What Will Be The First Magnacut Model?
Re: What Will Be The First Magnacut Model?
I think the Military would be a good choice
Re: What Will Be The First Magnacut Model?
I hope that it’s a Military. It has been a while since we had one and this blade steel just seems made for it.
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
-
- Member
- Posts: 284
- Joined: Fri Feb 26, 2021 8:43 am
- Location: Portland, OR
Re: What Will Be The First Magnacut Model?
I would like to see
Colorado
- Native Chief G10
- Manix 2 G10
- Military
Seki
- Endura 4
Taichung
- Caribbean
- Chaparral LW
- Sage 1
- Kapara with textured G10
Wildcards
- Caly 3.5 LW
- Spydie Chef
- Brouwer
Then make everything else.
Colorado
- Native Chief G10
- Manix 2 G10
- Military
Seki
- Endura 4
Taichung
- Caribbean
- Chaparral LW
- Sage 1
- Kapara with textured G10
Wildcards
- Caly 3.5 LW
- Spydie Chef
- Brouwer
Then make everything else.
Re: What Will Be The First Magnacut Model?
Hopefully an inexpensive folder like frn native.
Re: What Will Be The First Magnacut Model?
For a very first I hope it is the mule. As for a folder it will be any of the three - pm2, native 5 or manix lw.
Re: What Will Be The First Magnacut Model?
I'm in for a mule, a shaman, and a Millie. When was the last time we saw a Millie sprint? Or just Millies in stock anywhere...?
- Brock O Lee
- Member
- Posts: 3324
- Joined: Thu Jul 21, 2011 3:34 am
- Location: Victoria, Australia
Re: What Will Be The First Magnacut Model?
Military will get my money without a doubt!
Hans
Favourite Spydies: Military, PM2, Shaman, UKPK
Others: Victorinox Pioneer, CRK L Sebenza 31, CRK L Inkosi
Favourite Spydies: Military, PM2, Shaman, UKPK
Others: Victorinox Pioneer, CRK L Sebenza 31, CRK L Inkosi
Re: What Will Be The First Magnacut Model?
I hope its a big fixed blade like the Province, since stainlessness and toughness are usually hard to find together in this category.
Re: What Will Be The First Magnacut Model?
Honestly, I really don't care what model it is, as long as Spyderco hopefully makes it a regular production knife, and not a dealer exclusive.
It would be a real shame for such a magnificent steel (on paper) to be relegated into a dealer exclusive and limiting the number of people who are willing to actually use the steel in real life, versus collectors who will just make this their instagram/safe queens.
It would be a real shame for such a magnificent steel (on paper) to be relegated into a dealer exclusive and limiting the number of people who are willing to actually use the steel in real life, versus collectors who will just make this their instagram/safe queens.
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet
Re: What Will Be The First Magnacut Model?
Does Larrin have a favorite model?
- Abyss_Fish
- Member
- Posts: 811
- Joined: Tue Apr 21, 2020 3:23 pm
- Location: Minnesota, USA.
Re: What Will Be The First Magnacut Model?
Something standard like the Native G10.
Although a watu would be neat...
Although a watu would be neat...
Lightly insane.
Current spydie collection: Watu, Rhino, UKPK Salt G10 bladeswap, Yojimbo 2 Smooth G10 Cru-Wear, Manix lw “mystic” 20cv, SmallFly 2, Waterway, Ladybug k390, Caribbean
Current favorite steels: sg2/R2, lc200n/Z-FiNit, 3v
Current spydie collection: Watu, Rhino, UKPK Salt G10 bladeswap, Yojimbo 2 Smooth G10 Cru-Wear, Manix lw “mystic” 20cv, SmallFly 2, Waterway, Ladybug k390, Caribbean
Current favorite steels: sg2/R2, lc200n/Z-FiNit, 3v
Re: What Will Be The First Magnacut Model?
I like the idea of MagnaCut fixed blades or kitchen knives a lot and it’d make sense if it was first offered as a mule.
rex121 is the king of steel, but nature’s teeth have been cutting for hundreds of millions of years and counting :cool:
Re: What Will Be The First Magnacut Model?
I don't have a favorite Spyderco. I like my BD1N Para 3 a lot. I carried a Spyderco small Persian for several years it is a fun odd knife designed by Ed Schempp. https://www.spyderco.com/catalog/detail ... r-75mm/204
Last edited by Larrin on Mon Jun 14, 2021 6:26 am, edited 1 time in total.
http://www.KnifeSteelNerds.com - Steel Metallurgy topics related to knives
Re: What Will Be The First Magnacut Model?
I've always liked the Persians...I would be aaaall over a MagnaCut sprint.
All SE all the time since 2017
~David
~David
Re: What Will Be The First Magnacut Model?
That would be incredible. I'm super excited to try out some SE MagnaCut, I just hope it comes as an option on something, let alone something as cool as a Persian.
All SE all the time since 2017
~David
~David
Re: What Will Be The First Magnacut Model?
MagnaCut releases in order:
1st - Mule Team 43
2nd - Shaman with Special Edition $100 bill paper Micarta scales.
3rd - Delica 4 as the modern stainless upgrade the D4 so badly needs/deserves.
1st - Mule Team 43
2nd - Shaman with Special Edition $100 bill paper Micarta scales.
3rd - Delica 4 as the modern stainless upgrade the D4 so badly needs/deserves.
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: What Will Be The First Magnacut Model?
Magnacut is going to be a high demand steel, hence low availability to start. Low availability means higher prices, usually. So it is unlikely it will shipped overseas, so China, Taiwan, Japan, and Italy are out. At least at first. So a US made knife is most likely, and one that doesn't use up too much steel in any one piece. It also has to have broad appeal. So PM2, P3, or N5 are the most obvious models. That's my reasoning, at least. Spyderco could surprise us with a new model in the new steel, which would be very cool, however unlikely.
The above speculation is for the first production model, not the very first release which I still think will be the Mule. Mules are made in Taiwan these days, I think, so I could be very wrong as to where the first production folder comes from.
The above speculation is for the first production model, not the very first release which I still think will be the Mule. Mules are made in Taiwan these days, I think, so I could be very wrong as to where the first production folder comes from.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: What Will Be The First Magnacut Model?
Yeah there was a custom Sebenza at Blade I heard for like $4k and then Knife Center had it on their site for $6k which is so incredible to me, that knife would have to have jigged bone handle inlays made from Chris Reeve's rib bones for me to pay that much for a folder, but hey that's just me :D
All SE all the time since 2017
~David
~David