Random: General Spydie Chat

Discuss Spyderco's products and history.
User avatar
kennethsime
Member
Posts: 4786
Joined: Thu Dec 29, 2011 8:28 pm
Location: California

Re: Random: General Spydie Chat

#161

Post by kennethsime »

The last time I lost a Spyderco was in an Illegal Pete's in downtown Denver. I guess the clip on my PM2 was loose, and I assume it stayed in the booth when we left. Called in the next day, went back the next week, no luck. Fitting that it made its way home to Colorado, though.
I'm happiest with Micarta and Tool Steel.

Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: Random: General Spydie Chat

#162

Post by Evil D »

The last knife I lost was my Ladybug hawkbill. I think it was actually stolen by a gal that rode in my work truck, just because of the timing of when I noticed it was missing (I had it S-biner clipped to my bag that was in my work truck). Before that my previous lost knife was a Buck Rush and that loss was what lead me to Spyderco, so if there ever was a silver lining behind losing a knife it was that one.
All SE all the time since 2017
~David
User avatar
archangel
Member
Posts: 2372
Joined: Mon Mar 23, 2015 2:02 pm
Location: Wuppertal, Germany, Earth

Re: Random: General Spydie Chat

#163

Post by archangel »

sal wrote:
Sun Oct 10, 2021 3:28 pm
Hi Michael,

Sorry, that's private information.

sal

I was a bit worried you'd say that. But I still asked, cause sometimes companies celebrate a big milestone production, like e.g. Volkswagen celebrated the millionth Käfer (the old Beetle) or so decades ago. There are countless examples of such celebrations. So I thought that maybe.....
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
User avatar
archangel
Member
Posts: 2372
Joined: Mon Mar 23, 2015 2:02 pm
Location: Wuppertal, Germany, Earth

Re: Random: General Spydie Chat

#164

Post by archangel »

My personal speculation is that the PM2 is a highrunner for sure, same as Delica/Endura and a few more. But are they truly on top of pure quantities? They still cost quite a few bucks, and your average muggle who just wants to own ONE better brand knife may not want to spend more than maybe $50 or a little more, so they may instead buy a Spyderco of the Value Folder lineup, and in the end one of those models tops all our beloved but 3-digit-$$ Spydies...
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
zuludelta
Member
Posts: 760
Joined: Sun Aug 11, 2019 12:54 pm

Re: Random: General Spydie Chat

#165

Post by zuludelta »

archangel wrote:
Mon Oct 11, 2021 9:54 am
My personal speculation is that the PM2 is a highrunner for sure, same as Delica/Endura and a few more. But are they truly on top of pure quantities?
Pure conjecture on my part but if I had to guess, the top nine best-selling models are probably the following in some order, based on my conversations with one of the local knife retailers & what I see regularly selling out on a couple of online stores I shop at:
  • Delica 4 (including the Salt 2)
  • Endura 4 (including the Pacific Salt 2)
  • Tenacious (G10 & LW models)
  • Native 5 (G10 & LW models)
  • Para Military 2
  • Para 3 (G10 & LW models)
  • Manix 2 (G10 & LW models)
  • Dragonfly 2
  • UK Pen Knife
Note: I think the UKPK makes the list not necessarily because it's especially popular, but because it's probably the best-selling (or even the only) option in jurisdictions & territories that have legal prohibitions against locking folders. I could be wrong, but off the top of my head, I think the UKPK might be the only strictly legal ~3" Spyderco in a significant number of markets in Western Europe and East Asia & the company probably sells a fair amount of them for that reason (I mean, apart from it being a very good design... it's basically a slipjoint Caly 3 LW).
Last edited by zuludelta on Mon Oct 11, 2021 7:11 pm, edited 2 times in total.
User avatar
Airlsee
Member
Posts: 1630
Joined: Tue Nov 01, 2016 5:27 am
Location: DFW, Texas

Re: Random: General Spydie Chat

#166

Post by Airlsee »

Image
So it goes.
SG89
Member
Posts: 10587
Joined: Fri Jul 17, 2015 12:42 pm

Re: Random: General Spydie Chat

#167

Post by SG89 »

Lanyard hole plugs are the truth
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
User avatar
TkoK83Spy
Member
Posts: 12464
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Random: General Spydie Chat

#168

Post by TkoK83Spy »

I still can't believe I've never owned a G-10 Native. I really want one, but the price of the exclusives I always thought were high for a knife that size. I don't think I'll pass up the next opportunity if there is one!
15 :bug-red 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut

-Rick
User avatar
SpyderNut
Member
Posts: 8431
Joined: Fri Sep 24, 2004 10:33 am
Location: Hoosier Country, USA
Contact:

Re: Random: General Spydie Chat

#169

Post by SpyderNut »

TkoK83Spy wrote:
Mon Oct 11, 2021 6:44 pm
I still can't believe I've never owned a G-10 Native. I really want one, but the price of the exclusives I always thought were high for a knife that size. I don't think I'll pass up the next opportunity if there is one!
I think you'd like it. Several years ago, I promised not to buy another Native--and then Spyderco produced the 2013 Forum Knife in green diamond-pattern G-10. I held off for as along as I could, but finally caved.
:spyder: -Michael

"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
benben
Member
Posts: 1933
Joined: Wed Nov 09, 2011 2:34 pm
Location: Gastonia, North Carolina.

Re: Random: General Spydie Chat

#170

Post by benben »

TkoK83Spy wrote:
Mon Oct 11, 2021 6:44 pm
I still can't believe I've never owned a G-10 Native. I really want one, but the price of the exclusives I always thought were high for a knife that size. I don't think I'll pass up the next opportunity if there is one!
Although not an exclusive, my older G-10 S35VN Native is one very tough, tank of a little knife!
mikey177
Member
Posts: 2173
Joined: Sat Aug 17, 2019 12:33 am
Location: Philippines

Re: Random: General Spydie Chat

#171

Post by mikey177 »

I like my old linered G10 Native very much.
Attachments
native5 g10 01.jpg
User avatar
Mushroom
Member
Posts: 7320
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Random: General Spydie Chat

#172

Post by Mushroom »

TkoK83Spy wrote:
Mon Oct 11, 2021 6:44 pm
I still can't believe I've never owned a G-10 Native. I really want one, but the price of the exclusives I always thought were high for a knife that size. I don't think I'll pass up the next opportunity if there is one!
You gotta! It's kind of like not owning a PM2 or a Delica. The Native 5 is definitely part of my Top 5 Spydies of all time.

I have to ask though, you specified G10 Native, have you owned an FRN Native?
-Nick :bug-red
Image
User avatar
TkoK83Spy
Member
Posts: 12464
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Random: General Spydie Chat

#173

Post by TkoK83Spy »

Mushroom wrote:
Mon Oct 11, 2021 7:23 pm
I have to ask though, you specified G10 Native, have you owned an FRN Native?
I did, I had the Rex45 sprint for a few days but knew the combination of the small blade and frn wouldn't work for me. But, I did like the ergos of the knife! Whenever I see a nice G10 Native I always think "I'd like to try that"
15 :bug-red 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut

-Rick
User avatar
Airlsee
Member
Posts: 1630
Joined: Tue Nov 01, 2016 5:27 am
Location: DFW, Texas

Re: Random: General Spydie Chat

#174

Post by Airlsee »

It really is a model everyone should own...

Image
So it goes.
User avatar
Woodpuppy
Member
Posts: 3702
Joined: Wed Jun 27, 2018 6:38 pm
Location: Florida

Re: Random: General Spydie Chat

#175

Post by Woodpuppy »

That fluted CF is really something.
bearrowland
Member
Posts: 3558
Joined: Thu Jul 19, 2018 8:59 pm
Location: Julian Pennsylvania USA Earth

Re: Random: General Spydie Chat

#176

Post by bearrowland »

Has there been, or any talk of, a Spyderedge PM2? I don't think I've ever seen one but I'd love to have one for my EDC.
Barry

Bonne Journey!

For the word of God is living and powerful, and sharper than any two edged sword

Do what you can, where you are, with what you have! Theodore Roosevelt

MNOSD member 0032
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: Random: General Spydie Chat

#177

Post by Evil D »

bearrowland wrote:
Mon Oct 11, 2021 8:52 pm
Has there been, or any talk of, a Spyderedge PM2? I don't think I've ever seen one but I'd love to have one for my EDC.

They're currently in production.

https://www.bladehq.com/item--Spyderco- ... -10--50820
All SE all the time since 2017
~David
User avatar
Sharp Guy
Member
Posts: 8568
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: Random: General Spydie Chat

#178

Post by Sharp Guy »

Spydergirl88 wrote:
Mon Oct 11, 2021 6:26 pm
Lanyard hole plugs are the truth
I think they're kind of silly to be honest lol
Of all the things I've lost I miss my mind the most!
User avatar
Sharp Guy
Member
Posts: 8568
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: Random: General Spydie Chat

#179

Post by Sharp Guy »

Knock on wood....I've never really lost a knife for any length of time. Usually it's just trying to remember which pair of jeans or shorts I left it in and then digging through the laundry hamper to find it. I do sometimes realize that I haven't seen a knife for awhile and then trying to figure out where it is in a couple places where I store my knives. Which reminds me, I haven't seen my copper Kershaw for a few months...
Last edited by Sharp Guy on Tue Oct 12, 2021 11:55 am, edited 1 time in total.
Of all the things I've lost I miss my mind the most!
User avatar
p_atrick
Member
Posts: 1539
Joined: Fri Jun 16, 2017 5:35 pm
Location: Boston Area

Re: Random: General Spydie Chat

#180

Post by p_atrick »

I was just reading during my lunch break when I came across this:

Image
Post Reply