Spyderco Models From 2010 & Earlier That You Wish To Return
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Definitely the Wegner Ocelot. One of the most ergonomic designs ever, especially for controlled cutting with that forward jimping. I'd like to see the steel upgraded (Spy27?) and a wire clip. The backlock was pretty dialed in so I'd keep that. But the open paw prints collected a lot of detritus (blood, dirt), so maybe that part could be tweaked a little. I have no hope of this ever happening, but I sure wish it would.
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
The original Chinook. Love the look of that knife!
Also.. the Lil Temp 1 & 2.
Also.. the Lil Temp 1 & 2.
Rick H.
..well, that escalated quickly..
..well, that escalated quickly..
-
- Member
- Posts: 3558
- Joined: Thu Jul 19, 2018 8:59 pm
- Location: Julian Pennsylvania USA Earth
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
The Ayoob knife.
Barry
Bonne Journey!
For the word of God is living and powerful, and sharper than any two edged sword
Do what you can, where you are, with what you have! Theodore Roosevelt
MNOSD member 0032
Bonne Journey!
For the word of God is living and powerful, and sharper than any two edged sword
Do what you can, where you are, with what you have! Theodore Roosevelt
MNOSD member 0032
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Serrated Edge Military
This seems like a no brainer. The Military is still a current model. There has not been a SE Military in forever. Customers are always asking for a new military here in the forum.
This seems like a no brainer. The Military is still a current model. There has not been a SE Military in forever. Customers are always asking for a new military here in the forum.
Make time for the important things in life, and learn to enjoy the little things more.
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Jess Horn
Old School SS SE Police with titanium handle
Old School SS SE Police with titanium handle
Marius
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
The OCELOT was truly a great blade design. I just didn't like that original handle with the indented paw prints. But an OCELOT with a solid G-10 or Micarta handle would be a great "hunter-folder". I really liked all those Wegner designs but they would also need to make it in a newer/better blade steel.olywa wrote: ↑Wed Jan 29, 2020 8:19 amDefinitely the Wegner Ocelot. One of the most ergonomic designs ever, especially for controlled cutting with that forward jimping. I'd like to see the steel upgraded (Spy27?) and a wire clip. The backlock was pretty dialed in so I'd keep that. But the open paw prints collected a lot of detritus (blood, dirt), so maybe that part could be tweaked a little. I have no hope of this ever happening, but I sure wish it would.
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
That one really baffles me to no end :confused: There have been so many requests for the return of the fully serrated Military model I just don't get why they don't offer it again. Sales would not be a problem at all. And I've noticed on three other forums that many guys want to see the SE Military model return. And they could make it with 440V blade steel if they have left over stock. Because 440V was a great steel for serrated/Spyderedges.
Also I would really be interested in a Military model with a combo edge. The blade on the C-36 Military is by far big enough to accommodate a combo edge.
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Bring back the original stainless steel Stretch, only replace the Kraton inlays with checkered Dymondwood or something similar. It was the most compact, and to me is still the most pocket friendly, version of the Stretch. Keep it VG-10 and offer it in PE only, as that was the best selling version by far.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
I'd buy thisThe Deacon wrote: ↑Wed Jan 29, 2020 9:50 amBring back the original stainless steel Stretch, only replace the Kraton inlays with checkered Dymondwood or something similar. It was the most compact, and to me is still the most pocket friendly, version of the Stretch. Keep it VG-10 and offer it in PE only, as that was the best selling version by far.
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
I just wish that I could vote multiple times for this. Everything that you say makes perfect sense.
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
-
- Member
- Posts: 12634
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
R U kidding?
The Hossom Fixed Blade Series of course :D
Made in both 3V and 4V
That would be SLICK!!!
The Hossom Fixed Blade Series of course :D
Made in both 3V and 4V
That would be SLICK!!!
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Jester....maybe in h1 or lc200n?
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Also maybe a swick in h1 or lc200n
- RadioactiveSpyder
- Member
- Posts: 4534
- Joined: Sat Mar 30, 2013 9:48 pm
- Location: Lost in space
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
I have asked Sal and Eric several times in person for two years now to make a full size Jess Horn sprint. I’d be very happy with it having the same dark gray G10 and VG-10 like the recent Baby Horn sprint (which is still in stock at many dealers). The Baby version is great but the full size model is where it’s at. :)
It's better to be good than evil, but one achieves goodness at a terrific cost. ––– Stephen King
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
The Swick 5 should be announced any time now and it's even going to have LC200N!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Q
R (with skeletonized blade)
bolstered Persian and mini Persian
R (with skeletonized blade)
bolstered Persian and mini Persian
Oh dang, that would be fantastic. I'd buy both in a heartbeat.
Since compression locks are all the rage these days, maybe do a run of comp lock Ocelots, similar to the prototypes?olywa wrote: ↑Wed Jan 29, 2020 8:19 amDefinitely the Wegner Ocelot. One of the most ergonomic designs ever, especially for controlled cutting with that forward jimping. I'd like to see the steel upgraded (Spy27?) and a wire clip. The backlock was pretty dialed in so I'd keep that. But the open paw prints collected a lot of detritus (blood, dirt), so maybe that part could be tweaked a little. I have no hope of this ever happening, but I sure wish it would.
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
The one that I'd like to see return is the D'holder Toad. Updated in Titanium and a modern steel of course.
It's the one that got away, and I've never had luck with purchases on the secondary market so i shy away from getting one that way.
Grizz
It's the one that got away, and I've never had luck with purchases on the secondary market so i shy away from getting one that way.
Grizz
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Need a Q, I carried one for so long, was so lightweight, easy to open and close.
- VooDooChild
- Member
- Posts: 2617
- Joined: Wed Feb 21, 2018 1:29 am
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
Not sure on the years, but a SpydeRench would be awesome.
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: Spyderco Models From 2010 & Earlier That You Wish To Return
I noticed the resemblance of the siren and the Goddard as well. Interested to see how it ends up since the c16lw is one of my favorite spydercos of all time.rybu0305 wrote: ↑Tue Jan 28, 2020 7:13 amLarge Goddard
Compression centofante (I think it was called the Vesuvius)
Large Lum
I would love another opportunity to buy the HAP40 Lum Tanto that BladeHQ had.
EDIT: I just realized after posting this how similar the profile is between the Goddard and Siren. I can’t post a picture right now but they are almost identical. Makes me more excited about the Siren.