Just had a little brainstorm, or maybe a brainfart, only time and the opinions of other spydie junkies will tell which it is. From what I've read here and elsewhere, many of us like the solid feel of a stainless steel handle, but wish it was less slippery. While filing my nails a few minutes ago I took a good look at the file I was using. Little piece of steel with diamond dust bonded to it. You know the kind, can buy them in any drug store or super market. Now that stuff is grippy as all get out, but not so agressive as to rip your hands apart.
So...... what if Spyderco coated the flats of a stainless steel handle with it. Super gripablity, plus the added bonus of being able to close it up and file your nails with it. Start with the SS Jester, a keyring knife with a nail file should sell well. What do you think?
Paul
What if...
-
The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
-
java
- Member
- Posts: 2978
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Rosamond - Tropical Paradise without the tropics.....(or the paradise)
<b>Amen, Deacon!</b>
That is one of my main complaints about SS knives also. I prefer an SS with Kraton inserts like the Pro-Grip for that reason. I also like the kraton on the inside of the clip of this knife. Can't hardly loose the bugger. I've thought about knurling the handles to improve purchase. Sure-grip used to have adhesive backed strips you could buy to cut and place on tools, knives, etc. I think Diamond Grip might have strips or an expoxy compound that would work also. Good idea!
Stay safe! Stay sharp!
That is one of my main complaints about SS knives also. I prefer an SS with Kraton inserts like the Pro-Grip for that reason. I also like the kraton on the inside of the clip of this knife. Can't hardly loose the bugger. I've thought about knurling the handles to improve purchase. Sure-grip used to have adhesive backed strips you could buy to cut and place on tools, knives, etc. I think Diamond Grip might have strips or an expoxy compound that would work also. Good idea!
Stay safe! Stay sharp!
-
Sword and Shield
- Member
- Posts: 2050
- Joined: Fri Sep 24, 2004 10:33 am
- Location: USA
-
dialex
- Member
- Posts: 9169
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Campina, Romania, Europe, Terra
- Contact:
Good idea, I think it could be made.
<a href="http://users.pcnet.ro/dialex"><font color=blue>(my page)</font></a>
<a href="http://users.pcnet.ro/dialex"><font color=blue>(my page)</font></a>
I can see adding knurling or kraton inserts,but diamond coating? I think it would be way too abrasive. You'd shred your pockets from drawing and replacing the knife. Plus you'd prolly scratch other things. I had a bad experience w/a diamond file. I put my Calypso Jr in my watch pocket w/a Leatherman Juice. The very edge of the L'man's diamond file was exposed,and when I pulled the Calypso out,I put a nice pair of scratches on the blade.
I like the idea of putting slots in the handles(ala Navigator). Not only would you be able to get a better grip,but it would also lighten the handles. One of the things I like about the Mariners is the lighter handle from the drying slots.
They do need to do something with the larger SS models. Too heavy and slippery.
I like the idea of putting slots in the handles(ala Navigator). Not only would you be able to get a better grip,but it would also lighten the handles. One of the things I like about the Mariners is the lighter handle from the drying slots.
They do need to do something with the larger SS models. Too heavy and slippery.
How about coating the scales with the crinkle coat Busse uses?
<img src=http://www.bladeforums.com/forums/image ... rforum.gif
<img src=http://www.bladeforums.com/forums/image ... rforum.gif
-
The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Dynarider raises a valid point that I had not considered, regarding the possibility of damage to other items, although personally, I never carry anything else in the same pocket with my knife. Regarding slots or lightening holes, I wonder, if these have to be machined, where the break point would be cost-wise between doing this and just switching to titanium. I have kind of a love/hate relationship with my Navigator, find the aluminum handle far more slippery that comparable size stainless ones (Pegasus, Copilot, D'fly) despite the slots. It is, in fact, the only Spyderco lockback I own that I cannot open one reliably handed.
Java, I've considered adding something myself also, have heard good things about skateboard tape, also about 3M stair tread safety tape (although the only sample of this I ever handled felt way too aggressive) and have even wondered about how the material sold as bathtub safety strips would work (this last might be best, since the adhesive has to be able to stand up to both heat and moisture, and the surface must provide non-slip traction for soapy feet under those conditions while being gentle enough not to damage the proverbial baby's bottom).
Paul
Java, I've considered adding something myself also, have heard good things about skateboard tape, also about 3M stair tread safety tape (although the only sample of this I ever handled felt way too aggressive) and have even wondered about how the material sold as bathtub safety strips would work (this last might be best, since the adhesive has to be able to stand up to both heat and moisture, and the surface must provide non-slip traction for soapy feet under those conditions while being gentle enough not to damage the proverbial baby's bottom).
Paul
-
Sword and Shield
- Member
- Posts: 2050
- Joined: Fri Sep 24, 2004 10:33 am
- Location: USA
-
sc_rebel1957
- Member
- Posts: 704
- Joined: Fri Sep 24, 2004 10:33 am
- Location: SOUTH CAROLINA USA
- Contact:
As mentioned before I've found what I believe to be the perfect solution to slick SS scales.
I use C/F sheet bonded to the scales with epoxy shiney side down, on the backside is a grippy diamond pattern which feels like the old FRN style handles to the touch but adds tons of class and beauty, mail me if you'd like to see a sample. Ron
I use C/F sheet bonded to the scales with epoxy shiney side down, on the backside is a grippy diamond pattern which feels like the old FRN style handles to the touch but adds tons of class and beauty, mail me if you'd like to see a sample. Ron