Hey Sal, any updates on the PM2 & Para3 maxamet?
-
- Member
- Posts: 74
- Joined: Sat Oct 14, 2017 10:39 pm
Hey Sal, any updates on the PM2 & Para3 maxamet?
Hey Sal, I was wondering if there is any info you are able to share about when the PM2 in maxamet might be back and when the Para 3 in maxamet may appear? I am just kinda curious about maybe sooner, later, or if the magic eight ball says the future is hazy for some reason. I am loving all the cool new models that have been announced but have really been itching for these.
Thx!
Thx!
- bearfacedkiller
- Member
- Posts: 11420
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
I am curious about the Military as well? :)
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
-
- Member
- Posts: 1559
- Joined: Sun Oct 11, 2015 5:36 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Really looking forward to this one for a while. An update would be great
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
-
- Member
- Posts: 74
- Joined: Sat Oct 14, 2017 10:39 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
:) fingers crossed
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Weren‘t there a few PM2 with slightly off center blade tips? Spyderco wanted to look into this?
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
It’s odd that Travvy looks to have a Para 3 Maxamet in hand almost two weeks ago and they’re still no where to be found.
-
- Member
- Posts: 74
- Joined: Sat Oct 14, 2017 10:39 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Intriguing model for maxamet as well.
-
- Member
- Posts: 1559
- Joined: Sun Oct 11, 2015 5:36 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
I don't think cs does pre-orders and their site has the ad to cart option so it seems to be in stock. I emailed last night to confirm with no reply yet. They also have the atr 2
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
-
- Member
- Posts: 1559
- Joined: Sun Oct 11, 2015 5:36 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
No more add to cart button..
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
-
- Member
- Posts: 17
- Joined: Thu Mar 18, 2010 1:05 am
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
I managed to snag a PM2 a while ago but it had the uneven ground/bent tip issue and so I returned it. I really liked the dark gray G10 and the stonewashed finish though. Hopefully Sal and Co get the issue sorted out and they're available soon again. I too really want a Military in the same configuration.
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
New around here so I apologize if this has been covered but what issues have there been with the Maxamet steel? Contacted a dealer about the PM2 and they said probably not until the summer due to figuring out a few problems.
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Hi Camhabib,
Welcome to our forum.
Maximet is a very challenging steel to turn into a blade. Fallout is high and we need to think it through more carefully before resuming.
sal
Welcome to our forum.
Maximet is a very challenging steel to turn into a blade. Fallout is high and we need to think it through more carefully before resuming.
sal
- Deadboxhero
- Member
- Posts: 2180
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Thanks for pushing the limits on knife steels and making them available for us to play with. If it wasn't for your effort I don't think I would have fallen so deeply down the rabbit hole.
Thanks, hope to see more Maxamet soon. I let the PM2 slip through my fingers because I thought it would be around. Guess we all took it for granted, but the effort didn't go unnoticed. My mind was blown by how long that steel cuts.
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Long time lurker, first time poster. Spyderco's are my go to folders for EDC or hanging out on my work bench. I usually have about 6 in my rotation at any given time. Although I buy and sell from time to time I generally favor the Manix or Paramilitary 2 line. I've been wanting to add a Para 3 to the rotation and have been holding out for the Maxamet version. Based on this comment Sal, are you able to say approximately when you expect the Para 3 in Maxamet to hit the market.
BTW, Great forum here. It is great that the owner/company directly supports the discussions.
-
- Member
- Posts: 1559
- Joined: Sun Oct 11, 2015 5:36 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
It's shipping to stores now. Cutleryshoppe had some but have sold out. As of writing this they are in stock heretjsblade wrote: ↑Tue Mar 20, 2018 3:09 pmLong time lurker, first time poster. Spyderco's are my go to folders for EDC or hanging out on my work bench. I usually have about 6 in my rotation at any given time. Although I buy and sell from time to time I generally favor the Manix or Paramilitary 2 line. I've been wanting to add a Para 3 to the rotation and have been holding out for the Maxamet version. Based on this comment Sal, are you able to say approximately when you expect the Para 3 in Maxamet to hit the market.
BTW, Great forum here. It is great that the owner/company directly supports the discussions.
https://www.osograndeknives.com/catalog ... 29474.html
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Thanks for the heads up koenig.
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
Has anyone received one yet from one of the vendors.koenigsegg wrote: ↑Tue Mar 20, 2018 3:14 pmIt's shipping to stores now. Cutleryshoppe had some but have sold out. As of writing this they are in stock heretjsblade wrote: ↑Tue Mar 20, 2018 3:09 pmLong time lurker, first time poster. Spyderco's are my go to folders for EDC or hanging out on my work bench. I usually have about 6 in my rotation at any given time. Although I buy and sell from time to time I generally favor the Manix or Paramilitary 2 line. I've been wanting to add a Para 3 to the rotation and have been holding out for the Maxamet version. Based on this comment Sal, are you able to say approximately when you expect the Para 3 in Maxamet to hit the market.
BTW, Great forum here. It is great that the owner/company directly supports the discussions.
https://www.osograndeknives.com/catalog ... 29474.html
-
- Member
- Posts: 1559
- Joined: Sun Oct 11, 2015 5:36 pm
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
I don't have it but it's been shipped.tjsblade wrote: ↑Tue Mar 20, 2018 6:37 pmHas anyone received one yet from one of the vendors.koenigsegg wrote: ↑Tue Mar 20, 2018 3:14 pmIt's shipping to stores now. Cutleryshoppe had some but have sold out. As of writing this they are in stock heretjsblade wrote: ↑Tue Mar 20, 2018 3:09 pmLong time lurker, first time poster. Spyderco's are my go to folders for EDC or hanging out on my work bench. I usually have about 6 in my rotation at any given time. Although I buy and sell from time to time I generally favor the Manix or Paramilitary 2 line. I've been wanting to add a Para 3 to the rotation and have been holding out for the Maxamet version. Based on this comment Sal, are you able to say approximately when you expect the Para 3 in Maxamet to hit the market.
BTW, Great forum here. It is great that the owner/company directly supports the discussions.
https://www.osograndeknives.com/catalog ... 29474.html
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
I placed an order earlier through Osogrande but the confirmation email said it is pre order only.
I wish the site would tell you this prior to placing the order. Oh well.
I wish the site would tell you this prior to placing the order. Oh well.
Re: Hey Sal, any updates on the PM2 & Para3 maxamet?
From the link you posted?koenigsegg wrote: ↑Tue Mar 20, 2018 6:39 pmI don't have it but it's been shipped.tjsblade wrote: ↑Tue Mar 20, 2018 6:37 pmHas anyone received one yet from one of the vendors.koenigsegg wrote: ↑Tue Mar 20, 2018 3:14 pmIt's shipping to stores now. Cutleryshoppe had some but have sold out. As of writing this they are in stock heretjsblade wrote: ↑Tue Mar 20, 2018 3:09 pm
Long time lurker, first time poster. Spyderco's are my go to folders for EDC or hanging out on my work bench. I usually have about 6 in my rotation at any given time. Although I buy and sell from time to time I generally favor the Manix or Paramilitary 2 line. I've been wanting to add a Para 3 to the rotation and have been holding out for the Maxamet version. Based on this comment Sal, are you able to say approximately when you expect the Para 3 in Maxamet to hit the market.
BTW, Great forum here. It is great that the owner/company directly supports the discussions.
https://www.osograndeknives.com/catalog ... 29474.html