Blasphemy!RadioactiveSpyder wrote: ↑Mon May 23, 2022 5:07 pm...
Since the original Lil’ Mat had black scales, I’d imagine they wouldn’t offer this new one with a black handle too
...
sal can we get some new Lil Matriarchs?
Re: sal can we get some new Lil Matriarchs?
MNOSD 0047 - mens sana in corpore sano -
Do more than is required of you . Patton
For man's only weapon is courage that flinches not from the gates of **** itself, and against such not even the legions of **** can stand. Robert E. Howard
Do more than is required of you . Patton
For man's only weapon is courage that flinches not from the gates of **** itself, and against such not even the legions of **** can stand. Robert E. Howard
-
- Member
- Posts: 49
- Joined: Sun Mar 27, 2022 4:24 pm
Re: sal can we get some new Lil Matriarchs?
Bento Box has Lil Matriarchs as their exclusive thing.razehound wrote: ↑Sat May 21, 2022 9:09 pmMournfulCongregant wrote: ↑Sat May 21, 2022 10:05 amYou know you can do that, right? My Lil Matriarch is waved and ringed, and all my Ma2s are ringed.
Yes, I am aware that there are rings available. And I was not trying to say that spyderco should offer rings, either.
What I was saying was that they should release new Lil Matriarchs so that I can go out and create that combo, much like with a Ma2. Because the problem with what I was describing is that there are no Lil Matriarchs out there for me to purchase...
Favorite Spydercos: Police 4 K390 LW, Sage 5 M4 LW, K390 wharncliffe D-fly, Cricket, Crucarta PM2, M4 Micarta Shaman, Dodo.
-
- Member
- Posts: 3719
- Joined: Tue Mar 26, 2013 6:23 pm
Re: sal can we get some new Lil Matriarchs?
Big wheels keep on slouching,MournfulCongregant wrote: ↑Mon Jun 20, 2022 1:33 amBento Box has Lil Matriarchs as their exclusive thing.razehound wrote: ↑Sat May 21, 2022 9:09 pmMournfulCongregant wrote: ↑Sat May 21, 2022 10:05 amYou know you can do that, right? My Lil Matriarch is waved and ringed, and all my Ma2s are ringed.
Yes, I am aware that there are rings available. And I was not trying to say that spyderco should offer rings, either.
What I was saying was that they should release new Lil Matriarchs so that I can go out and create that combo, much like with a Ma2. Because the problem with what I was describing is that there are no Lil Matriarchs out there for me to purchase...
Proud Bento keep on gouging
Rolling on on a river
Re: sal can we get some new Lil Matriarchs?
twinboysdad wrote: ↑Mon Jun 20, 2022 11:43 amBig wheels keep on slouching,MournfulCongregant wrote: ↑Mon Jun 20, 2022 1:33 amBento Box has Lil Matriarchs as their exclusive thing.razehound wrote: ↑Sat May 21, 2022 9:09 pmMournfulCongregant wrote: ↑Sat May 21, 2022 10:05 amYou know you can do that, right? My Lil Matriarch is waved and ringed, and all my Ma2s are ringed.
Yes, I am aware that there are rings available. And I was not trying to say that spyderco should offer rings, either.
What I was saying was that they should release new Lil Matriarchs so that I can go out and create that combo, much like with a Ma2. Because the problem with what I was describing is that there are no Lil Matriarchs out there for me to purchase...
Proud Bento keep on gouging
Rolling on on a river
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: sal can we get some new Lil Matriarchs?
It would be super rad if there was a Matriarch2 with a steel handle of some sort. Stainless or Titanium, Even G10.Personally I’d buy a Titanium handle one. I know it would jack the price up, Don’t care lol.I love Spyderco knives, always have. But I've always hated the plastic handles. I feel a design like the Matriarch deserves a bomber steel handle.
-
- Member
- Posts: 180
- Joined: Sun Nov 28, 2021 8:53 pm
- Location: Maine, USA
Re: sal can we get some new Lil Matriarchs?
A Lil' Matriarch Salt would be fantastic.
Re: sal can we get some new Lil Matriarchs?
You know, despite my agreeing with this, I am thinking this will be my next purchase. The PE is where it's at for me.ZrowsN1s wrote: ↑Mon Jun 20, 2022 12:37 pmtwinboysdad wrote: ↑Mon Jun 20, 2022 11:43 amBig wheels keep on slouching,MournfulCongregant wrote: ↑Mon Jun 20, 2022 1:33 amBento Box has Lil Matriarchs as their exclusive thing.razehound wrote: ↑Sat May 21, 2022 9:09 pm
Yes, I am aware that there are rings available. And I was not trying to say that spyderco should offer rings, either.
What I was saying was that they should release new Lil Matriarchs so that I can go out and create that combo, much like with a Ma2. Because the problem with what I was describing is that there are no Lil Matriarchs out there for me to purchase...
Proud Bento keep on gouging
Rolling on on a river
Re: sal can we get some new Lil Matriarchs?
A salt version is much more appealing to me. Perhaps there will be a PE?
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-
- Member
- Posts: 49
- Joined: Sun Mar 27, 2022 4:24 pm
Re: sal can we get some new Lil Matriarchs?
I got one and gave it a ring and a wave just for fun, though it sees most use pruning in my garden!z1r wrote: ↑Thu Jul 28, 2022 12:49 pmYou know, despite my agreeing with this, I am thinking this will be my next purchase. The PE is where it's at for me.ZrowsN1s wrote: ↑Mon Jun 20, 2022 12:37 pmtwinboysdad wrote: ↑Mon Jun 20, 2022 11:43 amBig wheels keep on slouching,MournfulCongregant wrote: ↑Mon Jun 20, 2022 1:33 am
Bento Box has Lil Matriarchs as their exclusive thing.
Proud Bento keep on gouging
Rolling on on a river
I would really, really love to see the Lil Matriarch in K390, or any hawkbill/reverse-S. Cricket, Dodo, Merlin, Tasman Sugar (opposite of Salt?)...
Favorite Spydercos: Police 4 K390 LW, Sage 5 M4 LW, K390 wharncliffe D-fly, Cricket, Crucarta PM2, M4 Micarta Shaman, Dodo.
Re: sal can we get some new Lil Matriarchs?
We can be friends.MournfulCongregant wrote: ↑Sat Jul 30, 2022 4:03 pm..........
I would really, really love to see the Lil Matriarch in K390, or any hawkbill/reverse-S. Cricket, Dodo, Merlin, Tasman Sugar (opposite of Salt?)...
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: sal can we get some new Lil Matriarchs?
I would most certainly be on board for a newer/better Lil Matriarch with a thicker blade. And I would have to have one in full SE for actually carrying and using.
The Reverse S models are highly ignored and overlooked and if anyone would give them a chance that would be great.
The original Matriarch has always been a specialty type favorite of mine. The one I use occasionally with a full SE, VG-10 blade has done well for me the times I've used it. So bring on a Sprint Run of the Lil Matriarch model. Interesting thread thus far.
The Reverse S models are highly ignored and overlooked and if anyone would give them a chance that would be great.
The original Matriarch has always been a specialty type favorite of mine. The one I use occasionally with a full SE, VG-10 blade has done well for me the times I've used it. So bring on a Sprint Run of the Lil Matriarch model. Interesting thread thus far.
-
- Member
- Posts: 43
- Joined: Mon Jan 25, 2021 11:45 am
- Location: Chandler az
Re: sal can we get some new Lil Matriarchs?
I'd love one I k390 or cv20 or even spy27!
Mendozamike89
51 spyderco knives in 20 different types of steels.
My Top 3 EDC
-1- Smock s30v with black RGT micarta and lynch clip. With Skipp 3/16"1/16"11 ball bearings.
-2- Sage 5 lw (bladehq exclusive) with black m4 steel rit dyed dark green & black lynch clip to match
-3- Shaman with cruwear dlc (knife joker exclusive) with gray micarta RGT scales and long gray lynch clip.
51 spyderco knives in 20 different types of steels.
My Top 3 EDC
-1- Smock s30v with black RGT micarta and lynch clip. With Skipp 3/16"1/16"11 ball bearings.
-2- Sage 5 lw (bladehq exclusive) with black m4 steel rit dyed dark green & black lynch clip to match
-3- Shaman with cruwear dlc (knife joker exclusive) with gray micarta RGT scales and long gray lynch clip.
Re: sal can we get some new Lil Matriarchs?
+1 to everything JD as long as it comes in black FRNJD Spydo wrote: ↑Sun Jul 31, 2022 2:56 pmI would most certainly be on board for a newer/better Lil Matriarch with a thicker blade. And I would have to have one in full SE for actually carrying and using.
The Reverse S models are highly ignored and overlooked and if anyone would give them a chance that would be great.
The original Matriarch has always been a specialty type favorite of mine. The one I use occasionally with a full SE, VG-10 blade has done well for me the times I've used it. So bring on a Sprint Run of the Lil Matriarch model. Interesting thread thus far.
MNOSD 0047 - mens sana in corpore sano -
Do more than is required of you . Patton
For man's only weapon is courage that flinches not from the gates of **** itself, and against such not even the legions of **** can stand. Robert E. Howard
Do more than is required of you . Patton
For man's only weapon is courage that flinches not from the gates of **** itself, and against such not even the legions of **** can stand. Robert E. Howard
Re: sal can we get some new Lil Matriarchs?
Bumped for continued interest.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: sal can we get some new Lil Matriarchs?
I would be all over this, love my full size matriarch. Off to the sock drawer to go show the poor matriarch some love.
My socks carry tip up MNOSD Member 0021
Re: sal can we get some new Lil Matriarchs?
They do, @ $25 over MSRP, plus tax and plus $15 shipping. NO THANKS! Im not paying $175 for an $88 item.
I’d like very much to have a flat grind Lil’ Matriarch, even if it meant just selling me the blade and making my own combo.
Re: sal can we get some new Lil Matriarchs?
Yeah I'm interested in one of these, but not at Bentobox prices.
Re: sal can we get some new Lil Matriarchs?
Can’t let this die… a salt version of a lil matriarch would be sweet. So would an endela sized version as well as the pac salt matriarch. Or maybe instead of the endela go with the stretch 2 xl salt with a matriarch style blade
At least 3 handle molds are already reusable.
At least 3 handle molds are already reusable.
Last edited by prndltech on Sun Jan 01, 2023 10:53 pm, edited 1 time in total.
- Shannon
MNOSD 0006
MNOSD 0006
Re: sal can we get some new Lil Matriarchs?
I just got a Myrtle and I find the blade shape quite useful. I would definitely be interested in the more pronounced reverse S shape on the Lil Matriarch.
Re: sal can we get some new Lil Matriarchs?
A Salty Lil Matriarch in Magnacut would be great, I’d get to add that steel and knife in one package. Actually any steel works though. Why is it so easy to spend money on stuff I have to have but don’t really need?