Are you going to Bladeshow 2021?
Are you going to Bladeshow 2021?
Less than two months away from the greatest knife show in the US and as always I’m curious what forumites I will get to chat with this year. I did see that Spyderco is once again on the vendor list so I’m very happy to see that.
Rich
Rich
Think for yourself
Re: Are you going to Bladeshow 2021?
I am planning on it.
Re: Are you going to Bladeshow 2021?
Can't wait for the videos
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
-
- Member
- Posts: 554
- Joined: Sun Jun 28, 2020 7:56 pm
Re: Are you going to Bladeshow 2021?
Nah, I don't expect the event to be covid safe even a little bit. I'll wait until vaccination numbers are up.
- Naperville
- Member
- Posts: 4417
- Joined: Sun Feb 04, 2018 2:58 am
- Location: Illinois, USA
Re: Are you going to Bladeshow 2021?
[+1]
I support the 2nd Amendment Organizations of GOA, NRA, FPC, SAF, and "Knife Rights"
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
Re: Are you going to Bladeshow 2021?
+2 :D
The best part of the show for those that can't make it! As much as I would love to go, I would be going almost exclusively for the Spyderco booth. Maybe one of these years!
-Nick
Re: Are you going to Bladeshow 2021?
You've got to expand your horizons brother!! It's ok to be a loyal customer, but you're also missing out on A LOT of great stuff from other companies these days! Have always been hoping to see you in the "others" thread sometime :pMushroom wrote: ↑Thu Apr 08, 2021 2:56 pm+2 :D
The best part of the show for those that can't make it! As much as I would love to go, I would be going almost exclusively for the Spyderco booth. Maybe one of these years!
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Naperville
- Member
- Posts: 4417
- Joined: Sun Feb 04, 2018 2:58 am
- Location: Illinois, USA
Re: Are you going to Bladeshow 2021?
I definitely need to go too! I collect a lot of different manufacturers. If I went I'd be all over the place looking at knives, but I'd have to meet Sal, Eric and Michael Janich. The knives are excellent and the steels Spyderco uses are the best in the world.Mushroom wrote: ↑Thu Apr 08, 2021 2:56 pm+2 :D
The best part of the show for those that can't make it! As much as I would love to go, I would be going almost exclusively for the Spyderco booth. Maybe one of these years!
I support the 2nd Amendment Organizations of GOA, NRA, FPC, SAF, and "Knife Rights"
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
Re: Are you going to Bladeshow 2021?
I'd love to but can't take time off work unless I'm taking the Mrs to Hawaii lol.
All SE all the time since 2017
~David
~David
Re: Are you going to Bladeshow 2021?
Yes I will be doing a heat treating class.
http://www.KnifeSteelNerds.com - Steel Metallurgy topics related to knives
Re: Are you going to Bladeshow 2021?
I have a handful of knives from other brands but I'm so obsessed with Spyderco these days that I have trouble bringing myself to actually spend money on something that isn't. I see it as a blessing and a curse. LOL :DTkoK83Spy wrote: ↑Thu Apr 08, 2021 3:00 pmYou've got to expand your horizons brother!! It's ok to be a loyal customer, but you're also missing out on A LOT of great stuff from other companies these days! Have always been hoping to see you in the "others" thread sometime :pMushroom wrote: ↑Thu Apr 08, 2021 2:56 pm+2 :D
The best part of the show for those that can't make it! As much as I would love to go, I would be going almost exclusively for the Spyderco booth. Maybe one of these years!
-Nick
-
- Member
- Posts: 423
- Joined: Sat Mar 30, 2019 4:56 pm
- Location: Knoxville, TN (LaFollette)
Re: Are you going to Bladeshow 2021?
I’ll be there!! Got an early bird pass yesterday, requested Friday off today and I’m trying to get an arm jab ASAP.
Spyderco gets all my folder attention and I’ll visit the prototype counter as much as all my other stops combined. That being said, there are several makers I’ll be considering for a fixed blade or two if I can pounce on something “fancy” right at the beginning.
Spyderco gets all my folder attention and I’ll visit the prototype counter as much as all my other stops combined. That being said, there are several makers I’ll be considering for a fixed blade or two if I can pounce on something “fancy” right at the beginning.
Re: Are you going to Bladeshow 2021?
I'm planning to be there. Hotel's been booked since last October and the Mrs. and I have both been vaccinated.
- DansGearAddiction
- Member
- Posts: 200
- Joined: Sun Sep 06, 2020 10:47 pm
- Location: Connecticut, USA
Re: Are you going to Bladeshow 2021?
Already got my first dose, but as someone high risk, I'd like to wait it out a bit longer before I start going to large gatherings, so Blade Show 2022 seems much more likely.
With that being said, I will be attending New York Custom Knife Show this year as long as it is safe to do so.
With that being said, I will be attending New York Custom Knife Show this year as long as it is safe to do so.
Current Collection
Chaparral (LW, Stepped, Stealth, Sun & Moon), Dragonfly 2 (VG-10), McBee, Stretch 2 (K390), UKPK Salt (LC200N)
Chaparral (LW, Stepped, Stealth, Sun & Moon), Dragonfly 2 (VG-10), McBee, Stretch 2 (K390), UKPK Salt (LC200N)
-
- Member
- Posts: 423
- Joined: Sat Mar 30, 2019 4:56 pm
- Location: Knoxville, TN (LaFollette)
Re: Are you going to Bladeshow 2021?
Got my arm poked today. J&J 1&done!!
Re: Are you going to Bladeshow 2021?
NOPE....
Will be working anyway, but I still wouldn't go this year.
Will be working anyway, but I still wouldn't go this year.
- Doc Dan
- Member
- Posts: 14815
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Are you going to Bladeshow 2021?
Alas, it is a long way to paddle a canoe and swimming is out of the question with my shoulder. I'll wait for the videos.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Are you going to Bladeshow 2021?
I’m gonna try to make it.
Is spyderco gonna give out vip passes again this year?
Is spyderco gonna give out vip passes again this year?
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- araneae
- Member
- Posts: 5491
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
Re: Are you going to Bladeshow 2021?
Still debating. I got both my shots and I'll decide in the next month or so.
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
Re: Are you going to Bladeshow 2021?
If it's there, I will be aswell.
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson