Doc Dan wrote:I would love to see more Elmax, but I do think cost is an issue. As SG88 said, a lw Manix or Native in this steel might do well. I would love to see an Urban LW in this steel, personally.
British blades forum urban lw Elmax was made. I had one it was awesome.
I know, and they refused to sell me one, so I refused to participate any longer on the forum.
That's interesting, I was able to pick up one of the K390 Pingos with no issues.
The Pingo was from Edge Matters, not British Blades.
I got my BB Elmax Urban used, so I didn't have to deal with trans-Atlantic forum politics on that one
On the subject of Elmax, I really like it so far, but only have the BB Urban, Ti Pingo and Ti Squeak, so can't comment on its properties in larger heavier duty blades.
awa54 wrote:
On the subject of Elmax, I really like it so far, but only have the BB Urban, Ti Pingo and Ti Squeak, so can't comment on its properties in larger heavier duty blades.
That's where I think it fits in, I have a fixed blade in Elmax, and that thing takes a beating and a half, and stays significantly sharper, longer. I love the steel.
Doc Dan wrote:I would love to see more Elmax, but I do think cost is an issue. As SG88 said, a lw Manix or Native in this steel might do well. I would love to see an Urban LW in this steel, personally.
British blades forum urban lw Elmax was made. I had one it was awesome.
I know, and they refused to sell me one, so I refused to participate any longer on the forum.
That's interesting, I was able to pick up one of the K390 Pingos with no issues.
Yeah, some people did get them. However, I got a nasty sounding note from that guy saying he would under no circumstances sell any more of the knives out of his country. I appealed, and got a blunt no. That is too bad, too. I would have loved to have that knife. Right knife, right steel, right color.
I would love to see more Elmax from Spyderco, it is definitely one of my favorite stainless steels. I find it to be a fantastic combination of corrosion resistance, toughness & edge retention while being able to hold a screaming sharp edge.
Few years ago one well known steelnut said that Elmax is what S30V supposed to be, so I will be very interested to try. N5 LW looks like a great platform for Elmax and sprint :)
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
I agree. That would make a great combo. (besides, Elmax is simply a cool name for a steel, like Maxamet is)
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
I'd bite on a LW - love to try Spyderco's Elmax. All of my Elmax experience has been from ZT. The two knives that have the most use are my beater 0560 and 0801. At this point I've reprofiled both and touch ups on the Sharpmaker are consistently easy. That said, I'm not sure I like it more than some of the other steel options already available. Patiently waiting for the Maxamet PM2!
I would have to agree with many here in a positive light for Elmax. My primary Elmax steel knife is the Lionspy (The Big One) and it performs amazingly. I have found it to be also highly corrosive resistant. I would be great to see it more offerings.
bh49 wrote:Few years ago one well known steelnut said that Elmax is what S30V supposed to be, so I will be very interested to try. N5 LW looks like a great platform for Elmax and sprint :)
Ooh! Foliage green FRN and Elmax, 100% chance I'd buy that!
Last edited by awa54 on Wed Jul 12, 2017 7:34 pm, edited 1 time in total.
I would be very interested in something in Elmax. UKPK, Manix2 lw, or Native 5 lw would all work for me. I've never had anything in Elmax and would love to try it
bh49 wrote:Few years ago one well known steelnut said that Elmax is what S30V supposed to be, so I will be very interested to try. N5 LW looks like a great platform for Elmax and sprint :)
Ooh! Foliage green FRN and Elmax, 100% chance I'd buy that!
This in the Manix 2 platform would be great! Not that a Native wouldn't be awesome as well, but I'd prefer something just a tad bigger.
It’s the only stainless steel that sharpens and behaves like a carbon steel from my experience. Native or Pingo aside I would buy any spydie in Elmax. I would probably have to sell a kidney to get a Millie in Elmax. I hope and pray for a PM2 rerun or a Para3 sprint or even exclusive. I was idiot enough not to get an exclusive BBS PM2
Marius
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore ) Proud member of the old school spyderedge nation
There doesn't seem to be a lot of options with Elmax. Is this due mainly to cost? Anyone have a rough guess as to what an Elmax Military would even cost?
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
bh49 wrote:Few years ago one well known steelnut said that Elmax is what S30V supposed to be, so I will be very interested to try. N5 LW looks like a great platform for Elmax and sprint :)
Ooh! Foliage green FRN and Elmax, 100% chance I'd buy that!
This in the Manix 2 platform would be great! Not that a Native wouldn't be awesome as well, but I'd prefer something just a tad bigger.
I hope we see some Elmax in 2019! As people said, the Military, Para 3, Native LW, and Manix LW all sound great! One of the few steels left I really want to try out.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!