A few questions about the Opus.
-
- Member
- Posts: 568
- Joined: Tue Nov 26, 2019 7:12 pm
A few questions about the Opus.
Although it’s discontinued, I recently came across the Opus and liked what I saw. It’s essentially a super-charged Endura....with more curvy ergos. I did some googling and haven’t come across many actual reviews. I was wondering if any of you fine folks have experience with this pattern, and I’d love to hear your thoughts on it before I pull the trigger.
Also I see it’s running on Teflon washers. Would swapping to phosphor bronze be viable with the Opus?
Any info would be appreciated!
Also I see it’s running on Teflon washers. Would swapping to phosphor bronze be viable with the Opus?
Any info would be appreciated!
- VooDooChild
- Member
- Posts: 2622
- Joined: Wed Feb 21, 2018 1:29 am
Re: A few questions about the Opus.
If you can get a good price on one I think it will be fine. I got one because I got a ulize and was hoping I would like it as much as that knife. Personally the opus isnt for me but that doesnt mean its a bad knife. Just some things to note.
1. Its big. It is sort of that designers take on a military and it is nearly as big.
2. The blade shape is amazing. Its just really good and it works.
3. The ergos are good but they take some getting used to. On the back of my hand, so my middle finger, ring finger, and pinky, I absolutely love how the knife feels. In the non-choil grip I wish the finger groove for my fore-finger was a little bigger or had a little more contouring. I can live with it, but I dont love the way it feels on that finger in the non-choil grip.
4. The reverse thumb ramp takes some getting used to as well. Basically if you are used to pushing your thumb forward on a thumb ramp it will not feel right. Just push your thumb down into the thumb cutout and then the whole knife makes sense. So its not really like other thumb ramps but it works, especially if you relax your grip.
5. Maybe the weirdest thing is disengaging the lockbar. There is a very small cutout to disengage the lockbar with your thumb. With that said it works well once you get used to it. There is almost a little point on the lockbar, so instead of using the side of your thumb to push the lockbar over, what worked for me was to put the pad of my thumb on that "point" and disengage the lockbar like that. It seems odd at first but actually works pretty well once you are used to it. I do not know if it will work well with gloves or not but I almost never wear gloves.
Thats really all I can think of. At its original map price I think there are better options. But if you can get one for cheap it should be ok.
1. Its big. It is sort of that designers take on a military and it is nearly as big.
2. The blade shape is amazing. Its just really good and it works.
3. The ergos are good but they take some getting used to. On the back of my hand, so my middle finger, ring finger, and pinky, I absolutely love how the knife feels. In the non-choil grip I wish the finger groove for my fore-finger was a little bigger or had a little more contouring. I can live with it, but I dont love the way it feels on that finger in the non-choil grip.
4. The reverse thumb ramp takes some getting used to as well. Basically if you are used to pushing your thumb forward on a thumb ramp it will not feel right. Just push your thumb down into the thumb cutout and then the whole knife makes sense. So its not really like other thumb ramps but it works, especially if you relax your grip.
5. Maybe the weirdest thing is disengaging the lockbar. There is a very small cutout to disengage the lockbar with your thumb. With that said it works well once you get used to it. There is almost a little point on the lockbar, so instead of using the side of your thumb to push the lockbar over, what worked for me was to put the pad of my thumb on that "point" and disengage the lockbar like that. It seems odd at first but actually works pretty well once you are used to it. I do not know if it will work well with gloves or not but I almost never wear gloves.
Thats really all I can think of. At its original map price I think there are better options. But if you can get one for cheap it should be ok.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: A few questions about the Opus.
I had the Opus on my radar screen for a long time (I was looking for a "Native Chief with a liner lock") but never pulled the trigger. I read some negative comments and, in addition, it was hardly discounted by almost every Internet dealer. That made me suspicious and think that the Opus would not have a long life and would be discontinued soon .... In fact, it was in production only for 2 years.
Si vis pacem para bellum
-
- Member
- Posts: 568
- Joined: Tue Nov 26, 2019 7:12 pm
Re: A few questions about the Opus.
Thanks for the reply! I can get a new Opus for $144 USD. Would you say that's a good deal all things considered? The only thing that's preventing me from pulling the trigger currently is the teflon washer situation..VooDooChild wrote: ↑Fri Dec 04, 2020 12:19 amIf you can get a good price on one I think it will be fine. I got one because I got a ulize and was hoping I would like it as much as that knife. Personally the opus isnt for me but that doesnt mean its a bad knife. Just some things to note.
1. Its big. It is sort of that designers take on a military and it is nearly as big.
2. The blade shape is amazing. Its just really good and it works.
3. The ergos are good but they take some getting used to. On the back of my hand, so my middle finger, ring finger, and pinky, I absolutely love how the knife feels. In the non-choil grip I wish the finger groove for my fore-finger was a little bigger or had a little more contouring. I can live with it, but I dont love the way it feels on that finger in the non-choil grip.
4. The reverse thumb ramp takes some getting used to as well. Basically if you are used to pushing your thumb forward on a thumb ramp it will not feel right. Just push your thumb down into the thumb cutout and then the whole knife makes sense. So its not really like other thumb ramps but it works, especially if you relax your grip.
5. Maybe the weirdest thing is disengaging the lockbar. There is a very small cutout to disengage the lockbar with your thumb. With that said it works well once you get used to it. There is almost a little point on the lockbar, so instead of using the side of your thumb to push the lockbar over, what worked for me was to put the pad of my thumb on that "point" and disengage the lockbar like that. It seems odd at first but actually works pretty well once you are used to it. I do not know if it will work well with gloves or not but I almost never wear gloves.
Thats really all I can think of. At its original map price I think there are better options. But if you can get one for cheap it should be ok.
-
- Member
- Posts: 568
- Joined: Tue Nov 26, 2019 7:12 pm
Re: A few questions about the Opus.
What were the negative comments you heard if you don't mind me asking...?Menipo wrote: ↑Fri Dec 04, 2020 1:29 amI had the Opus on my radar screen for a long time (I was looking for a "Native Chief with a liner lock") but never pulled the trigger. I read some negative comments and, in addition, it was hardly discounted by almost every Internet dealer. That made me suspicious and think that the Opus would not have a long life and would be discontinued soon .... In fact, it was in production only for 2 years.
Re: A few questions about the Opus.
For a (value) "Native Chief with a liner lock" see the Emphasis.Menipo wrote: ↑Fri Dec 04, 2020 1:29 amI had the Opus on my radar screen for a long time (I was looking for a "Native Chief with a liner lock") but never pulled the trigger. I read some negative comments and, in addition, it was hardly discounted by almost every Internet dealer. That made me suspicious and think that the Opus would not have a long life and would be discontinued soon .... In fact, it was in production only for 2 years.
https://www.spyderco.com/catalog/details/C245G/1788
It is a bit shorter and heavier with budget steel, and made in China.
FWIW, I am very happy with my Chief.
- VooDooChild
- Member
- Posts: 2622
- Joined: Wed Feb 21, 2018 1:29 am
Re: A few questions about the Opus.
120 or less would be a better price. Thats the problem with the opus, it was priced too high to begin with and because of that the discontinued prices are also too high. That price is almost the same as a new pm2, which is also a great knife.TheGiant80 wrote:Thanks for the reply! I can get a new Opus for $144 USD. Would you say that's a good deal all things considered? The only thing that's preventing me from pulling the trigger currently is the teflon washer situation..
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: A few questions about the Opus.
Enactive wrote: ↑Tue Dec 08, 2020 10:53 amFor a (value) "Native Chief with a liner lock" see the Emphasis.Menipo wrote: ↑Fri Dec 04, 2020 1:29 amI had the Opus on my radar screen for a long time (I was looking for a "Native Chief with a liner lock") but never pulled the trigger. I read some negative comments and, in addition, it was hardly discounted by almost every Internet dealer. That made me suspicious and think that the Opus would not have a long life and would be discontinued soon .... In fact, it was in production only for 2 years.
https://www.spyderco.com/catalog/details/C245G/1788
It is a bit shorter and heavier with budget steel, and made in China.
FWIW, I am very happy with my Chief.
Thanks for the suggestion. The blade of the Emphasis is shorter and wider than that of the Chief. This results in a lower blade/handle ratio and I am not a fan of knives that I call "shrunken heads". What I like of the Chief is precisely its stylized blade.
Si vis pacem para bellum
Re: A few questions about the Opus.
VooDooChild wrote: ↑Tue Dec 08, 2020 11:47 am120 or less would be a better price. Thats the problem with the opus, it was priced too high to begin with and because of that the discontinued prices are also too high. That price is almost the same as a new pm2, which is also a great knife.TheGiant80 wrote:Thanks for the reply! I can get a new Opus for $144 USD. Would you say that's a good deal all things considered? The only thing that's preventing me from pulling the trigger currently is the teflon washer situation..
Opus now at $119.99 at Amazon, $.01 less than $120. :D
https://www.amazon.com/gp/product/B0722 ... _560724010
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet
Re: A few questions about the Opus.
A lot of people say to avoid Amazon because of the counterfeits. The Opus was an unpopular model, so there aren’t any fakes, right?
Re: A few questions about the Opus.
I got a Spyderco and a few of my Leathermans from this Amazon seller, photos4less. So far all have been legitimate units and the seller is also legitimate.
I had a delayed shipment from them due to an unforeseen closure of their offices for a few days, possibly due to covid. When I expressed my displeasure towards the unforeseen delay in shipping to their customer support, they were very apologetic, explained what happened, and gave me a coupon code for free overnight shipping at their expense the next time I order from them.
So I believe this Opus is legitimate based on my experiences with the Amazon seller.
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet