Predictions for Reveal 7

[JMM]

Police4 LW - K390 - SE (as Sal has already confirmed)
Sage2 - Something in the M390 family perhaps? (my grail EDC is a Sage3 in 4V/Rex45/K390, in PE & SE)
Production Manix2 G10 & Shaman in K390 if no one (cough {BBS} cough) has done an Exclusive by then
Any production folder in 4V (not a Sprint or Exclusive)
Any production folder in 10V (not a Sprint or Exclusive)
SSS & SSS-XL in K390 with both SE & PE models

[jimmd]

Here's my hot take for Reveal 7: Slysz Bowie 2 is coming.

[Abyss_Fish]

Here's my hot take for Reveal 7: Slysz Bowie 2 is coming.

The hottest of takes. I've always wondered why it got discontinued even with it's substantial popularity. Maybe this is why...

[jimmd]

Here's my hot take for Reveal 7: Slysz Bowie 2 is coming.

The hottest of takes. I've always wondered why it got discontinued even with it's substantial popularity. Maybe this is why...

I don't claim to have inside knowledge, but ... on the most recent KnifeNuts Podcast, Levon stated that the Bowie is coming back into production. I can't verify that, and it doesn't mean it'll be in the next Reveal, but still!

[prndltech]

A salt 2 with the same treatment the pac salt got in reveal 6!!!

[Pancake]

SSS & SSS-XL in K390 with both SE & PE models

Man, I completely forgot about XL Stretch :D see, this is why I am waiting for one more Reveal, because there may be something really interesting in the next one.

[Abyss_Fish]

A safe bet, but...

• lc200n on two more of the seki salt series

• The next in the sage series with another fun steel

• One of the odd forum revised models (ayoob, damasteel ukpk, etc)

[Ez556]

Some of my predictions are:
1. Salt 2 with green scales and FFG LC200N blade
2. Dragonfly Salt with green scales and FFG LC200N blade
3. Lil’ Native Lightweight, very possibly sporting the LC200N blade we saw in the BenShot glass with yellow scales

Some of my wishes are:
1. G10 Manix with SPY27 blade and denim blue scales
2. PM2 LW
3. Sweet Spyderco hook-backed patch

From now on, all handles will be made from tried and true Bakelite.

You know, I know of a sizable community that would EAT UP a PM2 with bakelite handles, as long as it’s classic Russian orange. Even more so if the blades are forged from decommissioned AK47s, they could call it Commaskus.

[nerdlock]

Here's my hot take for Reveal 7: Slysz Bowie 2 is coming.

The hottest of takes. I've always wondered why it got discontinued even with it's substantial popularity. Maybe this is why...

I don't claim to have inside knowledge, but ... on the most recent KnifeNuts Podcast, Levon stated that the Bowie is coming back into production. I can't verify that, and it doesn't mean it'll be in the next Reveal, but still!

Man, this would be epic if this is true. I've seen a used one go for $675 on a site a few days ago. Pretty crazy stuff. And the knife was used and disassembled too. I'm all for capitalism, but I just feel that sometimes it brings out the worst in us. Just hate that people who had lucked out on this while it was on production are taking advantage of the artificial inflated value of this knife to rip off money from people who actually care about and want to use this knife for its intended purposes rather than holding it for some time then sell it at outrageous prices. Ok, rant over. I just hope that a Slysz Bowie 2 would be on the horizon in the near future. :)

[Johncjeff]

The BBB collaboration and the FRN Shaman have got to be close to being ready for production...

Really hoping for the BBB 15v

[kobold]

Military Maxamet PE,
Native 5 G10 Maxamet,
Manix 2 G10 Maxamet,
Military SE.


Native Chief in Rex45 for real this time.

I would buy one of each of these. Except for the Millie SE, I would buy two..

[steelcity16]

SSS & SSS-XL in K390 with both SE & PE models

Man, I completely forgot about XL Stretch :D see, this is why I am waiting for one more Reveal, because there may be something really interesting in the next one.

I think we will see these, but in Cruwear as Sal has hinted at.

[ZrowsN1s]

Im hoping for the tripleB folder and the Performance Delica.

[elena86]

I want an endela salt. Green, FFG, SE, lc200n

That

[Ez556]

I can’t believe I forgot, but another one of my “wishes” is the Manix LW Salt with an LC200N blade! At this point handle color doesn’t matter, I’d take it with anything!

[rabbitanarchy14]

a dlc dragonfly in tool steels or stainless.

[Holland]

a dlc dragonfly in tool steels or stainless.

must buy!

[emanuel]

Shawn's 15V folder?

[thojan]

Here's my hot take for Reveal 7: Slysz Bowie 2 is coming.

The hottest of takes. I've always wondered why it got discontinued even with it's substantial popularity. Maybe this is why...

I don't claim to have inside knowledge, but ... on the most recent KnifeNuts Podcast, Levon stated that the Bowie is coming back into production. I can't verify that, and it doesn't mean it'll be in the next Reveal, but still!

Man, this would be epic if this is true. I've seen a used one go for $675 on a site a few days ago. Pretty crazy stuff. And the knife was used and disassembled too. I'm all for capitalism, but I just feel that sometimes it brings out the worst in us. Just hate that people who had lucked out on this while it was on production are taking advantage of the artificial inflated value of this knife to rip off money from people who actually care about and want to use this knife for its intended purposes rather than holding it for some time then sell it at outrageous prices. Ok, rant over. I just hope that a Slysz Bowie 2 would be on the horizon in the near future. :)

I am still angry at myself that I sold mine. That was a very stupid thing to do... I would love to get a cqi version with a better detent and backspacer.

[pantagana23]

Agree with LC200N salts.

Probably Lil' Native BL with LC200N also, hoping for G10 version rather than FRN/FRCP.

My wishlist as always:

Native/Lil' Native BL G10 with M390
Left hand Para 3 G10 with SPY27/M390/LC200N