Crazy Good Deals Part 2!!

Discuss Spyderco's products and history.
User avatar
TkoK83Spy
Member
Posts: 12445
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Crazy Good Deals Part 2!!

#301

Post by TkoK83Spy »

I was fortunate enough to grab one of those Military's a couple months back. I keep checking their site weekly to see what else they may stumble across and put back on the market...granted they are all more expensive than when they orginally dropped, but KW has some fantastic exclusives.
15 :bug-red 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut

-Rick
koenigsegg
Member
Posts: 1559
Joined: Sun Oct 11, 2015 5:36 pm

Re: Crazy Good Deals Part 2!!

#302

Post by koenigsegg »

TomAiello wrote:
Sun Feb 09, 2020 10:43 am
cycleguy wrote:
Sat Feb 08, 2020 10:37 am
cycleguy wrote:
Fri Feb 07, 2020 3:53 pm
TkoK83Spy wrote:
Fri Feb 07, 2020 2:07 pm
Not a great deal, but if anybody is interested KnifeWorks has their PM2 exclusive with CF scales/M4 steel available again...for $229
Yep... not a great deal but doubtful you will ever see it for less. Thanks for the heads up! 47 units, limit of 1. Now down to at least 46 units even though it says 47... likely not an active counter. Starts shipping 2/11. :spyder:

CG
These are now OOS! :eek: Didn't take long ... isn't this a third run for these???

CG
I bet they were leftovers from the 2nd run. Knifeworks has been clearing out their warehouse and retailing the held back stock. They did the same with 10 (or so) of the 204p. Military exclusives a while back.
I wonder if they keep back a certain amount for returns and after a period assume no one will be returning any? Then it would be safe to offer them.
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
User avatar
rbb2
Member
Posts: 62
Joined: Mon Apr 08, 2019 4:47 pm
Location: Iowa

Re: Crazy Good Deals Part 2!!

#303

Post by rbb2 »

JMM wrote:
Fri Feb 07, 2020 4:26 pm
FullFlatMind wrote:
Fri Feb 07, 2020 6:46 am
rbb2 wrote:
Thu Feb 06, 2020 2:20 pm
JMM wrote:
Sat Feb 01, 2020 9:34 pm
The standard model Shaman (S30V) for $129 with free shipping (seller has amazing feedback volume & rating)

https://www.ebay.com/itm/Spyderco-Shama ... Swv9Vcp5ua

Side note -- Much to I'm sure everyone's shock and amazement, The Knife Joker Shamans are trickling in too...
Between Ebay and Paypal buyer protection I decided it was worth the risk. I'll report back once it arrives.
Got mine earlier this week. It is legit. I was nervous about it but the seller is in Oklahoma, they have great feedback, and like you said, buyer protection.
Cool, glad to hear it, you don't get to 66k feedback @ 99.9% selling fakes in my experience....
Got it, looks legit to me. Thanks for the heads up, I'd wanted to try a Shaman and this was a good deal to get one in my hands to use for a while. It's beefy, that's for sure.

Image
User avatar
JMM
Member
Posts: 1489
Joined: Wed Sep 04, 2019 8:39 pm
Location: Pacific Northwest, USA, Earth

Re: Crazy Good Deals Part 2!!

#304

Post by JMM »

rbb2 wrote:
Mon Feb 10, 2020 9:36 am
JMM wrote:
Fri Feb 07, 2020 4:26 pm
FullFlatMind wrote:
Fri Feb 07, 2020 6:46 am
rbb2 wrote:
Thu Feb 06, 2020 2:20 pm


Between Ebay and Paypal buyer protection I decided it was worth the risk. I'll report back once it arrives.
Got mine earlier this week. It is legit. I was nervous about it but the seller is in Oklahoma, they have great feedback, and like you said, buyer protection.
Cool, glad to hear it, you don't get to 66k feedback @ 99.9% selling fakes in my experience....
Got it, looks legit to me. Thanks for the heads up, I'd wanted to try a Shaman and this was a good deal to get one in my hands to use for a while. It's beefy, that's for sure.

Image
Awesome, that looks on point to me, I'm glad you got one, that was my first Shaman model too, now I like every one more I can get my hands on more than the last, they are amazing, powerful tools for sure.

Cheers,

John
cycleguy
Member
Posts: 1487
Joined: Tue Aug 28, 2018 4:46 pm
Location: Arvada, coloRADo

Re: Crazy Good Deals Part 2!!

#305

Post by cycleguy »

Not seeing much of the recent discontinued around but came across this: Junction, 50% MSRP, GPKnives. I've also seen a couple on ebay for a few dollars less.

CG
So many knives - so little funds!!!
User avatar
jabba359
Member
Posts: 4958
Joined: Fri Feb 10, 2006 11:07 pm
Location: North Hollywood, CA U.S.A. Earth
Contact:

Re: Crazy Good Deals Part 2!!

#306

Post by jabba359 »

Fradon Lock Co carbon fiber Delica in HAP40 is on sale for $126.95. They also have a $20 off coupon DELICA1, bringing the total down to $106.95. At this price, it's quite a steel! ;)

https://www.safeandlockstore.com/knives ... ber-knife/
-Kyle

:bug-red
Latest arrivals: Lava Flow CF DLC Para2, Magnacut Mule, GITD Jester

http://www.spydiewiki.com
User avatar
TkoK83Spy
Member
Posts: 12445
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Crazy Good Deals Part 2!!

#307

Post by TkoK83Spy »

Good looking out! That really is a good deal right there.
15 :bug-red 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut

-Rick
SG89
Member
Posts: 10587
Joined: Fri Jul 17, 2015 12:42 pm

Re: Crazy Good Deals Part 2!!

#308

Post by SG89 »

Great deal!
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
User avatar
bearfacedkiller
Member
Posts: 11411
Joined: Sat Jan 04, 2014 1:22 pm
Location: hiding in the woods...

Re: Crazy Good Deals Part 2!!

#309

Post by bearfacedkiller »

Kyle, you dirty enabler. ;)

Delica inbound!!! :D
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
JuPaul
Member
Posts: 4437
Joined: Thu Jun 27, 2019 7:06 am

Re: Crazy Good Deals Part 2!!

#310

Post by JuPaul »

bearfacedkiller wrote:
Tue Feb 11, 2020 2:23 pm
Kyle, you dirty enabler. ;)

Delica inbound!!! :D
Dang it! Same. And a teal dragonfly today... :o :rolleyes:
- Julia

"Be excellent to each other." - Bill S. Preston, Esq.
User avatar
abbazaba
Member
Posts: 4673
Joined: Mon Nov 09, 2015 3:40 pm
Location: New England

Re: Crazy Good Deals Part 2!!

#311

Post by abbazaba »

Niiiiiice :D
User avatar
Mushroom
Member
Posts: 7294
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Crazy Good Deals Part 2!!

#312

Post by Mushroom »

Thats an awesome deal for the Delica! For comparison, it was $100 at the most recent factory seconds sale. :spyder:
-Nick :bug-red
Image
User avatar
DSH007
Member
Posts: 1456
Joined: Fri Mar 23, 2018 4:49 pm
Location: Holden, MA

Re: Crazy Good Deals Part 2!!

#313

Post by DSH007 »

Hahah some first class enabling going on here! Great deal, I couldn’t pass it up.

Also, shout out to Fradon Lock for possibly the fastest shipping I’ve ever received.. 15 min from my ordered placed email to “shipped” email with tracking number!! Very impressive! :)
Rick H.

..well, that escalated quickly..
Carlito555
Member
Posts: 114
Joined: Thu Jan 11, 2018 8:23 pm

Re: Crazy Good Deals Part 2!!

#314

Post by Carlito555 »

I got one at $126 and am still happy with it at that price....
grubetown
Member
Posts: 57
Joined: Sat Jan 05, 2019 5:15 pm

Re: Crazy Good Deals Part 2!!

#315

Post by grubetown »

If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks
JuPaul
Member
Posts: 4437
Joined: Thu Jun 27, 2019 7:06 am

Re: Crazy Good Deals Part 2!!

#316

Post by JuPaul »

grubetown wrote:
Tue Feb 11, 2020 3:54 pm
If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks
Can't say for certain, but I recently swapped a bunch of different delica blades and didn't have any issues.
- Julia

"Be excellent to each other." - Bill S. Preston, Esq.
User avatar
Sharp Guy
Member
Posts: 8561
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: Crazy Good Deals Part 2!!

#317

Post by Sharp Guy »

How much did the Fraden Lock Delica originally sell for? Great deal regardless. I now have one inbound too
Of all the things I've lost I miss my mind the most!
User avatar
Capt'n Boatsalot
Member
Posts: 658
Joined: Mon Apr 15, 2013 10:50 pm
Location: Iowa

Re: Crazy Good Deals Part 2!!

#318

Post by Capt'n Boatsalot »

Hoping I can hold off on the CF Delica in HAP40... But that's a great price.

Can anyone comment on the weight / feel of the CF version relative to the G10 Delica? This looks like the smooth type of CF (a la the Caly) compared to the textured type on the Bradleys and the Golden CF models. Accurate?
NorthShoreBoiBoi
Member
Posts: 42
Joined: Mon Dec 10, 2018 11:07 pm

Re: Crazy Good Deals Part 2!!

#319

Post by NorthShoreBoiBoi »

JuPaul wrote:
Tue Feb 11, 2020 4:29 pm
grubetown wrote:
Tue Feb 11, 2020 3:54 pm
If I want to blade swap the Delica HAP40, does it have the same dimensions as other Delica blades? Thanks
Can't say for certain, but I recently swapped a bunch of different delica blades and didn't have any issues.
I tried swapping a blade from the damascus frn delica to the CF scales and it wouldnt safely lock by acting like a slip joint. This was the only combo I tried, so it could be something weird with either platform or me doing something wrong. Maybe i'll try some other blades tomorrow and report back
User avatar
JMM
Member
Posts: 1489
Joined: Wed Sep 04, 2019 8:39 pm
Location: Pacific Northwest, USA, Earth

Re: Crazy Good Deals Part 2!!

#320

Post by JMM »

It is the smooth as glass CF, I personally do not care for it at all, I'm all about the CF texture on something like the Sage3, but not this kind -- I know some folks really like it, it's just not for me...
Post Reply