More Jazzlicas!

Discuss Spyderco's products and history.
User avatar
JustinB
Member
Posts: 119
Joined: Sun Jan 14, 2018 8:26 pm
Location: Nova Scotia

More Jazzlicas!

Postby JustinB » Sat Feb 15, 2020 8:22 am

I've been carrying my Jazzlica a lot recently and have been really wishing for some more variations on this model. Is there any chance in seeing a production ZDP or K390 version anytime soon?

User avatar
Jazz
Member
Posts: 7590
Joined: Sun Jul 01, 2007 7:46 pm
Location: Alberta, Canada

Re: More Jazzlicas!

Postby Jazz » Sat Feb 15, 2020 8:54 am

Those are the two I’m hoping for too. Especially K390. I hope it’s in the set, and isn’t last to release.
- best wishes, Jazz.

User avatar
steelcity16
Member
Posts: 3377
Joined: Mon Dec 11, 2017 11:34 am

Re: More Jazzlicas!

Postby steelcity16 » Sat Feb 15, 2020 10:36 am

I am hoping for a Cruwear version to match my Cruwear Delica. That is pretty much the only knife I carry these days. I'd try a K390 Jazzlica if it makes it into the new series, which I am hoping it does!
:spyder: CRU-CARTA THEM ALL! :spyder:

TomAiello
Member
Posts: 3750
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: More Jazzlicas!

Postby TomAiello » Sat Feb 15, 2020 11:54 am

K390 for the win!

Jazzlica is the only Delica version I still have in my rotation.

User avatar
elena86
Member
Posts: 2685
Joined: Fri Sep 03, 2010 6:59 am
Location: Somewhere in Europe

Re: More Jazzlicas!

Postby elena86 » Sat Feb 15, 2020 12:06 pm

LC200N in spyderedge :eek:
Marius

" A mind all logic is like a knife all blade. It makes the hand bleed that uses it " ( Rabindranath Tagore )

JMM
Member
Posts: 390
Joined: Wed Sep 04, 2019 8:39 pm
Location: Pacific Northwest (OR)

Re: More Jazzlicas!

Postby JMM » Sat Feb 15, 2020 12:08 pm

Query:. Jazzlica?

User avatar
PeaceInOurTime
Member
Posts: 486
Joined: Sun Apr 07, 2019 7:37 am

Re: More Jazzlicas!

Postby PeaceInOurTime » Sat Feb 15, 2020 12:22 pm

JMM wrote:
Sat Feb 15, 2020 12:08 pm
Query:. Jazzlica?

Wharncliffe Delica :)

https://forum.spyderco.com/viewtopic.php?f=2&t=70607
+ Wanna see knives in use? Visit my YouTube channel: https://www.youtube.com/channel/UC3z6R5 ... hrIn41j14A
+ I'm currently participating in a serrated edge only challenge for 2020: viewtopic.php?f=2&t=85560
+ "Wouldn't it be tight if everyone was chill to each other?" -Gryzzl (Parks and Recreation)
+ "Don't ever, for any reason, do anything, to anyone, for any reason, ever, no matter what, no matter where, or who, or who you are with, or where you are going, or where you've been, ever, for any reason whatsoever." -Michael Scott (The Office US)

User avatar
Haunted House
Member
Posts: 127
Joined: Wed Sep 25, 2019 5:02 pm

Re: More Jazzlicas!

Postby Haunted House » Sat Feb 15, 2020 10:51 pm

Fingers crossed for a K390 Wharncliffe Delica.
I’d likely buy 3 of them right off the bat.
Team Wharncliffe

User avatar
sal
Member
Posts: 12811
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: More Jazzlicas!

Postby sal » Sat Feb 15, 2020 11:13 pm

Hi JMM,

The current model of the Warncliffe Delica was requested, promoted and was the driving force behind our making of a Warncliffe Delica was created by Jazz. He presented rational argument for the effectiveness of such a model in his work. We made a prototype for him to test. He approved of the prototype so we made it part of the regular line.

We are currently planning a run of the Endura family in K390. I'm pretty sure the Warnie Delica is part of the run. I'll push for it.

sal

User avatar
Mushroom
Member
Posts: 2101
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: More Jazzlicas!

Postby Mushroom » Sat Feb 15, 2020 11:16 pm

Love to hear it! Thanks Sal! :D
- Nick

:spyder:

User avatar
Spydergirl88
Member
Posts: 6030
Joined: Fri Jul 17, 2015 12:42 pm

Re: More Jazzlicas!

Postby Spydergirl88 » Sat Feb 15, 2020 11:24 pm

Paging Jazz....
Team Wire Clip
:spyder: :spyder: :spyder: :spyder: :spyder:

hovan2yourknives
Member
Posts: 151
Joined: Tue Dec 06, 2016 6:48 pm
Location: Rockland County, NY
Contact:

Re: More Jazzlicas!

Postby hovan2yourknives » Sat Feb 15, 2020 11:59 pm

This is great to hear!! I’ll definitely be all over a Wharnie Delica in another variant. Such a useful blade...

koenigsegg
Member
Posts: 1300
Joined: Sun Oct 11, 2015 5:36 pm

Re: More Jazzlicas!

Postby koenigsegg » Sun Feb 16, 2020 1:13 am

I sharpened mine the other day, stupid sharp now. Was going to carry it at work but as a secondary knife it sticks out too far so I've been carrying the UKPK instead. I wish it had a wire clip but id still probably bite on a nice steel option.
S30V, VG10, M4, XHP, BD1, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N

Igi964
Member
Posts: 333
Joined: Fri Oct 07, 2011 5:10 am
Location: Slovakia

Re: More Jazzlicas!

Postby Igi964 » Sun Feb 16, 2020 1:24 am

Oh yeah. Thank You Sal. K390 wharncliffe will be awsome and tireless work knife.

JMM
Member
Posts: 390
Joined: Wed Sep 04, 2019 8:39 pm
Location: Pacific Northwest (OR)

Re: More Jazzlicas!

Postby JMM » Sun Feb 16, 2020 2:41 am

sal wrote:
Sat Feb 15, 2020 11:13 pm
Hi JMM,

The current model of the Warncliffe Delica was requested, promoted and was the driving force behind our making of a Warncliffe Delica was created by Jazz. He presented rational argument for the effectiveness of such a model in his work. We made a prototype for him to test. He approved of the prototype so we made it part of the regular line.

We are currently planning a run of the Endura family in K390. I'm pretty sure the Warnie Delica is part of the run. I'll push for it.

sal
That is so awesome to hear, I am in for pretty much anything and everything made with K390, ever since I bought my P4 g10, K390 has been a favourite steel for me!
A wharnie PE & SE delica in K390 will have a permanent home in my left pocket... So happy! :)

User avatar
JustinB
Member
Posts: 119
Joined: Sun Jan 14, 2018 8:26 pm
Location: Nova Scotia

Re: More Jazzlicas!

Postby JustinB » Sun Feb 16, 2020 5:46 am

sal wrote:
Sat Feb 15, 2020 11:13 pm

We are currently planning a run of the Endura family in K390. I'm pretty sure the Warnie Delica is part of the run. I'll push for it.

sal
YESSS! I was already excited for the leaf blade K390 Endura and Delica, but having a K390 wharnie too? I'll take at least three :spyder: :spyder: :spyder:

User avatar
Jazz
Member
Posts: 7590
Joined: Sun Jul 01, 2007 7:46 pm
Location: Alberta, Canada

Re: More Jazzlicas!

Postby Jazz » Sun Feb 16, 2020 8:09 am

Sal, you are awesome. Tell Eric he's awesome too. :cool: I will love this knife, and the color is very cool too.
- best wishes, Jazz.

User avatar
elena86
Member
Posts: 2685
Joined: Fri Sep 03, 2010 6:59 am
Location: Somewhere in Europe

Re: More Jazzlicas!

Postby elena86 » Sun Feb 16, 2020 10:08 am

sal wrote:
Sat Feb 15, 2020 11:13 pm
Hi JMM,

The current model of the Warncliffe Delica was requested, promoted and was the driving force behind our making of a Warncliffe Delica was created by Jazz. He presented rational argument for the effectiveness of such a model in his work. We made a prototype for him to test. He approved of the prototype so we made it part of the regular line.

We are currently planning a run of the Endura family in K390. I'm pretty sure the Warnie Delica is part of the run. I'll push for it.

sal

Any serrations on the horizon Sal ?
Marius

" A mind all logic is like a knife all blade. It makes the hand bleed that uses it " ( Rabindranath Tagore )

User avatar
JustinB
Member
Posts: 119
Joined: Sun Jan 14, 2018 8:26 pm
Location: Nova Scotia

Re: More Jazzlicas!

Postby JustinB » Sun Feb 16, 2020 10:57 am

elena86 wrote:
Sun Feb 16, 2020 10:08 am
Any serrations on the horizon Sal ?
I'm pretty sure I read somewhere that serrations on K390 aren't really feasible. It is just too hard and not tough enough to handle serrated edges

User avatar
Wartstein
Member
Posts: 4768
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: More Jazzlicas!

Postby Wartstein » Sun Feb 16, 2020 11:58 am

sal wrote:
Sat Feb 15, 2020 11:13 pm
.....

We are currently planning a run of the Endura family in K390. I'm pretty sure the Warnie Delica is part of the run. I'll push for it.

sal
Also for an SE version? :rolleyes:

(Though I don't know if K390 would be a good steel for SE blades. Both for the maker and the user...)
Top three going by pocket-time: Endura 4 in VG 10/Micarta-scales; Stretch 1 in VG 10; Endura 4 in HAP 40


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], gundamaniac, Majestic-12 [Bot] and 10 guests