics.

#40

Post by AlexRus »

ZrowsN1s wrote:
Thu Aug 08, 2019 2:53 pm
^looks good 👍
Thanks!
Post Reply