Cruwear Endura

Discuss Spyderco's products and history.
Cycletroll
Member
Posts: 465
Joined: Sun Oct 22, 2017 4:12 pm
Location: North Central New Mexico

Cruwear Endura

Postby Cycletroll » Wed Sep 09, 2020 8:19 am

When the Cruwear Delica came out some time ago I became very excited about the prospect of an Endura in one of my favorite steels.
Seems like an obvious homerun :)
Any idea on why there has not been any word on this?

User avatar
steelcity16
Member
Posts: 4672
Joined: Mon Dec 11, 2017 11:34 am

Re: Cruwear Endura

Postby steelcity16 » Wed Sep 09, 2020 8:27 am

There has been no word. I thought for sure we would have seen a Grey/Satin Cruwear Endura or Dragonfly by now as a follow up to last year's Delica. Or at least a rerun of the Delica given the popularity. It sold out within hours/minutes at every dealer, and most dealers limited it to 1 per customer. It was a huge hit. I hope the Endura and Dragonfly are coming soon.

DLT would also be wise to run the Endura and Dragonfly, as well as the Endela and Police LW in their new OD Green/TiCN Cruwear combo. The Endura is the one I am waiting for as well. This combo is really my grail knife for me. I have fallen for the Endura this year.
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
Bdubs808
Member
Posts: 734
Joined: Tue Aug 02, 2016 10:11 pm
Location: Oahu, Hawaii

Re: Cruwear Endura

Postby Bdubs808 » Wed Sep 09, 2020 8:28 am

Good question. I sold my Delica in CW and regret it a little. A new Endura Cruwear with that gray FRN would bring back that joy for me, and I think CW in a larger blade makes sense.
:spyder:

Cycletroll
Member
Posts: 465
Joined: Sun Oct 22, 2017 4:12 pm
Location: North Central New Mexico

Re: Cruwear Endura

Postby Cycletroll » Wed Sep 09, 2020 8:44 am

steelcity16 wrote:
Wed Sep 09, 2020 8:27 am
There has been no word. I thought for sure we would have seen a Grey/Satin Cruwear Endura or Dragonfly by now as a follow up to last year's Delica. Or at least a rerun of the Delica given the popularity. It sold out within hours/minutes at every dealer, and most dealers limited it to 1 per customer. It was a huge hit. I hope the Endura and Dragonfly are coming soon.

DLT would also be wise to run the Endura and Dragonfly, as well as the Endela and Police LW in their new OD Green/TiCN Cruwear combo. The Endura is the one I am waiting for as well. This combo is really my grail knife for me. I have fallen for the Endura this year.
Agreed! Grail for sure. I honestly believe a Cruwear Endura could suffice for 99%
of my knife needs.

User avatar
shunsui
Member
Posts: 1077
Joined: Fri Apr 12, 2013 10:22 pm

Re: Cruwear Endura

Postby shunsui » Wed Sep 09, 2020 12:34 pm

I'd love to buy Enduras in M390, Cruwear, and S90V.

Have the K390 on order already.

Black blades, not a big thing for me. Do like the black clips.

User avatar
The Mastiff
Member
Posts: 5554
Joined: Sun Jun 04, 2006 2:53 am
Location: raleigh nc

Re: Cruwear Endura

Postby The Mastiff » Wed Sep 09, 2020 1:35 pm

I'm still waiting for a Cruwear Endura. I'm beginning to wonder if I'll ever see one.

User avatar
steelcity16
Member
Posts: 4672
Joined: Mon Dec 11, 2017 11:34 am

Re: Cruwear Endura

Postby steelcity16 » Wed Sep 09, 2020 1:40 pm

The Mastiff wrote:
Wed Sep 09, 2020 1:35 pm
I'm still waiting for a Cruwear Endura. I'm beginning to wonder if I'll ever see one.

It's coming. DLTJordan will be our savior! I know it! :D
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
dj moonbat
Member
Posts: 1390
Joined: Sat Mar 27, 2010 11:58 am
Location: Sunny SoCal

Re: Cruwear Endura

Postby dj moonbat » Wed Sep 09, 2020 1:41 pm

In Spyderdge!

brancron
Member
Posts: 79
Joined: Tue Jan 27, 2015 6:12 pm

Re: Cruwear Endura

Postby brancron » Wed Sep 09, 2020 9:45 pm

I will be buying pretty much every new Endura that comes out: I’m an Endura fanatic! The only steels I don’t currently have are the old AUS-8 and AUS-6 ones.

Cycletroll
Member
Posts: 465
Joined: Sun Oct 22, 2017 4:12 pm
Location: North Central New Mexico

Re: Cruwear Endura

Postby Cycletroll » Wed Sep 09, 2020 10:27 pm

I'm with you brancron. Endura is a fave for me too.
I have tons of more expensive knives but more often than not it's a good old Endura in my pocket ;)

User avatar
steelcity16
Member
Posts: 4672
Joined: Mon Dec 11, 2017 11:34 am

Re: Cruwear Endura

Postby steelcity16 » Wed Sep 09, 2020 10:55 pm

brancron wrote:
Wed Sep 09, 2020 9:45 pm
I will be buying pretty much every new Endura that comes out: I’m an Endura fanatic! The only steels I don’t currently have are the old AUS-8 and AUS-6 ones.

I'm also hoping they expand the Pink S30V to the Endura and Dragonfly. Especially the TiCN coated versions.

They also really need to add a blacked out FFG PE model and an FFG SE model to the lineup as well.
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
Wartstein
Member
Posts: 9340
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: Cruwear Endura

Postby Wartstein » Thu Sep 10, 2020 7:05 am

dj moonbat wrote:
Wed Sep 09, 2020 1:41 pm
In Spyderdge!

+1
Top three going by pocket-time: Endura 4 in VG 10/Micarta-scales; Stretch 1 in VG 10; Endura 4 in HAP 40

User avatar
ChrisinHove
Member
Posts: 2956
Joined: Tue Dec 17, 2013 8:12 am
Location: 27.2046° N, 77.4977° E

Re: Cruwear Endura

Postby ChrisinHove » Sat Nov 07, 2020 11:44 am

I’ve passed on a Cruwear Delica a couple of times, now, hoping for a Cruwear Endura variant.

Surely, if zdp and k390 warrant production runs, Cruwear does too.

twelchlen
Member
Posts: 9
Joined: Fri Apr 19, 2019 9:55 am

Re: Cruwear Endura

Postby twelchlen » Sat Nov 07, 2020 11:53 am

I emailed DLT about a cruwear OD green dragonfly, and they said they have discussed it. So there may be hope.

User avatar
The Mastiff
Member
Posts: 5554
Joined: Sun Jun 04, 2006 2:53 am
Location: raleigh nc

Re: Cruwear Endura

Postby The Mastiff » Sat Nov 07, 2020 12:02 pm

Surely, if zdp and k390 warrant production runs, Cruwear does too
Yep, I think so also. Everything Cruwear sells pretty quickly and can be difficult to source. I'd buy an Endura ( or two) and an Endela as well as a Stretch.

OTOH I'm still waiting on the K390 Endura. This has been pretty late.

User avatar
jdw
Member
Posts: 1298
Joined: Thu Aug 25, 2016 6:10 pm
Location: Red Dirt

Re: Cruwear Endura

Postby jdw » Sat Nov 07, 2020 12:12 pm

The Mastiff wrote:
Sat Nov 07, 2020 12:02 pm
Surely, if zdp and k390 warrant production runs, Cruwear does too
Yep, I think so also. Everything Cruwear sells pretty quickly and can be difficult to source. I'd buy an Endura ( or two) and an Endela as well as a Stretch.

OTOH I'm still waiting on the K390 Endura. This has been pretty late.

Very real question. Why is this? It seems like fancy D2 to me. Is the production process that much more difficult?
Do right always. It will give you satisfaction in life.
--Wovoka

GarageBoy
Member
Posts: 1720
Joined: Sun Nov 14, 2004 6:49 pm
Location: Brooklyn NY

Re: Cruwear Endura

Postby GarageBoy » Sat Nov 07, 2020 1:27 pm

Maybe a much less used steel?

Cruwear endura makes more sense than a cruwear dragonfly - how much abuse are you putting on a small knife?

GJMcD
Member
Posts: 33
Joined: Sun Jan 12, 2020 9:12 am
Location: Canada

Re: Cruwear Endura

Postby GJMcD » Sat Nov 07, 2020 3:54 pm

shunsui wrote:
Wed Sep 09, 2020 12:34 pm
I'd love to buy Enduras in M390, Cruwear, and S90V.

Have the K390 on order already.

Black blades, not a big thing for me. Do like the black clips.
I’d definitely be interested in all three of these as well.

The Meat man
Member
Posts: 4976
Joined: Wed Jan 03, 2018 8:01 pm
Location: Missouri, USA

Re: Cruwear Endura

Postby The Meat man » Sat Nov 07, 2020 5:32 pm

Back when the OD green, Cruwear Delica came out, I started a thread asking DLT if they had any plans to run an Endura in this combo. Their response:
DLTJordan wrote:
Fri Sep 18, 2020 7:49 am
Its been discussed, the Endura sells significantly slower than the Delica, which in turn sells significantly slower than the Manix 2/Para 2 class of exclusive knives. It makes it hard to give the green light to a batch of the quantity we usually order. Personally I'd love to see it, I really like the Endura, but right now I don't have an ETA.
Here's the thread if anyone is interested:
viewtopic.php?t=87645
- Connor

"What is a man profited, if he shall gain the whole world, and lose his own soul?"

User avatar
steelcity16
Member
Posts: 4672
Joined: Mon Dec 11, 2017 11:34 am

Re: Cruwear Endura

Postby steelcity16 » Sat Nov 07, 2020 6:17 pm

The Meat man wrote:
Sat Nov 07, 2020 5:32 pm
Back when the OD green, Cruwear Delica came out, I started a thread asking DLT if they had any plans to run an Endura in this combo. Their response:
DLTJordan wrote:
Fri Sep 18, 2020 7:49 am
Its been discussed, the Endura sells significantly slower than the Delica, which in turn sells significantly slower than the Manix 2/Para 2 class of exclusive knives. It makes it hard to give the green light to a batch of the quantity we usually order. Personally I'd love to see it, I really like the Endura, but right now I don't have an ETA.
Here's the thread if anyone is interested:
viewtopic.php?t=87645

Yeah, I've asked Jordan numerous times about an Endura and Military exclusive in Cruwear and have received the same response. I think we will see the Military in the Cru-ple eventually. Hopefully an Endura will come as well. They may want a break from the server melt-downs with a nice slow sale that still sells out in a week or two like the Delica. :D
:spyder: CRU-CARTA THEM ALL! :spyder:


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: 00max00, Bing [Bot], dkelley661, Enactive, Google [Bot], Joshcrutchley1, JRinFL, MFlovejp, mikey177, skeeg11, Skywalker, T.J. and 59 guests