Spyderco Forums

I was fortunate enough to grab one of those Military's a couple months back. I keep checking their site weekly to see what else they may stumble across and put back on the market...granted they are all more expensive than when they orginally dropped, but KW has some fantastic exclusives.

TomAiello wrote: ↑

Sun Feb 09, 2020 10:43 am

cycleguy wrote: ↑

Sat Feb 08, 2020 10:37 am

cycleguy wrote: ↑

Fri Feb 07, 2020 3:53 pm

TkoK83Spy wrote: ↑

Fri Feb 07, 2020 2:07 pm

Not a great deal, but if anybody is interested KnifeWorks has their PM2 exclusive with CF scales/M4 steel available again...for $229

Yep... not a great deal but doubtful you will ever see it for less. Thanks for the heads up! 47 units, limit of 1. Now down to at least 46 units even though it says 47... likely not an active counter. Starts shipping 2/11. :spyder:

CG

These are now OOS! :eek: Didn't take long ... isn't this a third run for these???

CG

I bet they were leftovers from the 2nd run. Knifeworks has been clearing out their warehouse and retailing the held back stock. They did the same with 10 (or so) of the 204p. Military exclusives a while back.

I wonder if they keep back a certain amount for returns and after a period assume no one will be returning any? Then it would be safe to offer them.

JMM wrote: ↑

Fri Feb 07, 2020 4:26 pm

FullFlatMind wrote: ↑

Fri Feb 07, 2020 6:46 am

rbb2 wrote: ↑

Thu Feb 06, 2020 2:20 pm

JMM wrote: ↑

Sat Feb 01, 2020 9:34 pm

The standard model Shaman (S30V) for $129 with free shipping (seller has amazing feedback volume & rating)

https://www.ebay.com/itm/Spyderco-Shama ... Swv9Vcp5ua

Side note -- Much to I'm sure everyone's shock and amazement, The Knife Joker Shamans are trickling in too...

Between Ebay and Paypal buyer protection I decided it was worth the risk. I'll report back once it arrives.

Got mine earlier this week. It is legit. I was nervous about it but the seller is in Oklahoma, they have great feedback, and like you said, buyer protection.

Cool, glad to hear it, you don't get to 66k feedback @ 99.9% selling fakes in my experience....

Got it, looks legit to me. Thanks for the heads up, I'd wanted to try a Shaman and this was a good deal to get one in my hands to use for a while. It's beefy, that's for sure.

rbb2 wrote: ↑

Mon Feb 10, 2020 9:36 am

JMM wrote: ↑

Fri Feb 07, 2020 4:26 pm

FullFlatMind wrote: ↑

Fri Feb 07, 2020 6:46 am

rbb2 wrote: ↑

Thu Feb 06, 2020 2:20 pm

Between Ebay and Paypal buyer protection I decided it was worth the risk. I'll report back once it arrives.

Got mine earlier this week. It is legit. I was nervous about it but the seller is in Oklahoma, they have great feedback, and like you said, buyer protection.

Cool, glad to hear it, you don't get to 66k feedback @ 99.9% selling fakes in my experience....

Got it, looks legit to me. Thanks for the heads up, I'd wanted to try a Shaman and this was a good deal to get one in my hands to use for a while. It's beefy, that's for sure.

Awesome, that looks on point to me, I'm glad you got one, that was my first Shaman model too, now I like every one more I can get my hands on more than the last, they are amazing, powerful tools for sure.

Cheers,

John

Not seeing much of the recent discontinued around but came across this: Junction, 50% MSRP, GPKnives. I've also seen a couple on ebay for a few dollars less.

CG

Fradon Lock Co carbon fiber Delica in HAP40 is on sale for $126.95. They also have a $20 off coupon DELICA1, bringing the total down to $106.95. At this price, it's quite a steel!

https://www.safeandlockstore.com/knives ... ber-knife/

Good looking out! That really is a good deal right there.

Great deal!

Kyle, you dirty enabler.

Delica inbound!!! :D

bearfacedkiller wrote: ↑

Tue Feb 11, 2020 2:23 pm

Kyle, you dirty enabler.

Delica inbound!!! :D

Dang it! Same. And a teal dragonfly today... :o :rolleyes:

Niiiiiice :D

Thats an awesome deal for the Delica! For comparison, it was $100 at the most recent factory seconds sale. :spyder:

Hahah some first class enabling going on here! Great deal, I couldn’t pass it up.

Also, shout out to Fradon Lock for possibly the fastest shipping I’ve ever received.. 15 min from my ordered placed email to “shipped” email with tracking number!! Very impressive! :)

I got one at $126 and am still happy with it at that price....

If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks

grubetown wrote: ↑

Tue Feb 11, 2020 3:54 pm

If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks

Can't say for certain, but I recently swapped a bunch of different delica blades and didn't have any issues.

How much did the Fraden Lock Delica originally sell for? Great deal regardless. I now have one inbound too

Hoping I can hold off on the CF Delica in HAP40... But that's a great price.

Can anyone comment on the weight / feel of the CF version relative to the G10 Delica? This looks like the smooth type of CF (a la the Caly) compared to the textured type on the Bradleys and the Golden CF models. Accurate?

JuPaul wrote: ↑

Tue Feb 11, 2020 4:29 pm

grubetown wrote: ↑

Tue Feb 11, 2020 3:54 pm

If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks

Can't say for certain, but I recently swapped a bunch of different delica blades and didn't have any issues.

I tried swapping a blade from the damascus frn delica to the CF scales and it wouldnt safely lock by acting like a slip joint. This was the only combo I tried, so it could be something weird with either platform or me doing something wrong. Maybe i'll try some other blades tomorrow and report back

It is the smooth as glass CF, I personally do not care for it at all, I'm all about the CF texture on something like the Sage3, but not this kind -- I know some folks really like it, it's just not for me...