Autonomy 2

Discussion of Restricted Models by Spyderco. READ RULES PRIOR TO POSTING!
TomAiello
Member
Posts: 3443
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Autonomy 2

Postby TomAiello » Mon Oct 29, 2018 8:06 am

Does anyone know if there is an ETA for this one?

I searched but found nothing really useful.

User avatar
TazKristi
Member
Posts: 2944
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

Re: Autonomy 2

Postby TazKristi » Mon Oct 29, 2018 9:09 am

TomAiello wrote:
Mon Oct 29, 2018 8:06 am
Does anyone know if there is an ETA for this one?

I searched but found nothing really useful.
Hi, Tom:
We don't have a current ETA but I would anticipate the release within the next month or so. I've moved your thread into our restricted models area since the Autonomy 2 is a restricted item.

Kristi
There is nothing more important than this one day.

TomAiello
Member
Posts: 3443
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Autonomy 2

Postby TomAiello » Mon Oct 29, 2018 2:43 pm

Thanks Kristi, and my apologies for posting in the wrong forum.

User avatar
TazKristi
Member
Posts: 2944
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

Re: Autonomy 2

Postby TazKristi » Mon Oct 29, 2018 3:59 pm

TomAiello wrote:
Mon Oct 29, 2018 2:43 pm
Thanks Kristi, and my apologies for posting in the wrong forum.
Hey, Tom:
No apologies needed. I have some good news though, I received an update today and the Autonomy 2 will start shipping out this week. :)

Thanks much for your interest!

Kristi
There is nothing more important than this one day.

TomAiello
Member
Posts: 3443
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Autonomy 2

Postby TomAiello » Tue Oct 30, 2018 7:57 am

Thanks Kristi!

I'll keep rechecking my favorite retailers. I want to logo one and give it to one of my employees as a gift.

User avatar
Kels73
Member
Posts: 100
Joined: Fri Jun 21, 2013 10:23 pm
Location: Florida

Re: Autonomy 2

Postby Kels73 » Fri Nov 02, 2018 7:22 pm

Oh, yes!!!

ABX2011
Member
Posts: 1694
Joined: Thu Oct 01, 2009 7:54 pm

Re: Autonomy 2

Postby ABX2011 » Mon Nov 12, 2018 9:36 am

Interesting that this uses LC200N steel. The knife isn't considered a "salt" though so I guess the other components are not highly rust resistant like on the Caribbean and Native 5 Salt.

Accutronman
Member
Posts: 95
Joined: Fri Mar 09, 2018 7:44 am

Re: Autonomy 2

Postby Accutronman » Mon Nov 12, 2018 3:50 pm

TazKristi wrote:
Mon Oct 29, 2018 3:59 pm
TomAiello wrote:
Mon Oct 29, 2018 2:43 pm
Thanks Kristi, and my apologies for posting in the wrong forum.
Hey, Tom:
No apologies needed. I have some good news though, I received an update today and the Autonomy 2 will start shipping out this week. :)

Thanks much for your interest!

Kristi
Kristi,

Has shipping started? Thanks!

User avatar
The Deacon
Member
Posts: 24979
Joined: Fri Sep 24, 2004 10:33 am
Location: Upstate SC, USA
Contact:

Re: Autonomy 2

Postby The Deacon » Tue Nov 13, 2018 8:05 am

ABX2011 wrote:
Mon Nov 12, 2018 9:36 am
Interesting that this uses LC200N steel. The knife isn't considered a "salt" though so I guess the other components are not highly rust resistant like on the Caribbean and Native 5 Salt.

Guess that's one way of looking at it. Personally, I'd be more inclined to think Spyderco would be using the same materials for the hardware on the Autonomy 2 that they use on the Autonomy which, while not not a "Salt Series" knife either, was made specifically for the US Coast Guard.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!

ABX2011
Member
Posts: 1694
Joined: Thu Oct 01, 2009 7:54 pm

Re: Autonomy 2

Postby ABX2011 » Wed Nov 14, 2018 7:59 am

The Deacon wrote:
Tue Nov 13, 2018 8:05 am
ABX2011 wrote:
Mon Nov 12, 2018 9:36 am
Interesting that this uses LC200N steel. The knife isn't considered a "salt" though so I guess the other components are not highly rust resistant like on the Caribbean and Native 5 Salt.

Guess that's one way of looking at it. Personally, I'd be more inclined to think Spyderco would be using the same materials for the hardware on the Autonomy 2 that they use on the Autonomy which, while not not a "Salt Series" knife either, was made specifically for the US Coast Guard.
Ok, so it sounds like it is a "salt" for all intents and purposes...

User avatar
Popsickle
Member
Posts: 1596
Joined: Sat Mar 05, 2011 2:35 pm

Re: Autonomy 2

Postby Popsickle » Sat Nov 17, 2018 10:39 pm

ABX2011 wrote:
Wed Nov 14, 2018 7:59 am
The Deacon wrote:
Tue Nov 13, 2018 8:05 am
ABX2011 wrote:
Mon Nov 12, 2018 9:36 am
Interesting that this uses LC200N steel. The knife isn't considered a "salt" though so I guess the other components are not highly rust resistant like on the Caribbean and Native 5 Salt.

Guess that's one way of looking at it. Personally, I'd be more inclined to think Spyderco would be using the same materials for the hardware on the Autonomy 2 that they use on the Autonomy which, while not not a "Salt Series" knife either, was made specifically for the US Coast Guard.
Ok, so it sounds like it is a "salt" for all intents and purposes...
Are this for sale yet?

User avatar
jtoler_9
Member
Posts: 898
Joined: Thu Jul 28, 2011 10:38 am
Location: Utah

Re: Autonomy 2

Postby jtoler_9 » Wed Nov 21, 2018 9:35 am

They are up at gpk

User avatar
holeshot
Member
Posts: 916
Joined: Sun Jan 31, 2016 10:40 am
Location: San Francisco

Re: Autonomy 2

Postby holeshot » Wed Nov 21, 2018 4:20 pm

Just got shipment notice from BHQ. :)
"No matter where you go, there you are"

User avatar
Popsickle
Member
Posts: 1596
Joined: Sat Mar 05, 2011 2:35 pm

Re: Autonomy 2

Postby Popsickle » Sat Nov 24, 2018 9:50 pm

jtoler_9 wrote:
Wed Nov 21, 2018 9:35 am
They are up at gpk
Are these in stock anywhere else?

TomAiello
Member
Posts: 3443
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Autonomy 2

Postby TomAiello » Sun Nov 25, 2018 12:26 am

Popsickle wrote:
Sat Nov 24, 2018 9:50 pm
jtoler_9 wrote:
Wed Nov 21, 2018 9:35 am
They are up at gpk
Are these in stock anywhere else?
BHQ still had them a couple days ago.

User avatar
Popsickle
Member
Posts: 1596
Joined: Sat Mar 05, 2011 2:35 pm

Re: Autonomy 2

Postby Popsickle » Sun Nov 25, 2018 12:30 am

TomAiello wrote:
Sun Nov 25, 2018 12:26 am
Popsickle wrote:
Sat Nov 24, 2018 9:50 pm
jtoler_9 wrote:
Wed Nov 21, 2018 9:35 am
They are up at gpk
Are these in stock anywhere else?
BHQ still had them a couple days ago.
Unfortunately out of stock. I hope to have one before christmas

User avatar
Popsickle
Member
Posts: 1596
Joined: Sat Mar 05, 2011 2:35 pm

Re: Autonomy 2

Postby Popsickle » Mon Nov 26, 2018 12:39 am

TazKristi wrote:
Mon Oct 29, 2018 3:59 pm
TomAiello wrote:
Mon Oct 29, 2018 2:43 pm
Thanks Kristi, and my apologies for posting in the wrong forum.
Hey, Tom:
No apologies needed. I have some good news though, I received an update today and the Autonomy 2 will start shipping out this week. :)

Thanks much for your interest!

Kristi
Hi Kristi,

Will there be an orange version of the Autonomy 2?

User avatar
TazKristi
Member
Posts: 2944
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

Re: Autonomy 2

Postby TazKristi » Mon Nov 26, 2018 11:15 am

Hi, Popsickle:
Not that I'm aware of, but we never say never. ;)

Kristi
There is nothing more important than this one day.

User avatar
Popsickle
Member
Posts: 1596
Joined: Sat Mar 05, 2011 2:35 pm

Re: Autonomy 2

Postby Popsickle » Mon Nov 26, 2018 2:34 pm

TazKristi wrote:
Mon Nov 26, 2018 11:15 am
Hi, Popsickle:
Not that I'm aware of, but we never say never. ;)

Kristi
well, if there is.... ill have to get a second one! I ordered one at a retailer that is "backordered". Hopefully they get their inventory soon.

User avatar
Crux
Member
Posts: 1304
Joined: Tue Apr 24, 2018 9:29 pm
Location: North Carolina USA

Re: Autonomy 2

Postby Crux » Sat Dec 15, 2018 3:20 pm

The Autonomy 2 appears to have the exact same profile of the Mule but maybe 3/8" longer. I lined then up and it was spot on.
Can you find it and can it cut? :eek:


Return to “Spyderco Restricted Models Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest