Police4 FRN ETA
Police4 FRN ETA
I'm really excited for this knife and wondering what the ETA might be. Anyone else? I didn't see it in the 2018 Product Guide so I'm hoping it makes it in the 2018 Mid Year Supplement.
I've tried the Police 4 G10, but found the full steel liners are a bit sharp and make the knife unbalanced (handle heavy), which a FRN version would improve. A lower price would also be more attractive than the G10 version. The Dragonfly and Stretch FRN prices are 57-58% of the G10 prices, so the Police 4 FRN could have a MSRP and MAP of approximately $170 and $110 compared to $290 and $190 for the G10 version.
Finally, as a lefty whose favorite knife happens to be the Military, I consider the Police 4 a Military Left Hand with the addition of a super steel, a better blade-handle ratio (73% vs. 80%), and slicing performance (3.7 mm vs. 3.0 mm blade). A Military Left Hand sprint?...finally!
I've tried the Police 4 G10, but found the full steel liners are a bit sharp and make the knife unbalanced (handle heavy), which a FRN version would improve. A lower price would also be more attractive than the G10 version. The Dragonfly and Stretch FRN prices are 57-58% of the G10 prices, so the Police 4 FRN could have a MSRP and MAP of approximately $170 and $110 compared to $290 and $190 for the G10 version.
Finally, as a lefty whose favorite knife happens to be the Military, I consider the Police 4 a Military Left Hand with the addition of a super steel, a better blade-handle ratio (73% vs. 80%), and slicing performance (3.7 mm vs. 3.0 mm blade). A Military Left Hand sprint?...finally!
Matt
C07 Police 4 | FRN K390
C41 Native 5 | Never Summer/NFFF
C94 UK Penknife | BD1N
C07 Police 4 | FRN K390
C41 Native 5 | Never Summer/NFFF
C94 UK Penknife | BD1N
Re: Police4 FRN ETA
Hi Mosteen,
I'm with you on the reasons. I really like my FRN pieces.
However, we are just beginning the project and I would guess you and I will have to be patient. Designing, engineering prototyping, tooling must be made, samples made and refined, production prototype approved, schedule for production, actual production, QC in Seki, shipping, QC in Golden....I think you get the idea. Probably a year to delivery.
sal
I'm with you on the reasons. I really like my FRN pieces.
However, we are just beginning the project and I would guess you and I will have to be patient. Designing, engineering prototyping, tooling must be made, samples made and refined, production prototype approved, schedule for production, actual production, QC in Seki, shipping, QC in Golden....I think you get the idea. Probably a year to delivery.
sal
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Police4 FRN ETA
I am also eager to see this one happen. I am however quite patient and can wait. I would love to know what color it will be and what steel it will come out in.
I am hoping that they stick with K390 and I think that dark blue is fitting seeing as how it is called the Police. :)
I am hoping that they stick with K390 and I think that dark blue is fitting seeing as how it is called the Police. :)
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
-
- Member
- Posts: 12638
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Police4 FRN ETA
I love g10. Reckon I better get one rather sooner than later.
Re: Police4 FRN ETA
I am a big fan of the Police line and I really hope that a lightweight FRN version gets off the ground.
Personally, I would like to see the FRN version in a stainless steel, s90v or s110v perhaps. I would also prefer that the handle shape of the FRN version kept the slightly better defined shape of the Police 3 handle. The Police 3 has more defined finger groves/contours that I prefer, such pleasant lines...
Personally, I would like to see the FRN version in a stainless steel, s90v or s110v perhaps. I would also prefer that the handle shape of the FRN version kept the slightly better defined shape of the Police 3 handle. The Police 3 has more defined finger groves/contours that I prefer, such pleasant lines...
Re: Police4 FRN ETA
Always wanted a S110V Endura in Midnight Blue FRN.
A S110V Police 4 in Midnight Blue FRN would be awesome.
G10 makes a good work knife, but FRN is better for EDC.
A S110V Police 4 in Midnight Blue FRN would be awesome.
G10 makes a good work knife, but FRN is better for EDC.
Re: Police4 FRN ETA
Thanks for the info Sal. It's a tough call deciding which release I'm more excited for....FRN Police or the return of the Spyderhawk. Both have been dream releases for years. Thank you for making them both reality. I know they'll be worth the wait!sal wrote:Hi Mosteen,
I'm with you on the reasons. I really like my FRN pieces.
However, we are just beginning the project and I would guess you and I will have to be patient. Designing, engineering prototyping, tooling must be made, samples made and refined, production prototype approved, schedule for production, actual production, QC in Seki, shipping, QC in Golden....I think you get the idea. Probably a year to delivery.
sal
Re: Police4 FRN ETA
Will be well worth the wait, very happy with my Police 4 but prefer FRN on practically any Spydie..
Re: Police4 FRN ETA
Agree on the S110V Endura and Police 4!shunsui wrote:Always wanted a S110V Endura in Midnight Blue FRN.
A S110V Police 4 in Midnight Blue FRN would be awesome.
G10 makes a good work knife, but FRN is better for EDC.
David
Re: Police4 FRN ETA
I've never been a big FRN nut, but I think y'all might be onto something here. The Police 4 is a nice knife, and more variations of it are welcome, especially if they can be had for less. I like the dark blue FRN idea. (Still waiting for a nice navy blue G10 sometime.) I'd like to see some nice stainless steel at some point, but K390 is fine. I'd take one in S30V, seeing as that is a possibility now that Seki is using it. I'd take one in VG10 too.
I'm glad it will take a while, seeing as I spent a good deal this year on Spydies.
I'm glad it will take a while, seeing as I spent a good deal this year on Spydies.
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: Police4 FRN ETA
Never had a police and I actually really like FRN, so i'll be grabbing one of these for sure!!
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
-
- Member
- Posts: 2847
- Joined: Sat Jun 11, 2016 12:45 am
- Location: Barcelona, Spain
Re: Police4 FRN ETA
I'm in love with the idea of a "budget Police", as after 4 iterations it's still too highly priced for my knife-spending budget, but I've always wanted one of the "Classic" designs and this one it's the most appealing to me due to shape, blade length and thinness
Good things are worth waiting for!!
Good things are worth waiting for!!
Re: Police4 FRN ETA
VG-10 or CTS BD1.
Re: Police4 FRN ETA
Really hoping the steel stays the same. At this point I'll pretty much buy whatever they put out in K390.
Re: Police4 FRN ETA
What about a 3.5 or so mini Police, Sal ? FRN and K390. Many of us can’t or won’t carry a 4.4 Inch blade !sal wrote:Hi Mosteen,
I'm with you on the reasons. I really like my FRN pieces.
However, we are just beginning the project and I would guess you and I will have to be patient. Designing, engineering prototyping, tooling must be made, samples made and refined, production prototype approved, schedule for production, actual production, QC in Seki, shipping, QC in Golden....I think you get the idea. Probably a year to delivery.
sal
Marius
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: Police4 FRN ETA
The dark blue FRN seems like a perfect combination for a POLICE model. Currently I couldn't be more pleased with the G-10 version, but will surely pick up an FRN as well when they hit the shelves. This would truly be a landmark occasion for Spyderco.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
Re: Police4 FRN ETA
Hi Steelcity,
Welcome to our forum.
sal
Welcome to our forum.
sal
Re: Police4 FRN ETA
Looking for that, it might be worth considering an Endura. It's not a perfect mini Police clone, but it sits in that spot pretty well.elena86 wrote:What about a 3.5 or so mini Police, Sal ? FRN and K390. Many of us can’t or won’t carry a 4.4 Inch blade !sal wrote:Hi Mosteen,
I'm with you on the reasons. I really like my FRN pieces.
However, we are just beginning the project and I would guess you and I will have to be patient. Designing, engineering prototyping, tooling must be made, samples made and refined, production prototype approved, schedule for production, actual production, QC in Seki, shipping, QC in Golden....I think you get the idea. Probably a year to delivery.
sal
Re: Police4 FRN ETA
@sal thanks for the update. Well darn :rolleyes:, I might have to hold on to the G10 version while I wait.sal wrote:Hi Mosteen,
I'm with you on the reasons. I really like my FRN pieces.
However, we are just beginning the project and I would guess you and I will have to be patient. Designing, engineering prototyping, tooling must be made, samples made and refined, production prototype approved, schedule for production, actual production, QC in Seki, shipping, QC in Golden....I think you get the idea. Probably a year to delivery.
sal
@bearfacedkiller I'd also like to know what the steel and handle color will be. I'm more interested in what the steel will be and hope that it's K390 or another low Cr steel that will develop character (patina) with use. Some of the suggestions in Sal's Exotic Japanese steels topic would also be nice, especially a Japanese version of CPM M4 like Hitachi's XVC11.bearfacedkiller wrote:I am also eager to see this one happen. I am however quite patient and can wait. I would love to know what color it will be and what steel it will come out in.
I am hoping that they stick with K390 and I think that dark blue is fitting seeing as how it is called the Police. :)
I'd be happy with black FRN, which in addition to the dark blue suggestions would fit the model name, but I'm personally a fan of foliage green.
Matt
C07 Police 4 | FRN K390
C41 Native 5 | Never Summer/NFFF
C94 UK Penknife | BD1N
C07 Police 4 | FRN K390
C41 Native 5 | Never Summer/NFFF
C94 UK Penknife | BD1N