Blade HQ copper rex45 pm2

Discuss Spyderco's products and history.
User avatar
SSD_777
Member
Posts: 111
Joined: Wed Aug 23, 2017 5:54 pm

Re: Blade HQ copper rex45 pm2

Postby SSD_777 » Tue Jun 30, 2020 10:12 am

Limit is 3.

User avatar
Mushroom
Member
Posts: 2725
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Blade HQ copper rex45 pm2

Postby Mushroom » Tue Jun 30, 2020 10:12 am

Albatross wrote:
Tue Jun 30, 2020 9:09 am
Mushroom wrote:
Tue Jun 30, 2020 9:04 am
I'm convinced people will have numerous checkout bots ready to go for this one... Also, there will be a large handful of people who claim its too heavy or they don't want it but will silently end up with one anyway because they know they can flip it for a profit.

I'm just super anxious to snag one. I try to avoid the PM2 madness but I just can't resist the copper scales. If I miss this one, I'll undoubtedly be setting up a checkout bot for future knives. :rolleyes:
They might be in for a surprise, given how many people are out of work, how many more will be, and the future economic consequences of closing the world. I'd say this is a poor time to try to make a buck on luxury items, but who knows.
I'm actually glad I was wrong! :D I was able to get an order through with minimal issues. I got a 404 error page immediately after submitting my order, but fortunately it went through anyway. Then it lasted for plenty of time afterwards to secure one if that didn't work.
- Nick

:spyder:

Bigjimsax
Member
Posts: 3
Joined: Tue Jun 30, 2020 10:11 am

Re: Blade HQ copper rex45 pm2

Postby Bigjimsax » Tue Jun 30, 2020 10:13 am

Got one and they are still available. My first spyderco, I’m excited and thanks for the information posts.

User avatar
CXXX
Member
Posts: 244
Joined: Mon Aug 08, 2011 7:18 pm
Location: Thompsons Station, Tennessee

Re: Blade HQ copper rex45 pm2

Postby CXXX » Tue Jun 30, 2020 10:30 am

Sold out in 28 minutes
Thought I was out of luck with the site being so slow but I got one
Last edited by CXXX on Tue Jun 30, 2020 10:37 am, edited 1 time in total.

User avatar
Liquid Cobra
Member
Posts: 6404
Joined: Wed Jan 02, 2013 11:38 pm
Location: British Columbia, CANADA

Re: Blade HQ copper rex45 pm2

Postby Liquid Cobra » Tue Jun 30, 2020 10:33 am

That’s way longer than I expected it to take.
Most recently acquired: Paramilitary 2 Tanto, YoJUMBO, Swayback, Siren, DLC Yojimbo 2, Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!

For more of my pictures see my Instagram account.
@liquid_cobra

Rinzler
Member
Posts: 179
Joined: Sat Jan 04, 2020 11:58 am

Re: Blade HQ copper rex45 pm2

Postby Rinzler » Tue Jun 30, 2020 10:36 am

Mushroom wrote:
Tue Jun 30, 2020 9:04 am
I'm convinced people will have numerous checkout bots ready to go for this one... Also, there will be a large handful of people who claim its too heavy or they don't want it but will silently end up with one anyway because they know they can flip it for a profit.

I'm just super anxious to snag one. I try to avoid the PM2 madness but I just can't resist the copper scales. If I miss this one, I'll undoubtedly be setting up a checkout bot for future knives. :rolleyes:
I had two bots running and two other browsers open.

I was able to buy one, not with automation, but by refreshing the pages manually and clicking to check out. When site traffic is overwhelming I don't think a bot/script/automation is any type of advantage over manually checking out - except maybe if someone is trying to purchase multiples (which isn't my thing).

As I write this a script just notified me that it went out of stock at 10:31am MDT. Is that the actual time it went out of stock? Hard to say because not all automation is accurate to when something occurs in a site, but rather when the automated function runs and returns a result.

Anyhow I'm stoked because I was able to buy one and that flippy balisong pen from spyderco.

Glad you were able to snag one.

GarageBoy
Member
Posts: 1466
Joined: Sun Nov 14, 2004 6:49 pm
Location: Brooklyn NY

Re: Blade HQ copper rex45 pm2

Postby GarageBoy » Tue Jun 30, 2020 10:37 am

Cue people who didn't get one crying how they're never shopping at bhq again (until the next exclusive)

User avatar
abbazaba
Member
Posts: 3336
Joined: Mon Nov 09, 2015 3:40 pm
Location: New England

Re: Blade HQ copper rex45 pm2

Postby abbazaba » Tue Jun 30, 2020 10:45 am

Phew! The longer it was up the more I wanted to buy it just cause I want to buy PM2 everything. But I'm glad I held out. Besides, I already have a brick of a knife in my copper Natrix XL letter opener.
Last edited by abbazaba on Tue Jun 30, 2020 10:46 am, edited 1 time in total.

User avatar
kadinh
Member
Posts: 98
Joined: Wed Mar 03, 2010 2:05 pm

Re: Blade HQ copper rex45 pm2

Postby kadinh » Tue Jun 30, 2020 10:45 am

Glad I got mine. Lasted a lot longer than I thought.

AlexRus
Member
Posts: 429
Joined: Fri Jan 19, 2018 10:42 am
Location: Russia, Earth

Re: Blade HQ copper rex45 pm2

Postby AlexRus » Tue Jun 30, 2020 10:49 am

:D

Image

:D :D :D
Last edited by AlexRus on Tue Jun 30, 2020 3:29 pm, edited 1 time in total.

User avatar
sal
Member
Posts: 13675
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Blade HQ copper rex45 pm2

Postby sal » Tue Jun 30, 2020 10:52 am

Hi Bigjimsax,

Welcome to our forum.

sal

User avatar
MadmanR1
Member
Posts: 68
Joined: Sat Apr 09, 2016 3:06 pm
Location: Arizona

Re: Blade HQ copper rex45 pm2

Postby MadmanR1 » Tue Jun 30, 2020 10:53 am

I said no, but was curious how fast it would sell. About 12 minutes into watching it I bought one.

I'm such a sucker.

Back up to 4 Pm2's but still down from the 20 or so I once had.

AlexRus
Member
Posts: 429
Joined: Fri Jan 19, 2018 10:42 am
Location: Russia, Earth

Re: Blade HQ copper rex45 pm2

Postby AlexRus » Tue Jun 30, 2020 10:53 am

sal wrote:
Tue Jun 30, 2020 10:52 am
Hi Bigjimsax,

Welcome to our forum.

sal
Hi Sal! Great to see you!

User avatar
kadinh
Member
Posts: 98
Joined: Wed Mar 03, 2010 2:05 pm

Re: Blade HQ copper rex45 pm2

Postby kadinh » Tue Jun 30, 2020 10:59 am

kerrcobra wrote:
Wed Jun 24, 2020 12:12 pm
Here's my copper k390 para3:

Image
Beautiful. I have a copper Investigator too :)

koenigsegg
Member
Posts: 1466
Joined: Sun Oct 11, 2015 5:36 pm

Re: Blade HQ copper rex45 pm2

Postby koenigsegg » Tue Jun 30, 2020 11:27 am

didn't set reminder and blew it. Ugh
S30V, VG10, M4, XHP, BD1, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN

User avatar
Danke
Member
Posts: 72
Joined: Tue Jul 21, 2015 10:05 pm

Re: Blade HQ copper rex45 pm2

Postby Danke » Tue Jun 30, 2020 12:10 pm

Got one. Or at least a confirmation from BHQ that I did. Now I have to play the waiting game. Glad I did since I hit the snooze on the original orange/REX45 PM2 and then regretted it.

Now to watch all vids and fidget with my copper Maratac light and figure out how to to get the scales the "right" blue-green.

Flite
Member
Posts: 1
Joined: Tue Jun 30, 2020 12:59 pm

Re: Blade HQ copper rex45 pm2

Postby Flite » Tue Jun 30, 2020 1:03 pm

Got one! Very excited. This is my first non-S110V Spyderco product. Do we know how many were produced? I may have missed that but didn’t see it listed elsewhere.

Sumdumguy
Member
Posts: 3093
Joined: Sun Dec 03, 2017 3:51 pm

Re: Blade HQ copper rex45 pm2

Postby Sumdumguy » Tue Jun 30, 2020 1:50 pm

Darn, I missed it. :(

koenigsegg
Member
Posts: 1466
Joined: Sun Oct 11, 2015 5:36 pm

Re: Blade HQ copper rex45 pm2

Postby koenigsegg » Tue Jun 30, 2020 3:10 pm

Hoping for a second small wave to show up like the manix xl did .. hopefully
S30V, VG10, M4, XHP, BD1, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN

User avatar
CXXX
Member
Posts: 244
Joined: Mon Aug 08, 2011 7:18 pm
Location: Thompsons Station, Tennessee

Re: Blade HQ copper rex45 pm2

Postby CXXX » Tue Jun 30, 2020 3:48 pm

Anyone know how many were in this run? Maybe a higher number since they lasted 28 minutes?


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Ankerson, Cl1ff, DDK, eRoc, Majestic-12 [Bot], TkoK83Spy, Tucson Tom and 23 guests