Reveal 10 Live!

[ladybug93]

i suspect a lot of that is done with photoshop. there have been issues like this in the past as well, where a knife doesn't really match up with the stock photo exactly. but the two stock photos do match exactly, which leads me to think they just used the same photo.

[steelcity16]

I was bummed that we didn't have an Endela Salt (Wharnie and Leaf), Dodyfly/Cricketfly, and still no Cru-carta Seki models. Here 's hoping for Reveal 11!!

[FullScaler]

Oooo, that rex76 mule in a potential 68-70 HRC is looking sweet. I'm very interested to see what the finished blade tests out at and to get it in my hands to see how it performs in some real world use.

[NicoColt1911]

The UKPK has a new pattern for the serrations. It gained one big "wave" and lost a part of the PE at the tip.

What pictures are you referring to? Comparing the catalogue pictures both have the same number of big "waves" (6) and the same number of small waves (5 doublewaves).

When you compare the knives' pages on the Spyderco website you will notice that the green knife's Overall Length is
6.92" (176mm) compared to the yellow knife's 6.88" (175mm). Also the green's Blade Length is 3.00" (76mm) whereas the yellow's is 2.93" (74mm).
The edge length however is identical 2.58" (66mm).

So IMHO the cutting part of the blade should be similar but the ricasso/finger-choil part might be bigger on the green one.

I compared the picture in the reveal with the real knife. And the picture in the reveal has a different pattern.
IMG_20220607_192942.jpg
That the pattern, in the pictures, in all revels/catalogs,is the same but different to th ereal knife. So I now assume, that the pattern has not changed but still is different to the one shown in the reveals/catalogs.

Thank you for the information.

[cycleguy]

Had one knife on my shortlist til this reveal, now have eight.

[steelcity16]

Had one knife on my shortlist til this reveal, now have eight.

Its funny how people's tastes are so different, but thats what make Spyderco great. This was probably the least exciting of all the reveals for me. I only added 2 (3 if you count the Ayoob as two for the PE and SE) to my list between the Ayoob and K390 Endela Wharnie. I had 5+ from many of the other Reveals.

[eventhorizon]

That "consumer direct only"/"no discount" is pretty much a "no" for us Europeans.... bummer.

[vanka]

That "consumer direct only"/"no discount" is pretty much a "no" for us Europeans.... bummer.

Exactly. Satin finish is 250, another 50 shipping goes to 300. 20%VAT equals to 360 and on top of that there's another 8%import tax in the UK. And the final price is 388.8$, converted at the current rates is roughly 320£. I'm not against this price for a sprint run in general. But not in M390 steel.

[Manixguy@1994]

The Endela and Native Salt definitely on my list . The Chief is a disappointment. Mules look interesting make have to get at least one . MG2

[Ramonade]

That "consumer direct only"/"no discount" is pretty much a "no" for us Europeans.... bummer.

It's a bummer for the MT2 production Mule too, even if it'll stay afordable.
I planned to buy 10 of them at once if the website allowed it, but it's gonna cost me aroud 150€ in customs fees alone . I've reconsidered my plan

[Chleiti]

That "consumer direct only"/"no discount" is pretty much a "no" for us Europeans.... bummer.

It's a bummer for the MT2 production Mule too, even if it'll stay afordable.
I planned to buy 10 of them at once if the website allowed it, but it's gonna cost me aroud 150€ in customs fees alone . I've reconsidered my plan

You need somebody who can buy a stack of them stateside and then smuggle them over in a checked bag when visiting Europe... a Mule mule.

[Ramonade]

That "consumer direct only"/"no discount" is pretty much a "no" for us Europeans.... bummer.

It's a bummer for the MT2 production Mule too, even if it'll stay afordable.
I planned to buy 10 of them at once if the website allowed it, but it's gonna cost me aroud 150€ in customs fees alone . I've reconsidered my plan

You need somebody who can buy a stack of them stateside and then smuggle them over in a checked bag when visiting Europe... a Mule mule.

thanks for the excellent idea ! Now that this is on the Internet, nobody will ever know ! I'll train a mulmul then, with the hope this Mule mule will accomplish great things. Like bringing me Mules.

[cycleguy]

Had one knife on my shortlist til this reveal, now have eight.

Its funny how people's tastes are so different, but thats what make Spyderco great. This was probably the least exciting of all the reveals for me. I only added 2 (3 if you count the Ayoob as two for the PE and SE) to my list between the Ayoob and K390 Endela Wharnie. I had 5+ from many of the other Reveals.

I like fixed blades, Seki family, Wharncliffe, UKPK, and green salts.

You can see they are hitting me from all sides

[AlexRus]

Anyone received the printed version of the Reveal 10 yet?

[JSumm]

Yes, but from Blade Show.

[AlexRus]

Yes, but from Blade Show.

Cool! Does it have the Retail Price Guide included?

[JSumm]

Yes, but from Blade Show.

Cool! Does it have the Retail Price Guide included?

No it does not.

I think the only pricing I have seen is MSRP on the online Reveal. Need to click "Download" and it is the first few pages.

[AlexRus]

Yes, but from Blade Show.

Cool! Does it have the Retail Price Guide included?

No it does not.

I think the only pricing I have seen is MSRP on the online Reveal. Need to click "Download" and it is the first few pages.

Already done!
I'm just collecting the Catalog and Reveal printed versions as well))

[Buddafucco]

Not sure if I believe they actually have it but,
S35vn Persistence Lightweight SpyderEdge shows In Stock.
KnifeWorks... https://knifeworks.com/spyderco-persist ... d-c136sbl/

Edit: False alarm... Says out of stock now

[RamZar]

The two “Consumer Direct” Native Chief M390 & Brown G-10 Sprint Runs were/are supposed to be sold only directly through Spyderco.

However, they’re listed now at KnifeWorks as out of stock with the usual 30% off MSRP price — $175 & $203 instead of $250 & $290 for Satin & Black DLC blades respectively.

https://knifeworks.com/spyderco-native- ... -c244gdbn/

https://knifeworks.com/spyderco-native- ... lc-c244gd/