Fully serrated PM2 comming soon

Discuss Spyderco's products and history.
User avatar
ZrowsN1s
Member
Posts: 7325
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Fully serrated PM2 comming soon

#1

Post by ZrowsN1s »

Hello fellow forum dwellers. I was just looking at Blade HQ's "Comming Soon" section, and noticed that an s30V pm2 with FULL serrations is on the list. yay. Lot of nice knives comming out next year, I'm already doing budget math to figure out how many I can buy when they actually drop, otherwise you pay through the nose on the secondary market. So far I've got my eye on the all black karahawk, and the Hap 40 caly3, and a few other maybe's.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
User avatar
Tyrdle
Member
Posts: 152
Joined: Tue Dec 29, 2015 8:32 am
Location: MD
Contact:

Re: Fully serrated PM2 comming soon

#2

Post by Tyrdle »

Yep, I'm really looking forward to the Advocate and Rhino!
:spyder: Turtles can have knives too, right? :spyder:
Aus-8 Delica 1 ATS-55 Endura UK Penknife
Positron Mamba Blurple PM2
twinboysdad
Member
Posts: 3715
Joined: Tue Mar 26, 2013 6:23 pm

Re: Fully serrated PM2 comming soon

#3

Post by twinboysdad »

All y'all that begged for this better step up! Lots of other SE models are counting on you
JD Spydo
Member
Posts: 23532
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Fully serrated PM2 comming soon

#4

Post by JD Spydo »

That's great news and I'm glad to hear it. My boss's son is a huge fan of the PM 2 and I plan on telling him about it tonight. But I won't be anywhere near content until they also do the C-36 Military in Spyderedge as well. And I don't even care if they dig out some old 440V ( S60V) bar stock to do them with. Because 440V is a great Spyderedged steel anyway. But the C-36 Military is truly a crocodile of a knife in Spyderedge.

But I'm really glad to hear this for all you PM 2 fans and I know my boss's son is going to want one really bad.
Zen
Member
Posts: 33
Joined: Sun Nov 27, 2016 7:52 pm

Re: Fully serrated PM2 comming soon

#5

Post by Zen »

Edit: Got it totaly wrong :o sry
Last edited by Zen on Wed Dec 28, 2016 5:25 pm, edited 1 time in total.
Studey
Member
Posts: 579
Joined: Tue Oct 12, 2010 10:54 pm
Location: Indiana

Re: Fully serrated PM2 comming soon

#6

Post by Studey »

Zen wrote:Are there any plans on the PM2 as plain edge or spyderedge? This would be realy nice. Especially with the edge lengh it is complete legal in germany to carry.
What? We're discussing the PM2 Spyderedge that's coming out.
Zen
Member
Posts: 33
Joined: Sun Nov 27, 2016 7:52 pm

Re: Fully serrated PM2 comming soon

#7

Post by Zen »

Ah sorry I ment - if half serrated and plain edge is planned.
User avatar
J32A2
Member
Posts: 397
Joined: Sat Dec 09, 2006 7:04 pm
Location: Arizona

Re: Fully serrated PM2 comming soon

#8

Post by J32A2 »

Forum members don't let forum members do combo edges.
User avatar
Halfneck
Member
Posts: 2000
Joined: Fri Dec 23, 2005 8:51 am
Location: Calhoun, Georgia.

Re: Fully serrated PM2 comming soon

#9

Post by Halfneck »

Been hoping they do the SE PM2. Had an original SE ParaMilitary, but the 2 version's ergonomics are way better in my hand.
zhyla
Member
Posts: 2190
Joined: Tue Apr 20, 2010 2:12 pm

Re: Fully serrated PM2 comming soon

#10

Post by zhyla »

Whoa... unlike most knife hoarders I've never owned a PM2. This pretty much pushes me over the edge.
osprey
Member
Posts: 108
Joined: Tue Mar 24, 2015 3:41 pm
Location: Portland, ME, USA

Re: Fully serrated PM2 comming soon

#11

Post by osprey »

This is on my list for sure, but it would jump to the top if it wasn't S30V. Perhaps someday there will be a FRN PM2 SE in BD1 - that would make an excellent 'beater' that I wouldn't be opposed to using for dirty work.
zhyla
Member
Posts: 2190
Joined: Tue Apr 20, 2010 2:12 pm

Re: Fully serrated PM2 comming soon

#12

Post by zhyla »

BD1 is a fine budget steel, but why that over S30v?
User avatar
ZrowsN1s
Member
Posts: 7325
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: Fully serrated PM2 comming soon

#13

Post by ZrowsN1s »

J32A2 wrote:Forum members don't let forum members do combo edges.
That made me laugh. I'd usually agree, but I just saw that sweet red and black LC200N Native 5...
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL :bug-red

"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
osprey
Member
Posts: 108
Joined: Tue Mar 24, 2015 3:41 pm
Location: Portland, ME, USA

Re: Fully serrated PM2 comming soon

#14

Post by osprey »

zhyla wrote:BD1 is a fine budget steel, but why that over S30v?
Cost and ease of sharpening
zhyla
Member
Posts: 2190
Joined: Tue Apr 20, 2010 2:12 pm

Re: Fully serrated PM2 comming soon

#15

Post by zhyla »

osprey wrote:
zhyla wrote:BD1 is a fine budget steel, but why that over S30v?
Cost and ease of sharpening
I don't think you'll need to sharpen it very often :)
Bill1170
Member
Posts: 2770
Joined: Tue Oct 20, 2009 7:34 pm
Location: San Diego North County

Re: Fully serrated PM2 comming soon

#16

Post by Bill1170 »

Do we know how LC200N fares in Spyderedge? A Golden-made PM2 Salt in SE would be fantastic.
WCC
Member
Posts: 149
Joined: Wed Aug 05, 2015 2:19 am

Re: Fully serrated PM2 comming soon

#17

Post by WCC »

Another must-have and I am truely thankful that Sal decided to give in to out constant nagging! :-)
BTG
Member
Posts: 1004
Joined: Sat Jan 03, 2015 2:14 pm
Location: Norcal

Re: Fully serrated PM2 comming soon

#18

Post by BTG »

Don't know if it's been mentioned, but was just looking at spydiewiki....and it's showing 2 PM2 Sprints to be released in 2017....both with 52100 steel...1 plainedge...1 serrated....
Zen
Member
Posts: 33
Joined: Sun Nov 27, 2016 7:52 pm

Re: Fully serrated PM2 comming soon

#19

Post by Zen »

BTG wrote:Don't know if it's been mentioned, but was just looking at spydiewiki....and it's showing 2 PM2 Sprints to be released in 2017....both with 52100 steel...1 plainedge...1 serrated....
Very intresting. I am trying to find more infos about the 52100 steel right now. How is it compared to H1? What a pricerange will a such a sprintrun have?
User avatar
Joris Mo
Member
Posts: 1099
Joined: Wed Jun 01, 2011 6:51 am
Location: Amsterdam, NL.

Re: Fully serrated PM2 comming soon

#20

Post by Joris Mo »

osprey wrote:This is on my list for sure, but it would jump to the top if it wasn't S30V. Perhaps someday there will be a FRN PM2 SE in BD1 - that would make an excellent 'beater' that I wouldn't be opposed to using for dirty work.
That would make for a great beater knife! Would love some more FRN versions anyway.

A SE 52100 sounds very interesting as well! Has there ever been a Spydie edged non stainless blade before?

I'll take a Cruwear FRN SE Military as well! :D
(preferably as production run so people will actually use them as the great beaters they'd be..)
Post Reply