Yeah buddy! It is a Purdy little thing :D
...still have yet to get my Blue Bone Toothpick, but this Red Bone seems very hard to beat :)
Yeah buddy! It is a Purdy little thing :D
Nice Atom! Other than Spyderco, TRMs are my most carried lately! I got a set of custom monkeywood scales for my Neutron recently, and have an Atlas slip joint on the way! Great company, great knives! :)
bearfacedkiller wrote: ↑Fri May 29, 2020 6:07 amI’ve got more than a few hours on a 455 Rancher. Husky saws are great.
[img]https://i.imgur.com/awsefL6.jpg
MacLaren wrote: ↑Fri May 29, 2020 6:33 amI much, much, prefer Husqvarna over Stihl
I've got a 562XP and a big Jonsered 2094
Love me some Husky :D
And, Save Edge files for sharpening :)
[img]https://i.postimg.cc/tTmc8SMJ/20200529-083226.jpg
MacLaren, those XP and Jonsered 2094s are both cool saws. Is yours the turbo? Thanks for the tip on the files. I couldn't justify dropping the coin on a pro grade saw for my uses-- at least this time. I know the Ranchers are a great workhorse, if no hot rod.bearfacedkiller wrote: ↑Fri May 29, 2020 7:09 amI’ve got a stihl ms250 that i like. It is light and powerful enough. The huskies do seem a little easier to start. We got a small huskie climbing saw recently. I’ll seenif I can get a pic. It’s awesome! It has a twelve inch bar and weighs 10 pounds.
[img]https://i.imgur.com/3qUgYjX.jpg
No worries good buddyEnactive wrote: ↑Sat May 30, 2020 1:49 pmbearfacedkiller wrote: ↑Fri May 29, 2020 6:07 amI’ve got more than a few hours on a 455 Rancher. Husky saws are great.
[img]https://i.imgur.com/awsefL6.jpgMacLaren wrote: ↑Fri May 29, 2020 6:33 amI much, much, prefer Husqvarna over Stihl
I've got a 562XP and a big Jonsered 2094
Love me some Husky :D
And, Save Edge files for sharpening :)
[img]https://i.postimg.cc/tTmc8SMJ/20200529-083226.jpgMacLaren, those XP and Jonsered 2094s are both cool saws. Is yours the turbo? Thanks for the tip on the files. I couldn't justify dropping the coin on a pro grade saw for my uses-- at least this time. I know the Ranchers are a great workhorse, if no hot rod.bearfacedkiller wrote: ↑Fri May 29, 2020 7:09 amI’ve got a stihl ms250 that i like. It is light and powerful enough. The huskies do seem a little easier to start. We got a small huskie climbing saw recently. I’ll seenif I can get a pic. It’s awesome! It has a twelve inch bar and weighs 10 pounds.
[img]https://i.imgur.com/3qUgYjX.jpg
I haven't run chainsaws too much, but i have used both Stihl and Husqvarna saws and have to say that they are both darn good. I have memories of my dad's POS Homelite-- the chainsaw of my childhood. It musta been a late '70s model and it did not like to start even with a fresh spark plug.
The Jonsereds sound pretty good. https://youtu.be/BJWIu4X_Pbw
https://youtu.be/qTJob-Me-SE making some skinny cookies...
and for the truly mental... https://youtu.be/dsiP-blQslI
while we're talking about good engine sounds Mazda rotary racing engines anyone?... https://youtu.be/OjwwV20iZYE
Okay, sorry not sorry, everyone for the off topic off topic ramblings. Maybe we'll revive or start a new chainsaw thread.
Thanks. Indeed-- 110 inches of rain a year and plenty of sunshine make for lots of growth.Woodpuppy wrote: ↑Fri May 29, 2020 4:58 amNice! Looks like a lovely place; looks like it needs the green beaten back often too! I’ve got the 450 Rancher. Been very pleased with performance with my Husqavarna tools; I never put ethanol blended fuels in them, only stabilized marine gas or the premix stuff off the shelf in the hardware store. I’m surprised they can stock and sell that inside? Anyway, great tools. They always start.
When I say that big Jonsered is hard to start I mean your having to pull a 200 pound compression saw....lol....it's tough!Enactive wrote: ↑Sat May 30, 2020 3:48 pmThanks. Indeed-- 110 inches of rain a year and plenty of sunshine make for lots of growth.Woodpuppy wrote: ↑Fri May 29, 2020 4:58 amNice! Looks like a lovely place; looks like it needs the green beaten back often too! I’ve got the 450 Rancher. Been very pleased with performance with my Husqavarna tools; I never put ethanol blended fuels in them, only stabilized marine gas or the premix stuff off the shelf in the hardware store. I’m surprised they can stock and sell that inside? Anyway, great tools. They always start.
Husqvarna makes good machines for sure and they're generally easy to start too.
That sounds burly.MacLaren wrote: ↑Sat May 30, 2020 4:26 pmWhen I say that big Jonsered is hard to start I mean your having to pull a 200 pound compression saw....lol....it's tough!Enactive wrote: ↑Sat May 30, 2020 3:48 pmThanks. Indeed-- 110 inches of rain a year and plenty of sunshine make for lots of growth.Woodpuppy wrote: ↑Fri May 29, 2020 4:58 amNice! Looks like a lovely place; looks like it needs the green beaten back often too! I’ve got the 450 Rancher. Been very pleased with performance with my Husqavarna tools; I never put ethanol blended fuels in them, only stabilized marine gas or the premix stuff off the shelf in the hardware store. I’m surprised they can stock and sell that inside? Anyway, great tools. They always start.
Husqvarna makes good machines for sure and they're generally easy to start too.
I would much rather start a Rancher or 562 :D
She is VERY hard to crank.Enactive wrote: ↑Sat May 30, 2020 5:55 pmThat sounds burly.MacLaren wrote: ↑Sat May 30, 2020 4:26 pmWhen I say that big Jonsered is hard to start I mean your having to pull a 200 pound compression saw....lol....it's tough!Enactive wrote: ↑Sat May 30, 2020 3:48 pmThanks. Indeed-- 110 inches of rain a year and plenty of sunshine make for lots of growth.Woodpuppy wrote: ↑Fri May 29, 2020 4:58 amNice! Looks like a lovely place; looks like it needs the green beaten back often too! I’ve got the 450 Rancher. Been very pleased with performance with my Husqavarna tools; I never put ethanol blended fuels in them, only stabilized marine gas or the premix stuff off the shelf in the hardware store. I’m surprised they can stock and sell that inside? Anyway, great tools. They always start.
Husqvarna makes good machines for sure and they're generally easy to start too.
I would much rather start a Rancher or 562 :D
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Dude, that's awesome!!bearfacedkiller wrote: ↑Sun May 31, 2020 11:14 amThis is the new toy. A little climbing saw with a 12 inch blade. Man this thing is handy!
Thank you Rick!TkoK83Spy wrote: ↑Sun May 31, 2020 5:28 pmLooks like some nice property you have there Paul! That's something my wife and I want in the future once the kid is off on her own (only 8 years old right now). We live in a small neighborhood of around 50 houses and she has lots of little friends, but man...we would LOVE a large, private backyard.
Looks quite nice.JustinB wrote: ↑Sun May 31, 2020 11:56 amCarrying my John Lloyd swayback. I've been on something of a slipjoint tear lately, they are really hard to beat :D
[img] https://i.ibb.co/HNNv70c/0-E723654-428- ... 2-D285.jpg
Thanks Enactive!Enactive wrote: ↑Sun May 31, 2020 7:19 pmLooks quite nice.JustinB wrote: ↑Sun May 31, 2020 11:56 amCarrying my John Lloyd swayback. I've been on something of a slipjoint tear lately, they are really hard to beat :D
[img] https://i.ibb.co/HNNv70c/0-E723654-428- ... 2-D285.jpg