Page 2 of 2
Re: Spyderco’s best kept secret
Posted: Tue Oct 13, 2020 2:10 pm
by sal
Hi David,
I do a lot of opening a closing over the period to break it in as much as I can. Breaking up boxes is something I end up doing every day. Food prep on cutting boards and cutting food on a plate. Cutting wood / whittling. I don't do torture testing, that's not the purpose. I watch for hot spots or to notice anything that could be a potential problem. I like to use the test piece enough to sharpen it a few times and watch the edge closely under a loupe. If I'm testing a new steel, I like to pay attention to edge retention, watch for chips or roll. While I don't leave it wet, I do watch for corrosion resistance, especially on carbon steel.
I also go back to the same knife periodically. I also pay attention to comments on this very informative forum.
sal
Re: Spyderco’s best kept secret
Posted: Tue Oct 13, 2020 2:12 pm
by sal
Hi Carrot,
No decisions yet, just discussion, but if we do, I don't think I want to anodize it.
sal
Re: Spyderco’s best kept secret
Posted: Tue Oct 13, 2020 2:14 pm
by sal
wrong thread, sorry.
sal
Re: Spyderco’s best kept secret
Posted: Tue Oct 13, 2020 2:15 pm
by sal
wrong thread. sorry.
sal
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 6:40 am
by Donut
Doc Dan wrote: ↑Mon Oct 12, 2020 11:10 pm
Sal, I remember years ago that you said you carried a Manbug nearly every day? Is that still true? Has the new wharncliffe model booted your old one out of your pocket? Was the old one a G10 or FRN?
They used to talk about.. what was it, a Mosquito ground Ladybug?
viewtopic.php?f=2&t=86899
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 7:36 am
by sal
Hi Donut,
I will often carry a small model along with a larger model. For those times wen small blade is the better choice for a variety of reasons, which I am sure you understand. Now we have many small knives so I will change them out.
sal
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 7:46 am
by VashHash
sal wrote: ↑Wed Oct 14, 2020 7:36 am
Hi Donut,
I will often carry a small model along with a larger model. For those times wen small blade is the better choice for a variety of reasons, which I am sure you understand. Now we have many small knives so I will change them out.
sal
But what fixed blade do you reach for most? Inquiring minds want to know.
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 7:48 am
by Albatross
This makes me think we need an AMA with Sal...
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 8:54 am
by sal
Hi VashHash,
The following knives are on my table in my office. When I go out on the property, I will usually grab one of them.
Temperance 2, Jumpmaster 2, Proficient, Enuff.
sal
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 6:17 pm
by Sumdumguy
The JM2 looks like a perfect truck knife. One of these days I'm going to break down and get one.
What I REALLY want to see is a Rock Salt 2 in LC200N. Make it heavier at the tip and maybe a bit bigger. The ultimate mini machete.
That would be SWEEET! :D
Re: Spyderco’s best kept secret
Posted: Wed Oct 14, 2020 10:38 pm
by Tucson Tom
I finally got the Jumpmaster 2 and it is a top choice when a fixed blade is appropriate, such as mountain bike rides and sometimes hikes. I am fond of it, but good golly, what an aggressive blade, it commands respect and care.
My Manix XL is my truck knife and/or a really big fixed blade from Ontario Knife company in a carbon steel.
Re: Spyderco’s best kept secret
Posted: Thu Oct 15, 2020 8:45 am
by VashHash
sal wrote: ↑Wed Oct 14, 2020 8:54 am
Hi VashHash,
The following knives are on my table in my office. When I go out on the property, I will usually grab one of them.
Temperance 2, Jumpmaster 2, Proficient, Enuff.
sal
I had a feeling the temp 2 would be in the rotation. I still enjoy the original temperance. Works well for a lot of task and I like it in the kitchen because I can wash the whole thing without worrying.
Re: Spyderco’s best kept secret
Posted: Fri Oct 16, 2020 3:36 am
by curlyhairedboy
Sumdumguy wrote: ↑Wed Oct 14, 2020 6:17 pm
The JM2 looks like a perfect truck knife. One of these days I'm going to break down and get one.
What I
REALLY want to see is a Rock Salt 2 in LC200N. Make it heavier at the tip and maybe a bit bigger. The ultimate mini machete.
That would be SWEEET! :D
Been hoping for this as well...
Re: Spyderco’s best kept secret
Posted: Fri Oct 16, 2020 4:58 am
by Sumdumguy
curlyhairedboy wrote: ↑Fri Oct 16, 2020 3:36 am
Sumdumguy wrote: ↑Wed Oct 14, 2020 6:17 pm
The JM2 looks like a perfect truck knife. One of these days I'm going to break down and get one.
What I
REALLY want to see is a Rock Salt 2 in LC200N. Make it heavier at the tip and maybe a bit bigger. The ultimate mini machete.
That would be SWEEET! :D
Been hoping for this as well...
We can dream, right?
Re: Spyderco’s best kept secret
Posted: Fri Oct 16, 2020 8:18 am
by JD Spydo
With the great news of the C-60 Ayoob Sprint Run becoming a reality soon I'm willing to bet that model will become an EDC for a lot of people.
I still say after all these years and all these models I still maintain that the one model that to me is the "perfect" EDC folder is the "ROOKIE" model. It was perfect in size, blade length and overall ergonomics.
For a small folder and if I were restricted to shorter blades I think that the Caly Jr. might be the best kept secret.