You need the Bayou Shooter Endurance, that thing is awesome! I'm looking forward to the Stretch, myself.levs18 wrote:I’m hoping we can get a bunch of support for an Emerson endura. I think that model has been deserving of a steel upgrade for quite a while. I would like to add to my collection...ThePeacent wrote:another vote for more Emersons +1
Hawkbills/Reverse S in this steel look interesting too
VTOKU Sprint Run
- BrianMcCord
- Member
- Posts: 491
- Joined: Fri Nov 27, 2015 12:29 pm
- Location: Upstate NY USA
Re: VTOKU Sprint Run
-Brian
Son's Collection: H1 Rescue Manbug, Tenacious
Rescue 79mm Orange, Cat BD-1, Effecient, Pingo Orange FRN, T-Mag, Urban K390, Lil' Native, Sliverax, Para 3 S110V, Caly 3 HAP 40, R Nishijin, Mantra, Manix 2 LW S110V, Manix 2 Black, Delica 4 Black, PM2 Digi, PM2 Black, Yojimbo 2, Native 5 LW, Dragonfly 2, Military 204P, Wolfspyder, Techno, HAP 40 Ladybug, H1 Hawkbill Ladybug, Blue Persistence, Bradley 2, UKPK SE Gin-1
Looking for an Operation Iraqi Freedom and Operation Enduring Freedom Native. :spyder:
Son's Collection: H1 Rescue Manbug, Tenacious
Rescue 79mm Orange, Cat BD-1, Effecient, Pingo Orange FRN, T-Mag, Urban K390, Lil' Native, Sliverax, Para 3 S110V, Caly 3 HAP 40, R Nishijin, Mantra, Manix 2 LW S110V, Manix 2 Black, Delica 4 Black, PM2 Digi, PM2 Black, Yojimbo 2, Native 5 LW, Dragonfly 2, Military 204P, Wolfspyder, Techno, HAP 40 Ladybug, H1 Hawkbill Ladybug, Blue Persistence, Bradley 2, UKPK SE Gin-1
Looking for an Operation Iraqi Freedom and Operation Enduring Freedom Native. :spyder:
-
- Member
- Posts: 2847
- Joined: Sat Jun 11, 2016 12:45 am
- Location: Barcelona, Spain
Re: VTOKU Sprint Run
those are really pretty knives right there.levs18 wrote:I’m hoping we can get a bunch of support for an Emerson endura. I think that model has been deserving of a steel upgrade for quite a while. I would like to add to my collection...ThePeacent wrote:another vote for more Emersons +1
Hawkbills/Reverse S in this steel look interesting too
Excellent trio!! :rolleyes:
Re: VTOKU Sprint Run
Now that I've calmed down a little and realized I can't buy every knife that Syderco is putting out in 2018 (I do get exited) :D I'm in for a Hawkbill Dragonfly, Emerson Delica, and Lil Matriarch.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-
- Member
- Posts: 58
- Joined: Thu Nov 23, 2017 11:22 am
Re: VTOKU Sprint Run
Any ideas when these sprints are coming out ? I missed out on the super blue and certainly don’t want to miss out getting an endura in this sprint !
Re: VTOKU Sprint Run
Best place to check is the "delivered and upcoming" releases thread. But not sure yet, other than sometime in '2018'.Mastermachetier wrote:Any ideas when these sprints are coming out ? I missed out on the super blue and certainly don’t want to miss out getting an endura in this sprint !
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: VTOKU Sprint Run
Over the years my Emerson Endura has probably had more pocket time than anything in my rotation other than the Caly3. So thin, light, and fast out of the pocket with the Emerson opener and the FRN texture. It's also a bit of a study in compromise, with the saber grind giving it a strong piercing tip and thick Emerson wave hook, but really hurting the slicing ability for EDC tasks. Now that the Police 4 is dominating my rotation, I may finally try to re-profile the old VG-10 Endura Wave to a bit more of a slicer.
Having said all that (and knowing that this thread is pretty old), an Emerson Endura in a carbon steel would be a no-brainer for me.
Having said all that (and knowing that this thread is pretty old), an Emerson Endura in a carbon steel would be a no-brainer for me.
- SpeedHoles
- Member
- Posts: 2725
- Joined: Thu Jan 15, 2015 11:53 am
- Location: Mitten
Re: VTOKU Sprint Run
Intrigued.
I'd definitely like to see more options for the Lil Matriarch!
I'd definitely like to see more options for the Lil Matriarch!
Going back to Caly.
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: VTOKU Sprint Run
PE Lil Matriarch would have me giddy.
A waved Delica would be cool.
Is there still a mold for an frn Cricket? I carry a Cricket from time to time.
I know folks want another Jester.
A PE Dragonhawk would also be appealing.
If we are talking about non frn then sign me up for a G10 R model.
A waved Delica would be cool.
Is there still a mold for an frn Cricket? I carry a Cricket from time to time.
I know folks want another Jester.
A PE Dragonhawk would also be appealing.
If we are talking about non frn then sign me up for a G10 R model.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: VTOKU Sprint Run
bearfacedkiller wrote:PE Lil Matriarch would have me giddy.
A waved Delica would be cool.
Is there still a mold for an frn Cricket? I carry a Cricket from time to time.
I know folks want another Jester.
A PE Dragonhawk would also be appealing.
If we are talking about non frn then sign me up for a G10 R model.
Absolutely want to see a Jester in this and future Sprint runs...and back in standard production (with FRN...maybe VG-10, ZDP, and H1 FS Salt?!?)! PLEASE make this happen Sal!
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: VTOKU Sprint Run
+1 more for a Jester and the obvious PE Lil Matriarch.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
Re: VTOKU Sprint Run
Why no hype for the Stretch here?
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: VTOKU Sprint Run
I think we are assuming the Stretch will be included and are just naming other models we want as well.
I am in for a Stretch and a Delica like usual. :)
I am in for a Stretch and a Delica like usual. :)
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- SpeedHoles
- Member
- Posts: 2725
- Joined: Thu Jan 15, 2015 11:53 am
- Location: Mitten
Re: VTOKU Sprint Run
Wanimator wrote:Why no hype for the Stretch here?
I think the Stretch 2 is already confirmed for the run, and of course, would be one of the models I would personally purchase!
Maybe it's sounding like other blade variations of the usual suspects are up for a possible run, like maybe there will be excess blade steel left...? So people are throwing out ideas for that possibility.
Along with the Lil Matriarch, all the mention of the Jester has me voting for that as well. I just bumped an old Jester Sprint thread, so anyone interested please chime in there as well! :spyder:
Going back to Caly.
- SpeedHoles
- Member
- Posts: 2725
- Joined: Thu Jan 15, 2015 11:53 am
- Location: Mitten
Re: VTOKU Sprint Run
bearfacedkiller wrote:I think we are assuming the Stretch will be included and are just naming other models we want as well.
I am in for a Stretch and a Delica like usual. :)
Yep, same here!
Going back to Caly.
- ConspicuousConsumption
- Member
- Posts: 167
- Joined: Wed Jun 14, 2017 5:47 pm
Re: VTOKU Sprint Run
I already made my Stretch pre-order on KC
The first time I saw a Spyderco was the early 90s at a knife shop in a mall. I can still see the SpydieHoles through that glass display cabinet. My parents wouldn't buy any of them for me... so now I buy them all. :spyder:
Re: VTOKU Sprint Run
I'd like a Vtoku Cricket or something else I could use like an Xacto cutting for my art.
-
- Member
- Posts: 58
- Joined: Thu Nov 23, 2017 11:22 am
Re: VTOKU Sprint Run
Guys how do you think this VTOKU will compare to the super blue sprint.
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: VTOKU Sprint Run
I think most will find it very similar to super blue. They are not exactly the same but considering the broad spectrum of steels available today they are more similar than different.
I think that for those who missed out on the Super Blue sprints this should be very exciting.
I think that for those who missed out on the Super Blue sprints this should be very exciting.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
-
- Member
- Posts: 58
- Joined: Thu Nov 23, 2017 11:22 am
Re: VTOKU Sprint Run
Color me excited for this sprint run then. Still kicking myself for missing a chance of getting a super blue endura.
-
- Member
- Posts: 361
- Joined: Sat Jul 25, 2015 9:35 pm
- Location: New Zealand
Re: VTOKU Sprint Run
KC still have their hap40 pakawood enduraMastermachetier wrote:Any ideas when these sprints are coming out ? I missed out on the super blue and certainly don’t want to miss out getting an endura in this sprint !