Page 16 of 33

Re: Crazy Good Deals Part 2!!

Posted: Sun Feb 09, 2020 10:47 am
by TkoK83Spy
I was fortunate enough to grab one of those Military's a couple months back. I keep checking their site weekly to see what else they may stumble across and put back on the market...granted they are all more expensive than when they orginally dropped, but KW has some fantastic exclusives.

Re: Crazy Good Deals Part 2!!

Posted: Sun Feb 09, 2020 10:49 am
by koenigsegg
TomAiello wrote:
Sun Feb 09, 2020 10:43 am
cycleguy wrote:
Sat Feb 08, 2020 10:37 am
cycleguy wrote:
Fri Feb 07, 2020 3:53 pm
TkoK83Spy wrote:
Fri Feb 07, 2020 2:07 pm
Not a great deal, but if anybody is interested KnifeWorks has their PM2 exclusive with CF scales/M4 steel available again...for $229
Yep... not a great deal but doubtful you will ever see it for less. Thanks for the heads up! 47 units, limit of 1. Now down to at least 46 units even though it says 47... likely not an active counter. Starts shipping 2/11. :spyder:

CG
These are now OOS! :eek: Didn't take long ... isn't this a third run for these???

CG
I bet they were leftovers from the 2nd run. Knifeworks has been clearing out their warehouse and retailing the held back stock. They did the same with 10 (or so) of the 204p. Military exclusives a while back.
I wonder if they keep back a certain amount for returns and after a period assume no one will be returning any? Then it would be safe to offer them.

Re: Crazy Good Deals Part 2!!

Posted: Mon Feb 10, 2020 9:36 am
by rbb2
JMM wrote:
Fri Feb 07, 2020 4:26 pm
FullFlatMind wrote:
Fri Feb 07, 2020 6:46 am
rbb2 wrote:
Thu Feb 06, 2020 2:20 pm
JMM wrote:
Sat Feb 01, 2020 9:34 pm
The standard model Shaman (S30V) for $129 with free shipping (seller has amazing feedback volume & rating)

https://www.ebay.com/itm/Spyderco-Shama ... Swv9Vcp5ua

Side note -- Much to I'm sure everyone's shock and amazement, The Knife Joker Shamans are trickling in too...
Between Ebay and Paypal buyer protection I decided it was worth the risk. I'll report back once it arrives.
Got mine earlier this week. It is legit. I was nervous about it but the seller is in Oklahoma, they have great feedback, and like you said, buyer protection.
Cool, glad to hear it, you don't get to 66k feedback @ 99.9% selling fakes in my experience....
Got it, looks legit to me. Thanks for the heads up, I'd wanted to try a Shaman and this was a good deal to get one in my hands to use for a while. It's beefy, that's for sure.

Image

Re: Crazy Good Deals Part 2!!

Posted: Mon Feb 10, 2020 11:45 am
by JMM
rbb2 wrote:
Mon Feb 10, 2020 9:36 am
JMM wrote:
Fri Feb 07, 2020 4:26 pm
FullFlatMind wrote:
Fri Feb 07, 2020 6:46 am
rbb2 wrote:
Thu Feb 06, 2020 2:20 pm


Between Ebay and Paypal buyer protection I decided it was worth the risk. I'll report back once it arrives.
Got mine earlier this week. It is legit. I was nervous about it but the seller is in Oklahoma, they have great feedback, and like you said, buyer protection.
Cool, glad to hear it, you don't get to 66k feedback @ 99.9% selling fakes in my experience....
Got it, looks legit to me. Thanks for the heads up, I'd wanted to try a Shaman and this was a good deal to get one in my hands to use for a while. It's beefy, that's for sure.

Image
Awesome, that looks on point to me, I'm glad you got one, that was my first Shaman model too, now I like every one more I can get my hands on more than the last, they are amazing, powerful tools for sure.

Cheers,

John

Re: Crazy Good Deals Part 2!!

Posted: Mon Feb 10, 2020 2:41 pm
by cycleguy
Not seeing much of the recent discontinued around but came across this: Junction, 50% MSRP, GPKnives. I've also seen a couple on ebay for a few dollars less.

CG

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 1:56 pm
by jabba359
Fradon Lock Co carbon fiber Delica in HAP40 is on sale for $126.95. They also have a $20 off coupon DELICA1, bringing the total down to $106.95. At this price, it's quite a steel! ;)

https://www.safeandlockstore.com/knives ... ber-knife/

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 2:03 pm
by TkoK83Spy
Good looking out! That really is a good deal right there.

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 2:15 pm
by Spydergirl88
Great deal!

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 2:23 pm
by bearfacedkiller
Kyle, you dirty enabler. ;)

Delica inbound!!! :D

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 2:27 pm
by JuPaul
bearfacedkiller wrote:
Tue Feb 11, 2020 2:23 pm
Kyle, you dirty enabler. ;)

Delica inbound!!! :D
Dang it! Same. And a teal dragonfly today... :o :rolleyes:

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 2:33 pm
by abbazaba
Niiiiiice :D

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 2:39 pm
by Mushroom
Thats an awesome deal for the Delica! For comparison, it was $100 at the most recent factory seconds sale. :spyder:

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 3:24 pm
by DSH007
Hahah some first class enabling going on here! Great deal, I couldn’t pass it up.

Also, shout out to Fradon Lock for possibly the fastest shipping I’ve ever received.. 15 min from my ordered placed email to “shipped” email with tracking number!! Very impressive! :)

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 3:44 pm
by Carlito555
I got one at $126 and am still happy with it at that price....

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 3:54 pm
by grubetown
If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 4:29 pm
by JuPaul
grubetown wrote:
Tue Feb 11, 2020 3:54 pm
If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks
Can't say for certain, but I recently swapped a bunch of different delica blades and didn't have any issues.

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 4:49 pm
by Sharp Guy
How much did the Fraden Lock Delica originally sell for? Great deal regardless. I now have one inbound too

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 5:14 pm
by Capt'n Boatsalot
Hoping I can hold off on the CF Delica in HAP40... But that's a great price.

Can anyone comment on the weight / feel of the CF version relative to the G10 Delica? This looks like the smooth type of CF (a la the Caly) compared to the textured type on the Bradleys and the Golden CF models. Accurate?

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 6:44 pm
by NorthShoreBoiBoi
JuPaul wrote:
Tue Feb 11, 2020 4:29 pm
grubetown wrote:
Tue Feb 11, 2020 3:54 pm
If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks
Can't say for certain, but I recently swapped a bunch of different delica blades and didn't have any issues.
I tried swapping a blade from the damascus frn delica to the CF scales and it wouldnt safely lock by acting like a slip joint. This was the only combo I tried, so it could be something weird with either platform or me doing something wrong. Maybe i'll try some other blades tomorrow and report back

Re: Crazy Good Deals Part 2!!

Posted: Tue Feb 11, 2020 6:57 pm
by JMM
It is the smooth as glass CF, I personally do not care for it at all, I'm all about the CF texture on something like the Sage3, but not this kind -- I know some folks really like it, it's just not for me...