Mammoth Molars?
Mammoth Molars?
This is an odd question but is there a reason that there are so many customized knives that use fossilized mammoth molars for part of the scales? I understand that they are interesting but have they found THAT many fossilized mammoths? Is it an unregulated trade? It has just kind of left me befuddled??
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: Mammoth Molars?
I'd guess that, like many things, it's a combination of factors. Unregulated trade is probably one of them. Like the ivory trade, the sale of modern elephant teeth might be prohibited or heavily regulated. Bonus factor would be that it's less likely than ivory to arouse the ire of the animal rights mafia. The fact that it can be cut into slabs and the way it looks when dyed probably also enter into the equation. Some folks like scales that are visually interesting. Porosity may also be a factor, all I've ever seen has been stabilized. Might also be easier to work with than stone.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
Re: Mammoth Molars?
I think it started as a substitute for (largely banned) ivory. But I've seen some really beautiful work with mammoth molar.
If we're lucky, Xplorer will post his work in this thread. :)
If we're lucky, Xplorer will post his work in this thread. :)
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Mammoth Molars?
There sure are lot of Elephants still being poached. "A" doesn't necessarily equal "B", but ?
Are the Russians Canadians, & Nordic States really sitting on that amount of mammoth bones & fossil teeth?
Are the Russians Canadians, & Nordic States really sitting on that amount of mammoth bones & fossil teeth?
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Mammoth Molars?
I honestly have no idea. I just know that you can buy mammoth for scales, but at reasonably high prices.
https://www.makermaterialsupply.com/sea ... &q=mammoth
You only see it on high end customs, so I don't know how much is really being used. And a mammoth is a big animal, so I imagine that a relatively small number of mammoth skeletons would yield a fairly large amount of material, relative to the global demand for mammoth knife scales.
Re: Mammoth Molars?
You and I can only grow two sets of teeth. Mammoths were good for six sets of teeth, so it's not rare (relatively speaking) to find teeth without the rest of the animal to go with it. Mammoth teeth are also popular for handgun grips.
Re: Mammoth Molars?
Interesting reading I found via google: https://www.fossilera.com/pages/about-mammoth-molars
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Mammoth Molars?
I guess due to melting permafrost there is just a bunch of mammoth bits coming available. Way more than I would have expected.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
- Doc Dan
- Member
- Posts: 14811
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Mammoth Molars?
Fossilized ivory of any kind is treated legally differently than regular ivory. The same is most likely true of mammoth teeth. It looks pretty good, to me. I wonder if we could get a Ladybug from Spyderco with this? Or a Manbug with bolsters?
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Mammoth Molars?
Santa Fe stoneworks does Spyderco knives in mammoth molar.
Re: Mammoth Molars?
I don't have any more to add about how rare it is or isn't than what's already been shared above.
It's definitely expensive. The pieces of mammoth tooth I used on the knife pictured below were $80.00. That's a ton for a material that isn't made into a handle yet. Lots of complete knives cost less than $80.00.
Because it's fossilized, it's a pain to work with even though it's stabilized. The layers you see that create the visually interesting pattern are dramatically different in density. This leads to easily fracturing the scales along those lines of separation and also creates problems with deflection when drilling. Some of the layers are hard like quartz and some are nearly as soft as stabilized wood. Epoxying the material to a liner for support and using carbide bits are a couple of the precautionary steps needed to work with this material.
For me it's a special material that deserves to be treated with respect. I'm extremely careful to protect the material during the process. I bought these 2 pieces of mammoth tooth 2 years before I was finally ready to make a knife I considered "worthy" of the handle material. I feel like it's an honor to be able to carry this ancient artifact as a functional part of my knife. It's my favorite knife in my collection and will finally be going on it's first wilderness trip in 2 weeks. (to the John Muir Wilderness out of Mammoth Lakes)
It's definitely expensive. The pieces of mammoth tooth I used on the knife pictured below were $80.00. That's a ton for a material that isn't made into a handle yet. Lots of complete knives cost less than $80.00.
Because it's fossilized, it's a pain to work with even though it's stabilized. The layers you see that create the visually interesting pattern are dramatically different in density. This leads to easily fracturing the scales along those lines of separation and also creates problems with deflection when drilling. Some of the layers are hard like quartz and some are nearly as soft as stabilized wood. Epoxying the material to a liner for support and using carbide bits are a couple of the precautionary steps needed to work with this material.
For me it's a special material that deserves to be treated with respect. I'm extremely careful to protect the material during the process. I bought these 2 pieces of mammoth tooth 2 years before I was finally ready to make a knife I considered "worthy" of the handle material. I feel like it's an honor to be able to carry this ancient artifact as a functional part of my knife. It's my favorite knife in my collection and will finally be going on it's first wilderness trip in 2 weeks. (to the John Muir Wilderness out of Mammoth Lakes)
Last edited by Xplorer on Sat Jul 31, 2021 1:37 am, edited 1 time in total.
:spyder: Spyderco fan and collector since 1991. :spyder:
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
- ChrisinHove
- Member
- Posts: 4071
- Joined: Tue Dec 17, 2013 8:12 am
- Location: 27.2046° N, 77.4977° E
Re: Mammoth Molars?
This scales are absolutely stunning! I wouldn’t touch Ivory without being 100% sure of its provenance but there is no issue here.