Rebuilding your collection from scratch
Rebuilding your collection from scratch
The thread about which knife you'd replace first was fun.
Some of the replies indicated they'd go full collector mode again.
Others would buy a few folders and call it a day.
What do you see yourself buying if you had to start your collection from scratch?
Assume you have the funds to get what you'd want, but you can only choose models you could realistically acquire in late 2022.
Here's what I'd go with if I had to start over from the ground up:
H1 Pacific Salt PE x2
S30V DLC Manix XL
Native Chief CF/S90V
Aqua Salt PE
Street Beat LW
That for me covers lightweight EDC folder (Pacific), lightweight EDC fixie (Street beat), bigger beefier folder (Manix XL), bigger beefier fixed blade (aqua salt), and something slim and sexy for dressing up (chief).
I like my Military, Resilience, Yojumbo, Street Bowie, Police, etc., but this would be enough to get my feet back on the ground. Really I could get by with just the Salts but it's nice to have options.
What would be your baseline collection?
Some of the replies indicated they'd go full collector mode again.
Others would buy a few folders and call it a day.
What do you see yourself buying if you had to start your collection from scratch?
Assume you have the funds to get what you'd want, but you can only choose models you could realistically acquire in late 2022.
Here's what I'd go with if I had to start over from the ground up:
H1 Pacific Salt PE x2
S30V DLC Manix XL
Native Chief CF/S90V
Aqua Salt PE
Street Beat LW
That for me covers lightweight EDC folder (Pacific), lightweight EDC fixie (Street beat), bigger beefier folder (Manix XL), bigger beefier fixed blade (aqua salt), and something slim and sexy for dressing up (chief).
I like my Military, Resilience, Yojumbo, Street Bowie, Police, etc., but this would be enough to get my feet back on the ground. Really I could get by with just the Salts but it's nice to have options.
What would be your baseline collection?
Re: Rebuilding your collection from scratch
I guess I'd be a little boring.
PM2 any steel
PM3 any steel besides BD1N
Manix 2 maybe
Spydiechef LC200N
Chaparral LW
Ladybug or Manbug
PM2 any steel
PM3 any steel besides BD1N
Manix 2 maybe
Spydiechef LC200N
Chaparral LW
Ladybug or Manbug
- Brock O Lee
- Member
- Posts: 3319
- Joined: Thu Jul 21, 2011 3:34 am
- Location: Victoria, Australia
Re: Rebuilding your collection from scratch
Interesting question! My baseline would probably be:
PM2 S90V (DLT exclusive)
Spydiechef
UKPK S110V
Stretch K390
K04 SE kitchen utility
Sharpmaker and diamond/CBN stones
Edit: And a 4V Military
PM2 S90V (DLT exclusive)
Spydiechef
UKPK S110V
Stretch K390
K04 SE kitchen utility
Sharpmaker and diamond/CBN stones
Edit: And a 4V Military
Last edited by Brock O Lee on Tue Nov 29, 2022 3:23 pm, edited 1 time in total.
Hans
Favourite Spydies: Military, PM2, Shaman, UKPK
Others: Victorinox Pioneer, CRK L Sebenza 31, CRK L Inkosi
Favourite Spydies: Military, PM2, Shaman, UKPK
Others: Victorinox Pioneer, CRK L Sebenza 31, CRK L Inkosi
Re: Rebuilding your collection from scratch
Dragonfly lightweight for EDC
Para 3 lightweight for household tasks
That's all I really need.
Para 3 lightweight for household tasks
That's all I really need.
Re: Rebuilding your collection from scratch
Stretch 2 K390, Shaman, Amalgam, Native Chief cf/s90v. I guess I could live with those... Lol
Spyderco : Resilience, Tenacious, Persistence, Manix 2 G10, Para 3 G10, Para 3 LW, Paramilitary 2,
BBS Paramilitary 2, Amalgam, Native Chief, Blade HQ Manix 2 XL, S30V Shaman, Gayle Bradley 2, DLC M4 Shaman, Magnitude, Z Wear Shaman, DLC S30V Shaman, Stretch 2, Kapara, CF/S90V Native Chief, Endela, K390 Endura, DLT 20cv Zome Endela x 2, Police 4 LW K390, SNK Native Chief, SNK Manix 2 XL, K390 Stretch 2, Stretch 2 XL, K390 Endela
BBS Paramilitary 2, Amalgam, Native Chief, Blade HQ Manix 2 XL, S30V Shaman, Gayle Bradley 2, DLC M4 Shaman, Magnitude, Z Wear Shaman, DLC S30V Shaman, Stretch 2, Kapara, CF/S90V Native Chief, Endela, K390 Endura, DLT 20cv Zome Endela x 2, Police 4 LW K390, SNK Native Chief, SNK Manix 2 XL, K390 Stretch 2, Stretch 2 XL, K390 Endela
-
- Member
- Posts: 1391
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: Rebuilding your collection from scratch
PM2 in CruWear, S110V, and K390.
Stretch 2 in K390 and a standard drop point.
Para 3 in S110V and K390.
UKPK in S110V and LC200N.
I haven't double checked that the K390 PM2 and Para 3 are still available. If not, change those out for Maxamet.
Stretch 2 in K390 and a standard drop point.
Para 3 in S110V and K390.
UKPK in S110V and LC200N.
I haven't double checked that the K390 PM2 and Para 3 are still available. If not, change those out for Maxamet.
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: Rebuilding your collection from scratch
PM 2 Leftie
Dragonfly 2
Delica Warncliffe
Native 5 LW
Salt 2
Enuff Sheepsfoot
There are more that could be added, and some that could be combined to make a shorter list - the Enuff could be a Salt instead of having a Salt 2 - or the Salt 2 could replace the Delica - but the above would do me just fine. So, that’s Forty Spydercos done away with..
Dragonfly 2
Delica Warncliffe
Native 5 LW
Salt 2
Enuff Sheepsfoot
There are more that could be added, and some that could be combined to make a shorter list - the Enuff could be a Salt instead of having a Salt 2 - or the Salt 2 could replace the Delica - but the above would do me just fine. So, that’s Forty Spydercos done away with..
Re: Rebuilding your collection from scratch
Is this the same question as the other thread just asking for more than one knife?
My answer is still the same. To lose my current collection would be too demoralizing to entirely do over. I guess I could compile a “consolation collection” but beyond that, I’d probably just divert my spare change to fishing gear.
My consolation collection of five would be -
Lil Native
Native 5
Shaman
SALT 2
McBee
My answer is still the same. To lose my current collection would be too demoralizing to entirely do over. I guess I could compile a “consolation collection” but beyond that, I’d probably just divert my spare change to fishing gear.
My consolation collection of five would be -
Lil Native
Native 5
Shaman
SALT 2
McBee
-Nick
Re: Rebuilding your collection from scratch
I still have the same thought that I would want to grab models that may not be around long, but are currently available. Starting with exclusives still available:
- PM2 DLT Cruwear
- PM2 DLT S90V
I would grab some Sprints because hey, they will not be around long and I am starting over:
- Siren S90V
- Yojumbo S90V
Might as well grab some collabs because they tend to disappear after some time:
- Gayle Bradley 2
- Kapara
From here since I am starting over with the funds, I would honestly wait on other models I like to come around in some interesting flavor. Manix 2 & XL, Native Chief, Military, Endura... I could get the standard version, but I would honestly just wait for an exclusive.
Oh, and I would grab a Pac Salt immediately too. Probably H2 with the hollow grind this time around.
And an other the Inkosi, I would get an Inkosi.
- PM2 DLT Cruwear
- PM2 DLT S90V
I would grab some Sprints because hey, they will not be around long and I am starting over:
- Siren S90V
- Yojumbo S90V
Might as well grab some collabs because they tend to disappear after some time:
- Gayle Bradley 2
- Kapara
From here since I am starting over with the funds, I would honestly wait on other models I like to come around in some interesting flavor. Manix 2 & XL, Native Chief, Military, Endura... I could get the standard version, but I would honestly just wait for an exclusive.
Oh, and I would grab a Pac Salt immediately too. Probably H2 with the hollow grind this time around.
And an other the Inkosi, I would get an Inkosi.
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
- apollo
- Member
- Posts: 2901
- Joined: Wed Nov 10, 2004 1:26 pm
- Location: A place where idiots and corrupt people are called the government…
Re: Rebuilding your collection from scratch
Manix XL , Manix XL DlC , Manix 2 g10 , Manix 2 s110v g10 and custom scales to make them all special to me. After that i would likely be on the lookout for spydies that are no longer available like the old Manixes,…
But since i almost exclusively carry and use Manixes i would have all bases covered to start a new.
But since i almost exclusively carry and use Manixes i would have all bases covered to start a new.
Last edited by apollo on Wed Nov 30, 2022 3:47 am, edited 1 time in total.
-
- Member
- Posts: 27
- Joined: Sun Apr 24, 2016 11:13 am
Re: Rebuilding your collection from scratch
My current Spydercos, and whether I'd replace them and how. I'd actually probably prioritize the sharpening stuff I use from Spyderco more than the folders themselves.
Dragonfly 2 (HAP40) -- definitely, but probably K390, and might do the wharnie blade
SpydieChef -- definitely
Native Chief (REX45 and 4V) -- definitely would re-buy either of those or some other sprint (I want a Magnacut Salt!!) if I could find one
PM2 (DLC S30V) -- definitely, though probably S90V or Cruwear or some other sprint/exclusive
Southard -- nope (but a sentimental favorite I likely won't ever sell)
GB2 -- nope
Caly 3.5 (ZDP) -- nope
Native 5 Salt -- nope
Delica (ZDP) -- nope
Endura (VG10) -- nope
Ultrafine benchstone -- definitely
Sharpmaker with CBN/diamond rods -- definitely
Double stuff -- definitely
Mas Ayoob Sprint is being delivered tomorrow -- we'll see how that fits in!
Dragonfly 2 (HAP40) -- definitely, but probably K390, and might do the wharnie blade
SpydieChef -- definitely
Native Chief (REX45 and 4V) -- definitely would re-buy either of those or some other sprint (I want a Magnacut Salt!!) if I could find one
PM2 (DLC S30V) -- definitely, though probably S90V or Cruwear or some other sprint/exclusive
Southard -- nope (but a sentimental favorite I likely won't ever sell)
GB2 -- nope
Caly 3.5 (ZDP) -- nope
Native 5 Salt -- nope
Delica (ZDP) -- nope
Endura (VG10) -- nope
Ultrafine benchstone -- definitely
Sharpmaker with CBN/diamond rods -- definitely
Double stuff -- definitely
Mas Ayoob Sprint is being delivered tomorrow -- we'll see how that fits in!
Last edited by kataphraktos on Tue Nov 29, 2022 4:31 pm, edited 1 time in total.
-
- Member
- Posts: 607
- Joined: Sun Apr 14, 2019 7:56 pm
Re: Rebuilding your collection from scratch
Pm2
Manix 2
Shaman
Endura
Spydiechef
Gb2
Yojimbo
Manix 2
Shaman
Endura
Spydiechef
Gb2
Yojimbo
Re: Rebuilding your collection from scratch
I'd focus on the salt line... Exclusively:
Salt 2 in each steel and edge configuration
Same for pacific salt
Same for Dragonfly
Spydiechef
Aqua Salt PE
I'd add the other salt models if possible, starting with the upcoming Native Magnacut.
Salt 2 in each steel and edge configuration
Same for pacific salt
Same for Dragonfly
Spydiechef
Aqua Salt PE
I'd add the other salt models if possible, starting with the upcoming Native Magnacut.
MNOSD member 0011
- spydergoat
- Member
- Posts: 402
- Joined: Sat Jul 20, 2019 1:04 am
- Location: California, USA, Earth
Re: Rebuilding your collection from scratch
I think starting over I would not try to rebuild my current rotation and instead focus on value and not sentimentality. Salt 2 and a Swiss army keychain would cover all my realistic EDC needs for 2022. I would wait for a nice deal to come along for a larger spyderco folder. Then maybe just get a cheap Mora fixed blade and stop there.
Re: Rebuilding your collection from scratch
Police4 K390 PE
P'Kal
Manbug K390
Hawkbill Ladybug
Dragonfly SE
Hawkbill Dragonfly
Wharncliffe Dragonfly K390
Stonewash Shaman
Manix XL (4V if I could find one)
S90V Chief if I could find one
Pac Salt
Then I'd start filling out my steel choices in what ever model was convenient. I find that currently I don't carry many 'mid size knives' or small as Vivi would call them. Unless I want to carry them for the steel they have.
I carry micro knives at work and big knives when Im off work. Dragonflys are always good companion knives. Especially the salts.
But I'd start from there and keep adding. I could get by with the first 11 or 12, but I like variety and trying new things. I wouldn't do anything different.
P'Kal
Manbug K390
Hawkbill Ladybug
Dragonfly SE
Hawkbill Dragonfly
Wharncliffe Dragonfly K390
Stonewash Shaman
Manix XL (4V if I could find one)
S90V Chief if I could find one
Pac Salt
Then I'd start filling out my steel choices in what ever model was convenient. I find that currently I don't carry many 'mid size knives' or small as Vivi would call them. Unless I want to carry them for the steel they have.
I carry micro knives at work and big knives when Im off work. Dragonflys are always good companion knives. Especially the salts.
But I'd start from there and keep adding. I could get by with the first 11 or 12, but I like variety and trying new things. I wouldn't do anything different.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: Rebuilding your collection from scratch
The necessities:
- ladybug k390
- dragonfly K390 wharncliffe
- atlantic salt LC200N PE
For other fun ones:
- bug
- cru-wear ayoob (still available as of writing)
- Sage 1 maxamet (I'd probably have bought this over my para 3 if they were available at the time)
- CPM-15V Manix 2 (hopefully available before 2023)
If there was a wire clip back lock lil native, I'd add that too.
- ladybug k390
- dragonfly K390 wharncliffe
- atlantic salt LC200N PE
For other fun ones:
- bug
- cru-wear ayoob (still available as of writing)
- Sage 1 maxamet (I'd probably have bought this over my para 3 if they were available at the time)
- CPM-15V Manix 2 (hopefully available before 2023)
If there was a wire clip back lock lil native, I'd add that too.
Re: Rebuilding your collection from scratch
Wouldn't rebuild what I've got now. That took many years and good bang for the buck prices. Mentioned in the other thread I'd start with the knives I've had a history of EDCing. After that I'd probably buy the models I like but probably just one of each and spread different steels around different models. Would probably pick up buying new sprints and exclusives I like such as the rumored 4V Military.
Re: Rebuilding your collection from scratch
Pacific Salt H1 PE
Chaparral base model
Waterway
Military S110V
Stretch 2XL CruWear
Manix 2 G-10, best steel I could find
PM2, best steel I could find with recessed liners
Schempp Bowie, if I could find one
Chaparral base model
Waterway
Military S110V
Stretch 2XL CruWear
Manix 2 G-10, best steel I could find
PM2, best steel I could find with recessed liners
Schempp Bowie, if I could find one
Re: Rebuilding your collection from scratch
blacked out pacific salt se h1
15v manix
i suppose it says a lot that i could be okay with just these. i really like all the knives i have and would certainly miss them, but i don't necessarily feel the need to buy them all again. i wouldn't get rid of any of them on purpose either though.
15v manix
i suppose it says a lot that i could be okay with just these. i really like all the knives i have and would certainly miss them, but i don't necessarily feel the need to buy them all again. i wouldn't get rid of any of them on purpose either though.
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Rebuilding your collection from scratch
It would be nice to hear what the use cases for items in the collection are.
Personally:
- ladybug: When I'm out doing things that probably won't require a knife and don't want a knife getting in the way.
- atlantic salt: When I'm doing heavy exercise that will soak my knife in sweat and activities where a blunt tip may be safer. Also the sheepsfoot blade is helpful for carving away things from 3D prints.
- dragonfly: For all other situations.
I don't need anything else, but having some variety is always fun.
Personally:
- ladybug: When I'm out doing things that probably won't require a knife and don't want a knife getting in the way.
- atlantic salt: When I'm doing heavy exercise that will soak my knife in sweat and activities where a blunt tip may be safer. Also the sheepsfoot blade is helpful for carving away things from 3D prints.
- dragonfly: For all other situations.
I don't need anything else, but having some variety is always fun.