Shaman in S110V

Discuss Spyderco's products and history.
wade7575
Member
Posts: 24
Joined: Thu Jul 20, 2017 5:58 pm

Shaman in S110V

Postby wade7575 » Tue Jun 02, 2020 5:51 pm

Has anyone heard if Spyderco is planning on releasing an S110V version of this knife,I'd love to see and S110V version what do you guys think.

User avatar
sal
Member
Posts: 13798
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Shaman in S110V

Postby sal » Tue Jun 02, 2020 5:59 pm

I'm guessing we'll see one down the road.

sal

User avatar
Evil D
Member
Posts: 22202
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: Shaman in S110V

Postby Evil D » Tue Jun 02, 2020 5:59 pm

Curious to see how those blurple scales will look on a Shaman.
SHARPEN IT LIKE YOU LOVE IT, USE IT LIKE YOU HATE IT
~David

wade7575
Member
Posts: 24
Joined: Thu Jul 20, 2017 5:58 pm

Re: Shaman in S110V

Postby wade7575 » Tue Jun 02, 2020 6:21 pm

I would love to see a Shaman S110V version because of the edge retention of and the fact it's a stainless steel so rust won't be a factor.

wade7575
Member
Posts: 24
Joined: Thu Jul 20, 2017 5:58 pm

Re: Shaman in S110V

Postby wade7575 » Tue Jun 02, 2020 6:22 pm

sal wrote:
Tue Jun 02, 2020 5:59 pm
I'm guessing we'll see one down the road.

sal
Do you have a time frame on when we might see one come out.

User avatar
sal
Member
Posts: 13798
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Shaman in S110V

Postby sal » Tue Jun 02, 2020 6:34 pm

Hi Wade,

We try to avoid committing to delivery dates as they often change for one reason or another. I can tell you it's not on my mfg schedule that I got this week, which goes to next March.

sal

User avatar
Mr Blonde
Member
Posts: 7397
Joined: Fri Sep 24, 2004 10:33 am
Location: The Netherlands, Europe, Earth
Contact:

Re: Shaman in S110V

Postby Mr Blonde » Wed Jun 03, 2020 3:51 am

Evil D wrote:
Tue Jun 02, 2020 5:59 pm
Curious to see how those blurple scales will look on a Shaman.
I was thinking the exact same thing, and with that thick handle, that would be a lot of g10!
My Spyderco Pics & Reviews: www.spydercollector.com
Last website update: 10-31-2020 - Twitter - Instagram

BLJace
Member
Posts: 68
Joined: Wed Jan 29, 2020 1:25 am

Re: Shaman in S110V

Postby BLJace » Wed Jun 03, 2020 4:38 am

sal wrote:
Tue Jun 02, 2020 6:34 pm
Hi Wade,

We try to avoid committing to delivery dates as they often change for one reason or another. I can tell you it's not on my mfg schedule that I got this week, which goes to next March.

sal
Hey Sal....

what might happen to be on that schedule hmmm?? :)
:spyder: I used to collect a lot of knives... I still do, but i used to too. :spyder:

wade7575
Member
Posts: 24
Joined: Thu Jul 20, 2017 5:58 pm

Re: Shaman in S110V

Postby wade7575 » Wed Jun 03, 2020 4:41 pm

sal wrote:
Tue Jun 02, 2020 6:34 pm
Hi Wade,

We try to avoid committing to delivery dates as they often change for one reason or another. I can tell you it's not on my mfg schedule that I got this week, which goes to next March.

sal
Can say what steels you will be releasing the Shaman in this year,I'd really like to buy one but I hate S30V I steels that are S90V and higher.

User avatar
sal
Member
Posts: 13798
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Shaman in S110V

Postby sal » Wed Jun 03, 2020 6:31 pm

Hi Wade,

I know that we have a sprint coming out with Canvas Micarta and a different steel. I know there are a number of "Exclusives" IN-the-works. The Shaman design has proven to please a few. This means there will be variations.

S90 or higher is not clear. Higher in what area, or better still whattauwant?

sal

User avatar
attila
Member
Posts: 1297
Joined: Fri Apr 29, 2016 9:20 am
Location: Maryland

Re: Shaman in S110V

Postby attila » Wed Jun 03, 2020 7:00 pm

sal wrote:
Wed Jun 03, 2020 6:31 pm
Hi Wade,

I know that we have a sprint coming out with Canvas Micarta and a different steel. I know there are a number of "Exclusives" IN-the-works. The Shaman design has proven to please a few. This means there will be variations.

S90 or higher is not clear. Higher in what area, or better still whattauwant?

sal
I know I’m not the guy you’re asking that question of, but I’ve been really wanting some K490, especially at 65+ hrc. Twice as tough as M4 and nearly as wear resistant at a given hardness. If we jack the hardness, I think it’ll hang with or surpass the “big boys” K390, 4V, and Rex 45 at the same hardness.

Not only that, but with more chromium and a cryo/low temper, it will have significantly better corrosion resistance to boot.

I can’t get any to make my own knives (I tried getting it from Bohler USA), and the one maker who used to use it stopped. I’m, therefore, stuck wishing for a steel that I might otherwise never get a chance to use.

Thanks for hearing me out, and have a great day!!
Own: Delica, yOld S30V Native, pointy Breeden Rescue, Delica, HAP40 Endura, ZDP DF2, S110V Manix LW,Pakka Delica, Cru-wear Para 3, SE H1 DF2, M4 Manix, HAP40 Caly 3, S90V Native 5, K390 Urban, Pakka DF2, Cruwear PM2, SE Pac Salt, HAP40 Jazzlica, S110V Native, P.I.T.S., DLC Manix, REX 45 PM2, Para 3, XHP Manix LW, SB Caly 3, 20CV PM2, Rhino, SB Calypso Jr., B70P, PMA11, K03, ZDP Stretch 2, Kapara, REX 45 Military, 154CM Manix LW, 204p PM2, Swick, SG Delica, BL Lil'Native, AEB-L Urban, HAP40 Stretch, KC Cruwear Manix,Cruwear Military, M390 PM2, Cruwear Delica, 4V Lil'Native, Mantra 2, CruCarta Shaman, M390 Para 3 LW, M390 Manix, K390 Police 4, RexWood Shaman, DLC Cruwear Shaman, Rex 45 Manix, Native 5, Native LW, 204p Para 3, S45VN PM2, S90V Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP Cruwear Manix

Waiting for: SPY27, K490, Swick 5, and something purple
.

User avatar
sal
Member
Posts: 13798
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Shaman in S110V

Postby sal » Wed Jun 03, 2020 7:08 pm

OK Attila,

Why do you think this? Is K490 just not being made or is the minimum too high for custom guys? It has interesting chemistry, especially the Tungsten and Vanadium.

sal

User avatar
attila
Member
Posts: 1297
Joined: Fri Apr 29, 2016 9:20 am
Location: Maryland

Re: Shaman in S110V

Postby attila » Wed Jun 03, 2020 8:46 pm

sal wrote:
Wed Jun 03, 2020 7:08 pm
OK Attila,

Why do you think this? Is K490 just not being made or is the minimum too high for custom guys? It has interesting chemistry, especially the Tungsten and Vanadium.

sal
I’ve been informed that the Bohler USA steel mill isn’t rolling anything thin enough for DIYers. I was quoted $2,400 for a 2x12x12 chunk, and that was just an off-cut and the smallest they could do. That’s way too much and too thick for an “average Joe” looking for a great steel to make a knife out of.

After studying the datasheet and other metallurgical info, this is the one steel that I think can give Cru-wear AND M4 a run for their money at the same time. Anything that challenges M4’s wear resistance and doubles it’s toughness has got to be excellent. Also, with 6.4% Cr, cryo, and a low temper, K490 should be closer to Cru-wear than M4 in corrosion resistance. It just sounds like a great steel, so K490 has been on my radar for nearly 5 years.

BTW, thank you for listening to the small guy, Sal. It means a whole bunch to me!
Own: Delica, yOld S30V Native, pointy Breeden Rescue, Delica, HAP40 Endura, ZDP DF2, S110V Manix LW,Pakka Delica, Cru-wear Para 3, SE H1 DF2, M4 Manix, HAP40 Caly 3, S90V Native 5, K390 Urban, Pakka DF2, Cruwear PM2, SE Pac Salt, HAP40 Jazzlica, S110V Native, P.I.T.S., DLC Manix, REX 45 PM2, Para 3, XHP Manix LW, SB Caly 3, 20CV PM2, Rhino, SB Calypso Jr., B70P, PMA11, K03, ZDP Stretch 2, Kapara, REX 45 Military, 154CM Manix LW, 204p PM2, Swick, SG Delica, BL Lil'Native, AEB-L Urban, HAP40 Stretch, KC Cruwear Manix,Cruwear Military, M390 PM2, Cruwear Delica, 4V Lil'Native, Mantra 2, CruCarta Shaman, M390 Para 3 LW, M390 Manix, K390 Police 4, RexWood Shaman, DLC Cruwear Shaman, Rex 45 Manix, Native 5, Native LW, 204p Para 3, S45VN PM2, S90V Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP Cruwear Manix

Waiting for: SPY27, K490, Swick 5, and something purple
.

User avatar
RustyIron
Member
Posts: 563
Joined: Mon Mar 18, 2019 9:01 pm
Location: La Habra, CA
Contact:

Re: Shaman in S110V

Postby RustyIron » Wed Jun 03, 2020 9:24 pm

sal wrote:
Tue Jun 02, 2020 5:59 pm
I'm guessing we'll see one down the road.
I'm glad to hear that. I have coming a Manix 2 that you guys shipped out yesterday and should be arriving at my front door tomorrow. There are some that have derogatory things to say about S110V, but if you guys are still planning new knives with the material, then you must think it's good stuff. I need to carry this one around and decide for myself.

wade7575
Member
Posts: 24
Joined: Thu Jul 20, 2017 5:58 pm

Re: Shaman in S110V

Postby wade7575 » Wed Jun 03, 2020 10:57 pm

sal wrote:
Wed Jun 03, 2020 6:31 pm
Hi Wade,

I know that we have a sprint coming out with Canvas Micarta and a different steel. I know there are a number of "Exclusives" IN-the-works. The Shaman design has proven to please a few. This means there will be variations.

S90 or higher is not clear. Higher in what area, or better still whattauwant?

sal
I'd love to see one in M390 and also S110V,I know you would never do REX 121 or Terravantium but a guy can dream can't he.
I really like M390 a lot because it can take a toothy or polished edge and it's edge is very aggressive.

https://terrain365.com/collections/terr ... m%E2%84%A2

I also just picked up a Manix 2 in M390 from Warriors and Wonders in British Columbia and I buy most of my knives there and from S&R Knives.
I have always liked the Manix 2 PM2 Military and Gayle Bradley.

When I seen they still had Manix 2 in M390 I had to grab one,I also own 2 in M4 I got from Bladehq and a S110v version I got from S&R knives and I wanted to say thank you to you Sal for making these knives I love so much.

I forget what show I was at and I seen Eric after I got my first Manix 2 at a show and when I was leaving your booth he told me he was the one who designed the Manix 2 and you could tell he was so proud of his design,that first Manix 2 I gave to my Dad.

User avatar
Evil D
Member
Posts: 22202
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: Shaman in S110V

Postby Evil D » Fri Jun 05, 2020 6:46 am

sal wrote:
Wed Jun 03, 2020 6:31 pm
or better still whattauwant?

sal


I'd probably buy a Salt version in SE LC200N

🤷‍♂️
SHARPEN IT LIKE YOU LOVE IT, USE IT LIKE YOU HATE IT
~David

User avatar
sal
Member
Posts: 13798
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: Shaman in S110V

Postby sal » Fri Jun 05, 2020 8:50 am

Thanx Attila, Wade,

I'll keep your suggestions in mind.

sal

TomAiello
Member
Posts: 4583
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Shaman in S110V

Postby TomAiello » Fri Jun 05, 2020 9:31 am

wade7575 wrote:
Wed Jun 03, 2020 10:57 pm
I'd love to see one in M390 and also S110V,I know you would never do REX 121 or Terravantium but a guy can dream can't he.
I own a knife in REX 121 and I'd say that Spyderco's Maxamet is just as good.

I don't think I'd want a Shaman in Maxamet, but the Maxamet Manix has been (for me) functionally just the same as a REX 121 Manix.

ugaarguy
Member
Posts: 980
Joined: Mon Feb 17, 2014 10:07 pm
Location: Indiana

Re: Shaman in S110V

Postby ugaarguy » Fri Jun 05, 2020 1:49 pm

Evil D wrote:
Fri Jun 05, 2020 6:46 am
sal wrote:
Wed Jun 03, 2020 6:31 pm
or better still whattauwant?

sal


I'd probably buy a Salt version in SE LC200N

🤷‍♂️
I'd also be interested in that variant.

User avatar
attila
Member
Posts: 1297
Joined: Fri Apr 29, 2016 9:20 am
Location: Maryland

Re: Shaman in S110V

Postby attila » Fri Jun 05, 2020 1:51 pm

Thank you, Sal!
Own: Delica, yOld S30V Native, pointy Breeden Rescue, Delica, HAP40 Endura, ZDP DF2, S110V Manix LW,Pakka Delica, Cru-wear Para 3, SE H1 DF2, M4 Manix, HAP40 Caly 3, S90V Native 5, K390 Urban, Pakka DF2, Cruwear PM2, SE Pac Salt, HAP40 Jazzlica, S110V Native, P.I.T.S., DLC Manix, REX 45 PM2, Para 3, XHP Manix LW, SB Caly 3, 20CV PM2, Rhino, SB Calypso Jr., B70P, PMA11, K03, ZDP Stretch 2, Kapara, REX 45 Military, 154CM Manix LW, 204p PM2, Swick, SG Delica, BL Lil'Native, AEB-L Urban, HAP40 Stretch, KC Cruwear Manix,Cruwear Military, M390 PM2, Cruwear Delica, 4V Lil'Native, Mantra 2, CruCarta Shaman, M390 Para 3 LW, M390 Manix, K390 Police 4, RexWood Shaman, DLC Cruwear Shaman, Rex 45 Manix, Native 5, Native LW, 204p Para 3, S45VN PM2, S90V Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP Cruwear Manix

Waiting for: SPY27, K490, Swick 5, and something purple
.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: 5-by-5, abbazaba, Abyss_Fish, Accutron, cali, chrisb507, erikols, eRoc, Evil D, Google [Bot], kobold, Pickmansmodel82, Rp5, steelcity16 and 101 guests