My first post and a question
My first post and a question
Hey guys and gals,
I am new to the forum here, this is my first post, but have owned Spyderco knives for quite some time now. I just ordered 3 new Spyderco knives and can't wait for tomorrow (pics to follow when they arrive).
I tried searching what tools I need to maintain, change, or tighten up my knife parts - specifically the clip position - but didn't come up with anything helpful. Is there a set anyone can recommend I should get or can I just go down to hardware store?
Thanks for all the good information on here!
Stay safe,
Jay
I am new to the forum here, this is my first post, but have owned Spyderco knives for quite some time now. I just ordered 3 new Spyderco knives and can't wait for tomorrow (pics to follow when they arrive).
I tried searching what tools I need to maintain, change, or tighten up my knife parts - specifically the clip position - but didn't come up with anything helpful. Is there a set anyone can recommend I should get or can I just go down to hardware store?
Thanks for all the good information on here!
Stay safe,
Jay
~A knife is like a credit card...never leave home without it!
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
Re: My first post and a question
i have a few different torx bit sets that are all cheap. they work alright, but they are not the highest quality. people seem to really like the wiha bit sets. they're a little more expensive, but with tools, you get what you pay for, generally speaking. they're not that expensive. i'll be ordering some as soon as my junky set craps out.
some that i have that work well are the leatherman bit kit and a worksharp edc micro sharpener and knife tool. both of these have the torx bits you'll most commonly need and are good quality items with more versatility.
welcome. :)
some that i have that work well are the leatherman bit kit and a worksharp edc micro sharpener and knife tool. both of these have the torx bits you'll most commonly need and are good quality items with more versatility.
welcome. :)
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: My first post and a question
Wiha brand is what I use
Welcome!
Welcome!
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: My first post and a question
Hi Jay. Welcome to the forum.
Hardware store is not always a bad idea. Craftsman makes a great little 18 bit multi screwdriver for under $10. I use it to make tweaks on my knives and I sent the granddaughter off to college with one for glasses repair and all miscellaneous.
https://www.craftsman.com/products/18-p ... on_id=6500
Hardware store is not always a bad idea. Craftsman makes a great little 18 bit multi screwdriver for under $10. I use it to make tweaks on my knives and I sent the granddaughter off to college with one for glasses repair and all miscellaneous.
https://www.craftsman.com/products/18-p ... on_id=6500
Re: My first post and a question
Hey Jay, welcome! Take a look at this thread here.
viewtopic.php?f=2&t=86088&hilit=What+torx+but+set
viewtopic.php?f=2&t=86088&hilit=What+torx+but+set
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: My first post and a question
Welcome and enjoy your new spydies! Lots of great recommendations for good torx bit sets in the thread linked above. For most spydies you'll only need a #6, #8, and/or a #10. Occasionally you'll run into a situation where you need two of a certain size.
- Julia
"Be excellent to each other." - Bill S. Preston, Esq.
"Be excellent to each other." - Bill S. Preston, Esq.
- JonLeBlanc
- Member
- Posts: 1756
- Joined: Sun May 13, 2018 8:00 am
- Location: Louisiana
Re: My first post and a question
Welcome
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: My first post and a question
Welcome aboard.
And I have never once regretted getting a set of Wiha torx drivers. Was using them just the other day.
And I have never once regretted getting a set of Wiha torx drivers. Was using them just the other day.
Re: My first post and a question
I bought a set of WIHA bits last month:
https://www.amazon.com/gp/product/B001U ... UTF8&psc=1
I thought they were priced right for a product made in Germany, as shown in the photo at the time, but my case was not labelled "Made in Germany".
The blister pack card said, "Made with Global components by Wiha in Germany, Vietnam, and Taiwan."
They seem to be OK quality, although I've only used them once.
I also bought a bit holder:
https://www.amazon.com/gp/product/B07XR ... UTF8&psc=1
And a tube on roll-on LocTite:
https://www.amazon.com/gp/product/B0053 ... UTF8&psc=1
Welcome to the forum.
What knives did you order?
https://www.amazon.com/gp/product/B001U ... UTF8&psc=1
I thought they were priced right for a product made in Germany, as shown in the photo at the time, but my case was not labelled "Made in Germany".
The blister pack card said, "Made with Global components by Wiha in Germany, Vietnam, and Taiwan."
They seem to be OK quality, although I've only used them once.
I also bought a bit holder:
https://www.amazon.com/gp/product/B07XR ... UTF8&psc=1
And a tube on roll-on LocTite:
https://www.amazon.com/gp/product/B0053 ... UTF8&psc=1
Welcome to the forum.
What knives did you order?
Re: My first post and a question
Welcome! :)
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: My first post and a question
Hi Jay,
Welcome to our forum. Hope you enjoy your time here.
sal
Welcome to our forum. Hope you enjoy your time here.
sal
Re: My first post and a question
Welcome!
I've been using the torx bits of a Craftsman thirty-three piece magnetic bit driver and standard bit set (comes with seven different sizes of torx bits) that I bought from Sears years ago for all of my Spyderco needs.
I've been using the torx bits of a Craftsman thirty-three piece magnetic bit driver and standard bit set (comes with seven different sizes of torx bits) that I bought from Sears years ago for all of my Spyderco needs.
Spyderco WTC #1044
“Those who cannot remember the past are condemned to repeat it.” George Santayana, The Life of Reason: The Phases of Human Progress, 1905 to 1906
NEVER FORGET!!!
“Those who cannot remember the past are condemned to repeat it.” George Santayana, The Life of Reason: The Phases of Human Progress, 1905 to 1906
NEVER FORGET!!!
Re: My first post and a question
Thank you all for the prompt responses. I will be getting myself a torx set today.
I am “stalking” the UPS truck on track my shipment. My new Spydies should be here 1-5p
Thanks again for the help.
I am “stalking” the UPS truck on track my shipment. My new Spydies should be here 1-5p
Thanks again for the help.
~A knife is like a credit card...never leave home without it!
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
- Doc Dan
- Member
- Posts: 14849
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: My first post and a question
Some Vaseline for lube on knives used on food works well. Otherwise, you need some good lube like Breakfree, Froglube, or etc.
Welcome. You will enjoy the people here.
Welcome. You will enjoy the people here.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
- Doc Dan
- Member
- Posts: 14849
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: My first post and a question
For posting pics I use postimage.org, select pic or multiple pics, click hotlink for forums, paste in your post.SpyderJay wrote: ↑Fri Jul 24, 2020 4:24 pmHey guys and gals,
I am new to the forum here, this is my first post, but have owned Spyderco knives for quite some time now. I just ordered 3 new Spyderco knives and can't wait for tomorrow (pics to follow when they arrive).
I tried searching what tools I need to maintain, change, or tighten up my knife parts - specifically the clip position - but didn't come up with anything helpful. Is there a set anyone can recommend I should get or can I just go down to hardware store?
Thanks for all the good information on here!
Stay safe,
Jay
BTW, what three did you buy?
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
- legOFwhat?
- Member
- Posts: 3148
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: My first post and a question
Hello and welcome! I'm a wiha guy as well, I keep a set in the car, one at my desk at work and have one in garage. Sometimes you need to use 2 of the same bits.
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
-
- Member
- Posts: 501
- Joined: Wed Jun 17, 2020 11:57 am
- Location: Austria / Europe
Re: My first post and a question
Welcome SpyderJay!
Will you tell us which knives you have odered?
Will you tell us which knives you have odered?
Re: My first post and a question
austrian_spyder_fan wrote: ↑Sat Jul 25, 2020 11:36 amWelcome SpyderJay!
Will you tell us which knives you have odered?
He's taunting us!
Re: My first post and a question
Sorry, I ordered the following: KaraHawk, Delica 4 lightweight combo edge,FeistyKat wrote: ↑Sat Jul 25, 2020 12:35 pmaustrian_spyder_fan wrote: ↑Sat Jul 25, 2020 11:36 amWelcome SpyderJay!
Will you tell us which knives you have odered?
He's taunting us!
and the Para 3 lightweight (all of them are black on black). Came in last night. I had the top rescue knife already shown in the photo.
~A knife is like a credit card...never leave home without it!
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
Re: My first post and a question
SpyderJay wrote: ↑Sun Jul 26, 2020 7:40 amSorry, I ordered the following: KaraHawk, Delica 4 lightweight combo edge,FeistyKat wrote: ↑Sat Jul 25, 2020 12:35 pmaustrian_spyder_fan wrote: ↑Sat Jul 25, 2020 11:36 amWelcome SpyderJay!
Will you tell us which knives you have odered?
He's taunting us!
and the Para 3 lightweight (all of them are black on black). Came in last night. I had the top rescue knife already shown in the photo.
Well, you DO like black!
The CE Delica was my first Spyderco (though with satin blade) - I still have it and have no plans to ever get rid of it.
Another black on black version I´d recommend: Manix 2 LW!
PS: And welcome to the forum of course! :)
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)