Liking 20CV
Liking 20CV
There a lot of great steels out there, but I seem to be gravitating to 20CV in my Watu lately.
I have other knives in the steel but the Watu just seems to cut better (for me). It could be the blade thickness and the thin grind, but it doesn't matter, I like the knife.
I have other knives in the steel but the Watu just seems to cut better (for me). It could be the blade thickness and the thin grind, but it doesn't matter, I like the knife.
SCARAMOUCHE!
Re: Liking 20CV
Same. Sharpens up great and really rust resistant. I bike with a 20cv dragonfly in my jersey. So it’s just soaked in sweat all the time and is completely fine.
Re: Liking 20CV
Agreed. My favorite EDC is the DLT Trading Company Para-Military 2 with a red handle and M390 steel (the original steel that 20CV was modeled on). I have several 20CV knives, but none of them are Spydercos. Knife Steel Nerds has a great article about this line of steels: https://knifesteelnerds.com/2020/06/01 ... -and-204p/.
"We cannot live better than in seeking to become better."
--Socrates
--Socrates
-
- Member
- Posts: 557
- Joined: Thu Oct 07, 2021 3:07 am
Re: Liking 20CV
I’m also a big fan of 20CV. Easy to sharpen and holds the edge well.
-
- Member
- Posts: 276
- Joined: Wed Jun 02, 2021 5:57 pm
Re: Liking 20CV
20CV is Awesome!!!
- Manixguy@1994
- Member
- Posts: 12620
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: Liking 20CV
I have the KJ Endura and the DLT Dragonfly2 exclusives, count me in as a fan . MG2
Last edited by Manixguy@1994 on Wed May 25, 2022 6:54 pm, edited 1 time in total.
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: Liking 20CV
Yes. I like it too. Just remember that M390 and CTS204P are the same thing from other foundries.
I am fond of 20CV because it seems to get overlooked as compared to its brothers.
I happen to have my Manix in 20CV sitting here right next to me. I sees plenty of use.
I am fond of 20CV because it seems to get overlooked as compared to its brothers.
I happen to have my Manix in 20CV sitting here right next to me. I sees plenty of use.
- Doc Dan
- Member
- Posts: 14830
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Liking 20CV
I have a great 204P Delica that I wouldn't part with for anything.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Liking 20CV
I've always enjoyed Spyderco's 20CV/204P/M390. I also appreciate that their blades are usually ground thin enough to take advantage of it.
Re: Liking 20CV
When rust is a concern but I want a little more hardness than toughness, I can happily reach for a Military Model, PM2, Manix2, Pattadese, or Watu, as I have specimens of each model in the 20CV/204P/M390 family.
If there is a detectable difference in the high performance of these models, I would presume the reason will be found in geometry, not recipe.
EDIT TO ADD: The Watu is a lovely blade.
If there is a detectable difference in the high performance of these models, I would presume the reason will be found in geometry, not recipe.
EDIT TO ADD: The Watu is a lovely blade.
Last edited by wrdwrght on Tue Jun 07, 2022 1:46 pm, edited 1 time in total.
-Marc (pocketing an S110V Native5 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: Liking 20CV
Had a nice little family of these steels at one point in time. Nothing wrong with any of them, a favorite of the stainless steels for me.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: Liking 20CV
Picked up this Manix and the LW 20CV one pretty close together and realized I've mostly been carrying the LW. Time to get the G10 in pocket for a little while.
Just bumping the thread because either way, still loving 20CV/M390/204P.
Just bumping the thread because either way, still loving 20CV/M390/204P.
- Manixguy@1994
- Member
- Posts: 12620
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: Liking 20CV
Favorite of mine too . I have the KJ exclusive but this one seems to get the most attention . MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
-
- Member
- Posts: 76
- Joined: Sat May 06, 2023 9:07 pm
Re: Liking 20CV
I dislike my PM3LW in 20CV, but I think that is more the wedge of a blade than the steel itself. It just dosesnt cut nicely, likely due to the length:thickness ratio. Also I have ended up with some ragged edges off the SM stones, but I dont feel like Im doing anything different compared to cruwear, vg10, or s90v.
So count me in the 'meh' camp. My experience with it does not leave me wanting more, though I know its a very popular steel family. One exception is the REC avocado PM2 or manix, but I only want those for the colors, not the 204p.
So count me in the 'meh' camp. My experience with it does not leave me wanting more, though I know its a very popular steel family. One exception is the REC avocado PM2 or manix, but I only want those for the colors, not the 204p.
Re: Liking 20CV
I'm 20CV poor and have just the one knife in it, but I'm liking it so far...
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Liking 20CV
Could you elaborate on how the edge was ragged? Also, just the med+fine rods or also using any of diamonds/CBN/ultrafines?Spyderwebs wrote: ↑Tue Sep 19, 2023 9:44 amAlso I have ended up with some ragged edges off the SM stones, but I dont feel like Im doing anything different compared to cruwear, vg10, or s90v.
Re: Liking 20CV
I have several knives with 20CV, 204P, and M390 that get touched up on the SM often. No issues with ragged edges. I sharpen them just like I would any other steel
Of all the things I've lost I miss my mind the most!