Me too...
First Spyderco knife to obtain in 2020?
Re: First Spyderco knife to obtain in 2020?
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: First Spyderco knife to obtain in 2020?
Bought a new dragonfly salt, a back up junction and a small spydie pack
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Re: First Spyderco knife to obtain in 2020?
The first Spydie for me in 2020 has been the Sage 5 LW...
Re: First Spyderco knife to obtain in 2020?
Can you get a picture for me, if it's not a problem? :)
-
- Member
- Posts: 5858
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: First Spyderco knife to obtain in 2020?
Tasman Salt SE.
Looking forward to the Siren.
Looking forward to the Siren.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
Re: First Spyderco knife to obtain in 2020?
No problem. The bd1n SE:
And the m390:
No real blade play in either, both drop shut and flick open easily.
- Julia
"Be excellent to each other." - Bill S. Preston, Esq.
"Be excellent to each other." - Bill S. Preston, Esq.
Re: First Spyderco knife to obtain in 2020?
Thank you. First one is fine for me, but the M390 is kinda creepy :) but the color is sooooo gorgeus!
Re: First Spyderco knife to obtain in 2020?
I am not a Para 3 - guy, but don´t all the LWs have a somewhat offcentered blade (without that being a practical problem by any means)? Maybe due to the particular way this knife is constructed?
I seem to remember hearing or reading this in quite a few reviews or first impressions vids... ?!
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: First Spyderco knife to obtain in 2020?
You mean all the comp lock ones? My sage 5 lw is slightly off-center. And the bd1n para3 lw I gave my brother was also slightly off-center. The m390 one is the worst I've had, but again, it hasn't been a problem other than aesthetically.Wartstein wrote: ↑Sat Jan 04, 2020 11:00 amI am not a Para 3 - guy, but don´t all the LWs have a somewhat offcentered blade (without that being a practical problem by any means)? Maybe due to the particular way this knife is constructed?
I seem to remember hearing or reading this in quite a few reviews or first impressions vids... ?!
- Julia
"Be excellent to each other." - Bill S. Preston, Esq.
"Be excellent to each other." - Bill S. Preston, Esq.
-
- Member
- Posts: 12638
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: First Spyderco knife to obtain in 2020?
The red one is way off center. No excuse for that, when a $50 Bestech is dead nutz centered.
I love Spyderco, but that's not cool.
Re: First Spyderco knife to obtain in 2020?
No, I meant just the Para 3 lightweights...JuPaul wrote: ↑Sat Jan 04, 2020 11:45 amYou mean all the comp lock ones? My sage 5 lw is slightly off-center. And the bd1n para3 lw I gave my brother was also slightly off-center. The m390 one is the worst I've had, but again, it hasn't been a problem other than aesthetically.Wartstein wrote: ↑Sat Jan 04, 2020 11:00 amI am not a Para 3 - guy, but don´t all the LWs have a somewhat offcentered blade (without that being a practical problem by any means)? Maybe due to the particular way this knife is constructed?
I seem to remember hearing or reading this in quite a few reviews or first impressions vids... ?!
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: First Spyderco knife to obtain in 2020?
Well, perhaps a slightly thicker washer went into this one. Personally, it doesn't bother me.MacLaren wrote: ↑Sat Jan 04, 2020 12:03 pmThe red one is way off center. No excuse for that, when a $50 Bestech is dead nutz centered.
I love Spyderco, but that's not cool.
- Julia
"Be excellent to each other." - Bill S. Preston, Esq.
"Be excellent to each other." - Bill S. Preston, Esq.
Re: First Spyderco knife to obtain in 2020?
Ah, yes, I think the para3 lw has a single washer, so they're often a bit off-center. I haven't taken apart the m390 one, though. Niw I'm curious to see if it has a thicker washer than the others, which might explain the more extreme off-centering. A project for another day...Wartstein wrote: ↑Sat Jan 04, 2020 12:12 pmNo, I meant just the Para 3 lightweights...JuPaul wrote: ↑Sat Jan 04, 2020 11:45 amYou mean all the comp lock ones? My sage 5 lw is slightly off-center. And the bd1n para3 lw I gave my brother was also slightly off-center. The m390 one is the worst I've had, but again, it hasn't been a problem other than aesthetically.Wartstein wrote: ↑Sat Jan 04, 2020 11:00 amI am not a Para 3 - guy, but don´t all the LWs have a somewhat offcentered blade (without that being a practical problem by any means)? Maybe due to the particular way this knife is constructed?
I seem to remember hearing or reading this in quite a few reviews or first impressions vids... ?!
- Julia
"Be excellent to each other." - Bill S. Preston, Esq.
"Be excellent to each other." - Bill S. Preston, Esq.
Re: First Spyderco knife to obtain in 2020?
even if it is thick - you can't do nothing about that, I presume, since there is no washer on the other side - if you replace it with the thin one, it may cause the blade playJuPaul wrote: ↑Sat Jan 04, 2020 12:28 pmAh, yes, I think the para3 lw has a single washer, so they're often a bit off-center. I haven't taken apart the m390 one, though. Niw I'm curious to see if it has a thicker washer than the others, which might explain the more extreme off-centering. A project for another day...
-
- Member
- Posts: 12638
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: First Spyderco knife to obtain in 2020?
Shoot man, just send her back to Spyderco, they'll center her up.JuPaul wrote: ↑Sat Jan 04, 2020 12:23 pmWell, perhaps a slightly thicker washer went into this one. Personally, it doesn't bother me.
Shouldn't take that long.
But, please do as you wish. This is merely a suggestion. As long as you are okay with it, that's truly all that matters.
Just providing another avenue to correct the off centering.
- Haunted House
- Member
- Posts: 280
- Joined: Wed Sep 25, 2019 5:02 pm
Re: First Spyderco knife to obtain in 2020?
Just bought my first Spyderco of 2020: Cruwear Delica :spyder:
Re: First Spyderco knife to obtain in 2020?
Right, that will be the reason most likely.JuPaul wrote: ↑Sat Jan 04, 2020 12:28 pmAh, yes, I think the para3 lw has a single washer, so they're often a bit off-center. I haven't taken apart the m390 one, though. Niw I'm curious to see if it has a thicker washer than the others, which might explain the more extreme off-centering. A project for another day...Wartstein wrote: ↑Sat Jan 04, 2020 12:12 pmNo, I meant just the Para 3 lightweights...JuPaul wrote: ↑Sat Jan 04, 2020 11:45 amYou mean all the comp lock ones? My sage 5 lw is slightly off-center. And the bd1n para3 lw I gave my brother was also slightly off-center. The m390 one is the worst I've had, but again, it hasn't been a problem other than aesthetically.Wartstein wrote: ↑Sat Jan 04, 2020 11:00 am
I am not a Para 3 - guy, but don´t all the LWs have a somewhat offcentered blade (without that being a practical problem by any means)? Maybe due to the particular way this knife is constructed?
I seem to remember hearing or reading this in quite a few reviews or first impressions vids... ?!
As said, not a Para 3 guy myself, but an a bit off center blade would not bother me at all. So to the OP:If I were you, I would not let that become a deal breaker, if you like the Para 3 LW otherwise.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: First Spyderco knife to obtain in 2020?
Hope you´ll report back, which one you like the most... :)Tapik wrote: ↑Fri Jan 03, 2020 8:27 amI found out that in the local store not too far from me they have a regular Para 3, Yojimbo 2, Delica and Chap, so I'll go and check them on tuesday, to get the size and feel, to really understand what I need.
I realized that I love the YJ2 style, but I'm afraid it's TOO BIG AND SCARY in real life.
Para 3, Delica and Chap are three very solid choices when it comes to small folders (the latter two being my personal absolute favorites in that size category - out of all brands...), so I am really interested in which route you´ll take..
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: First Spyderco knife to obtain in 2020?
My first of 2020 a zdp 189 British racing green Manbug which has arrived . Nice companion for my lady bug , Hoping for some Little bugs if you get my drift joking apart it filled a void in my collection like the colour, always wanted an MGB Roadster soft top in BRGreen this is my cheaper option anŷ excuse to buy another knife . In
Re: First Spyderco knife to obtain in 2020?
Well New to Spyderco and the forum! Im going to say Native 5 Salt LC200N!!! Like stated this was my first spyderco, i had other cheaper folders, and wanted to step up my EDC game. I was wondering if Price was worth it for just FRN and steel? Well i say a Big **** yeah!! i Can not describe how much i like this knife, Fit and finish are outstanding and as some have mentioned, the Function is just getting better with use.
I was traveling to Florida for vacation so this combo fit in Perfect! i had sand in it, cut up multiple items, Food Prep, you name it. Every time i wash it off Still looks and feels like New. the LC200N has really impressed me so far...
I Like you wanted a USA made knife specifically!! And after being on this forum and seeing how the Owners interacted i was all in. Since then i purchased a Shaman St. Nicks 4V!!!! have not unboxed it yet. im not a collector so this will pry be my extent of Spyderco purchases but i bought them to use not look at, Hopefully... That is why i went with these specific Steels.
I was traveling to Florida for vacation so this combo fit in Perfect! i had sand in it, cut up multiple items, Food Prep, you name it. Every time i wash it off Still looks and feels like New. the LC200N has really impressed me so far...
I Like you wanted a USA made knife specifically!! And after being on this forum and seeing how the Owners interacted i was all in. Since then i purchased a Shaman St. Nicks 4V!!!! have not unboxed it yet. im not a collector so this will pry be my extent of Spyderco purchases but i bought them to use not look at, Hopefully... That is why i went with these specific Steels.